Honda Civic 5 Owners Manual

							µµ Selecting a dif f erent f older with the
TUNE bar also deactivates this
f unction.
The SCAN f unction
samples all tracks on the disc in the
order they are recorded on the disc
(all f iles in MP3 or WMA mode). To
activate the scan feature, press and
release the SCAN button. You will
see SCAN in the side display. You
will get a 10 second sampling of each
track/f ile on the disc. Press the
SCAN button again to get out of scan
mode and play the last track sampled.
Pressing either side of the SEEK/
SKIP bar also turns of f the scan
feature.You can also select the scan feature
on the audio display. Press the
AUDIO button to view the audio
display, then push down the selector
on the interf ace dial. Push the
selector to the right to select the
scan feature. You will see TRACK
SCAN blinking on the display. To
turn off this feature, push the
selector to the right again.This feature,
when activated, samples the first file
of each f older f or 10 seconds. To
scan a f older, press the SCAN button
repeatedly. You will see F-SCAN and
the f older number blinking on the
side display.
To listen to the rest of the folder,
press and hold the SCAN button
until you hear a beep. If you do not,
the system advances to the next
f older, plays 10 seconds of it, and
continues with the remaining f olders
inthesameway.Whenthesystem
has f inished sampling the f irst f ile of
all f olders, f older scan is cancelled,
and the last f ile played continues to
play.
In MP3 or WMA mode
SCANFOLDER SCAN
Features
Audio System (on vehicles with navigation system)
286
09/01/28 18:10:45 32SMG631_291 
						

							An optional six disc changer is
available f or your vehicle. This disc
changer uses the same controls used
f or the in-dash disc player or the
radio.
You cannot select the controls on the
audio display of the navigation
system. The audio setting will be
displayed only in the side display.
The text data cannot be displayed in
thesidedisplay,soyoucanseethe
disc and track/f ile numbers only.
Load the desired discs in the
magazine, and load the magazine in
the changer according to the
instructions that came with the unit. If you turn the system of f while a
disc is playing, either with the
power/volume knob or by turning
of f the ignition switch, the disc will
stay in the drive. When you turn the
system back on, the disc will begin
playing where it lef t of f .
To play the radio when a disc is
playing, press the AM/FM button.
Press the CD button again to switch
back to the disc player. Press the eject button ( ) to
remove the disc. If you eject the disc,
but do not remove it f rom the slot,
the system will automatically reload
the disc af ter 10 seconds and put it in
pause mode. To begin playing, press
the CD button.
You can also eject the disc when the
ignition switch is of f .
To play the tape when a disc is
playing, insert a tape in the player
(optional). If a tape is in the player,
press the AUX button. Press the CD
button again to switch back to the
disc player.
CONT INUED
Features
Audio System (on vehicles with navigation system)
Operating the Optional Disc
Changer To Stop Playing a Disc
287
09/01/28 18:10:53 32SMG631_292 
						

							µ
´
µ´For inf ormation on how to handle
and protect compact discs, see page
. An MD player or changer is available
f or your vehicle as optional
equipment. This MD player/changer
uses the same controls used f or the
in-dash disc player or the radio.
Follow the instructions that came
with the unit. To select the disc changer, press the
CD/AUX button. The disc and
track/f ile numbers will be displayed.
To select a dif f erent disc, use the
preset 1 (DISC ) button or the
preset 2 (DISC ) button. To select
the previous disc, press the preset 1
(DISC ), or the preset 2 (DISC )
to select the next disc in sequence.
If you select an empty slot in the
magazine, the changer will search
f or the next available disc to load and
play.312
Features
Audio System (on vehicles with navigation system)
Protecting Discs Operating the Optional MD
Player/Changer
(For some types)
288
09/01/28 18:11:00 32SMG631_293 
						

							Thechartontherightexplainsthe
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
For additional information on
damaged discs, see page .
Theaudiosystemwilltrytoplaythe
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a dif f erent disc. If the new
disc plays, there is a problem with
the f irst disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.Error
MessageSolution Cause
313
Press the eject button, and pull out the disc.
Check if it is inserted correctly in the disc
player.
Make sure the disc is not scratched or damaged.
For more information, see page 313.
Press the eject button, and pull out the disc.
Check the disc f or damage or def ormation. For
more information, see page 313. If the disc
cannot be pulled out, or the error message does
not disappear after the disc is ejected, see your
dealer. FOCUS Error
Mechanical Error
Disc Player Error Messages
Features
Audio System (on vehicles with navigation system)
289
09/01/28 18:11:08 32SMG631_294 
						

							Thechartontherightexplainsthe
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
For additional information on
damaged discs, see page .
Theaudiosystemwilltrytoplaythe
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a dif f erent disc. If the new
disc plays, there is a problem with
the f irst disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.Solution Cause Error
Message
313Press the eject button, and remove the disc(s).
Check for an error message. Insert the disc(s)
again. If the message does not disappear or the
disc(s) cannot be removed, consult your dealer.
Press the eject button, and remove the disc(s).
Check for an error message. Insert the disc(s)
again. If the message does not disappear or the
disc(s) cannot be removed, consult your dealer. FOCUS Error
Mechanical Error
Optional Disc Changer Error
Messages
Features
Audio System (on vehicles with navigation system)
290
CDC DISC
CDC ERR 09/01/28 18:11:16 32SMG631_295 
						

