HP Color LaserJet CM1017 User Manual

							Environmental differences or aging print cartridges might cause fluctuations in image density. The MFP
accounts for this with image stabilization control. The MFP automatically calibrates at various times to
maintain the highest level of print quality. Also request a calibration by using the HP ToolboxFX.
The MFP does not interrupt a print job to calibrate. It waits until the job is complete before calibrating or
cleaning. While the MFP is calibrating, it pauses printing for the time that is required to complete the
calibration.
NOTEThis calibration process calibrates the printer. It does not calibrate the image scanner.
Calibrate the MFP from the front control panel
1.Press Menu.
2.Press the navigation arrows until the display reads System setup. Press OK.
3.Press the navigation arrows until the display reads Print quality. Press OK.
4.Press the navigation arrows until the display reads Calibrate color. Press OK.
5.Press the navigation arrows until the display reads Calibrate now. Press OK.
6.Press OK to confirm Calibrate now.
Calibrate the MFP from the HP ToolboxFX
1.Open the HP ToolboxFX in one of these ways:
●On the desktop, double-click the HP ToolboxFX icon.
●On the Windows Start menu, click Programs (All Programs in Windows XP), click HP,
click HP Color LaserJet CM1015/CM1017 Series, click HP ToolboxFX, then click Help.
2.Click the System Settings tab then click Print Quality.
3.In the Calibration section, click Calibrate.
Clean the MFP
During the printing process, paper, toner and dust particles can accumulate inside the MFP. Over time,
this buildup can cause print-quality problems such as toner specks or smearing. This MFP has a cleaning
mode that can correct and prevent these types of problems.
ENWWMaintenance: How do I? 137
 
						

							
Clean the paper path using HP ToolboxFX
NOTEUse the following procedure to clean the paper path using the HP ToolboxFX. To clean
the engine when the computer is running an operating system that does not support
HP ToolboxFX, find \util\cleanpage on the MFP CD-ROM for instructions on the cleaning page.
1. Ensure the MFP is turned on and in the Ready state.
2. Open the HP ToolboxFX.
3. On the  Help tab, click  Troubleshooting . Follow the instructions under the Cleaning Page section.
138 Chapter 12   How do I? ENWW
 
						

							13 Managing and maintaining the
multifunction peripheral (MFP)
This MFP includes several software tools that help monitor, troubleshoot problems, and maintain the
MFP. Information about using these tools is in the following sections:
●
Information pages
●
Menu map
●
HP ToolboxFX
●
Use the embedded Web server
●
Manage supplies
●
Clean the scanner glass
●
Clean the MFP
●
Cartridge-out override
●
Change print cartridges
●
Calibrate the MFP
ENWW139
 
						

							Information pages
Special pages reside within the MFP memory. These pages help diagnose and solve MFP problems.
If the MFP language was not correctly set during installation, set the language manually so that the
pages print in one of the supported languages. Change the language by using the HP ToolboxFX.
Demo page
To print the Demo page, press Scan To and Start Scan simultaneously. A demo page can also be printed
from the HP ToolboxFX.
Configuration page
The Configuration page lists the current MFP settings and properties. Print a Configuration page from
the MFP or the HP ToolboxFX.
To print the Configuration page from the control panel
1.Press Menu.
2.Use the navigation arrows to select the Reports menu.
3.Press OK.
4.Press Left arrow or Right arrow to select Configuration report.
5.Press OK to print the Configuration Report page.
140 Chapter 13   Managing and maintaining the multifunction peripheral (MFP) ENWW
 
						

							
1.Product Information . Displays basic information about the MFP, such as the product name and
the serial number.
2. Memory . Lists memory-related information, such as the total memory that is installed.
ENWW Information pages 141
 
						

							3.Paper Settings. Lists information about the media type for each tray and about the type settings
for all the media that the MFP supports.
4.Copy Settings. Lists current MFP default copy information.
5.Product Settings. Lists information about the MFP, including the language and the company
name.
6.Installed Personalities and Options. Contains current MFP font, DIMM memory, and memory
card information.
7.Printer Settings. Displays MFP printer settings, such as color options, copies, and jam recovery
information.
8.Status Log. Displays information about MFP errors.
9.Photo Settings. Displays default photo information such as image size, number of copies, and
output color.
Supplies Status page
The Supplies Status page lists the remaining life of HP print cartridges. It also lists the estimated pages
remaining, number of pages printed, and other supplies information. A Supplies Status page can be
obtained from the MFP or the HP ToolboxFX.
To print the Supplies Status page from the control panel
1.Press Menu.
2.Use the navigation arrows to select the Reports menu.
3.Press OK.
4.Use the navigation arrows to select Supplies status page.
5.Press OK to print the Supplies Status page.
NOTESupplies information is also available through the HP ToolboxFX.
142 Chapter 13   Managing and maintaining the multifunction peripheral (MFP) ENWW
 
						

							
1.Print cartridge area . Displays a section for each of the print cartridges and provides information
about HP print cartridges. This information includes the part number for each print cartridge,
whether each print cartridge is low, and the life remaining for each print cartridge, which is
expressed as a percentage, as a graphic, and as the estimated number of pages remaining. This
information might not be provided for non-HP supplies. In some cases, if a non-HP supply is
installed, an alert message displays instead.
2. Ordering Information . Displays basic information about how to order new HP supplies.
3. Return & Recycling . Displays a link to the Web site that contains information about recycling.
Networking page (HP Color LaserJet CM1017 MFP only)
The Networking report option prints a Network configuration report.
To print the Network configuration report from the control panel
1.Press  Menu.
2. Press the navigation arrows to select the  Reports menu.
3. Press  OK.
4. Press the navigation arrows to select  Network report.
5. Press  OK to print the Network Configuration page.
ENWW Information pages 143
 
						

							
1.Network Hardware Configuration . Displays current MFP hardware configuration such as status,
hardware address, firmware datecode, link speed information, and connection timeout.
2. Enabled Features . Displays password, network protocol, memory card, LPD printing, Bonjour,
and HPSLP settings.
3. TCP/IP . Displays host, domain, and printer name, and other IP information.
4. SNMP . Displays status, version, and set/get community names.
5. Network Statistics . Displays packet and collision information.
Fonts pages
The Fonts pages provide lists of the available fonts on the MFP, including HP PostScript Level 3 fonts,
PCL fonts, and PCL6 fonts.
To print a fonts page from the control panel
1.Press  Menu.
2. Use the navigation arrows to select the  Reports menu.
3. Press  OK.
4. Use the navigation arrows to select  PS font list, or PCL font list .
5. Press  OK to print the selected Fonts page.
Usage page
The Usage Page provides information on the number and types of pages printed by the MFP.
144 Chapter 13   Managing and maintaining the multifunction peripheral (MFP) ENWW
 
						

							Print the usage page by:
1.Press Menu.
2.Press the navigation arrows to select the Reports menu.
3.Press OK.
4.Press the navigation arrows to select the Usage page.
5.Press OK to print the Usage Page.
ENWWInformation pages 145
 
						

							Menu map
The menu map lists the menu structure for each option available on the control panel.
To print a menu map
1.Press Menu.
2.Use the navigation arrows to select the Reports menu.
3.Press OK.
4.Use the navigation arrows to select Menu structure.
5.Press OK to print the Menu map.
146 Chapter 13   Managing and maintaining the multifunction peripheral (MFP) ENWW