							Playing an iPod
Features
Audio System (on vehicles with navigation system)
291
REPEAT BUTTON
AM/FM BUTTON CD/AUX BUTTON
INTERFACE DIALAUDIO BUTTON SIDE DISPLAY
AUDIO DISPLAY USB ICON
iPod ICON
Left-hand drive model is shown.SKIP BAR POWER/VOLUME KNOB
MAP BUTTON
CANCEL BUTTON
09/01/28 18:11:23 32SMG631_296 
						

							Î
Î The audio system reads and plays
playable sound f iles on the iPod. The
system cannot operate an iPod as a
mass storage device. The system will
only play songs stored on the iPod
with iTunes.iPods compatible with your audio
system using the USB adapter cable
are:
iPod and iTunes are registered
trademarks owned by Apple Inc. This audio system can operate the
audio f iles on the iPod with the same
controls used f or the disc player. To
play an iPod, connect it to the USB
adapter cable equipped with your
vehicle by using your dock connector,
then press the CD/AUX button. The
ignition switch must be in the
ACCESSORY (I) or ON (II) position.
The iPod can also be recharged with
the ignition switch in these positions. You can select the AUX mode by
using the navigation system voice
control buttons, but cannot operate
theplaymodefunctions.
Use only compatible iPods with the
latest f irmware. iPods that are not
compatible will not work in this audio
unit. For more inf ormation, consult
your dealer.Use the latest f irmware. :
Model
iPod 5G
iPod classic
iPod nano
iPod nano
2nd generation
iPod nano
3rd generation
iPod touch
iPhoneFirmware
Ver. 1.2 or more
Ver. 1.0 or more
Ver. 1.2 or more
Ver. 1.1.2 or more
Ver. 1.0 or more
Ver. 1.1.1 or more
Ver. 1.1.1 or more
To Play an iPod
Audio System (on vehicles with navigation system)
Features
Voice Cont rol Syst em
292
09/01/29 17:56:49 32SMG631_297 
						

							CONT INUED
Do not connect your iPod using a
hub.
DonotkeeptheiPodinthe
vehicle. Direct sunlight and high
heat will damage it.
Do not use an extension cable
between the USB adapter cable
equipped with your vehicle and
your dock connector.
We recommend backing up your
data bef ore playing it.In AAC f ormat, DRM (digital rights
management) f iles cannot be played.
If the system finds a DRM file, the
audio unit displays UNPLAYABLE,
andthenskipstothenextfile.
Open the lid of the USB adapter
cable socket. Insert the USB
adapter cable connector into it
securely.Connect your dock connector to
the iPod correctly and securely.
Install the dock connector to the
USB adapter cable securely.
1.2.
3.
Features
Audio System (on vehicles with navigation system)
Connect ing an iPod
293
NOTE:
USB ADAPTER CABLE SOCKETUSB ADAPTER
CABLE
DOCK CONNECTOR
09/01/28 18:11:42 32SMG631_298 
						

							Î
Î
When the iPod is connected and the
iPod mode is selected on the audio
system, ‘‘iPod’’ is shown in the side
display. If you selected the audio
displaybypressingtheAUDIO
button, you will see the iPod and
USB icons on the screen. Af ter
loading, you will see the Honda
mark on the iPod. That means the
operation is allowed only with the
vehicle’s audio unit controls.Thedisplaymaybechanged
depending on models or
f irmware versions.If the iPod indicator does not appear
in the audio display, check the
connections, and try to reconnect the
iPod a f ew times.
If the system still does not recognize
the iPod, it may need resetting.
Disconnect the iPod and reset it
f ollowing the iPod’s instructions.
The current f ile number is displayed
inthesidedisplay.Pressingthe
AUDIO button displays the artist,
album and track (file) names on the
navigation screen. :
Features
Audio System (on vehicles with navigation system)
294
Sample Display
OK to disconnect.
09/01/28 18:11:48 32SMG631_299 
						

							µ
CONT INUED
Use the SKIP bar while an iPod is
playing to select passages and
change f iles.
Each time you press and
releasethe sideof theSKIPbar,
the system skips forward to the
beginning of the next f ile. Press and
releasethe sideof thebar,to
skip backward to the beginning of
the current f ile. Press it again to skip
to the beginning of the previous file.
To move rapidly within a f ile, press
andholdeitherside( or )
of the SKIP bar. You can disconnect the iPod at any
time when the display on the iPod
allows to disconnect it. Always
conf irm the notice on the iPod when
to disconnect it and make sure to
f ollow the maker’s instructions to
disconnect the dock connector f rom
the USB adapter cable.
When you disconnect the iPod while
it is playing, the side display and the
audio display show NO DATA.
You can also change files with the
interf ace dial. Press the AUDIO
button to show the audio display on
the navigation screen. Push the
selector on the interface dial to the
rightsidetoskipforwardandtothe
lef t side to skip backward.
Audio System (on vehicles with navigation system)
Features
T o Change or Select Files
SK IP
295
SKIP DIRECTIONSKIP DIRECTION
09/01/28 18:11:56 32SMG631_300