Honda Civic 5 Owners Manual
Have a look at the manual Honda Civic 5 Owners Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 328 Honda manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
The automatic lighting f eature is controlledbyasensorlocatedonthe windscreen near the rearview mirror. Do not cover this sensor or spill liquids on it.The rear f og light switch is located next to the light control switch. You can use the rear f og light when the headlights are on (the light control switch is in the position).To operate the rear f og light, turn the switch up from the off ( ) position. The indicator in the instrument panel comes on to indicate that the rear fog light is on. You can turn of f the rear f og light with the headlights on by turning the switch up again. The rear f og light will go of f when you turn the headlights of f . To turn the rear f og light on again, you have to turn the rear fog light switch again with the headlights on. Headlights, Front and Rear Fog Lights Inst rument s and Cont rols (For some types) Rear Fog Light 146 LIGHTING SENSOR REAR FOG LIGHT SWITCH 09/01/28 17:51:40 32SMG631_151
The f og light switch is located next to the light control switch. You can control the f ront f og lights with this switch when the light control switch is in the or position. You can also use the rear fog light when the light control switch is in the position or the f ront f og lights are turned on.You can turn of f the rear f og light with the headlights on by turning the switch down again. You can turn of f the rear f og light with the front fog lights on by turning the switch up again.The f ront and rear f og lights will go of f when you turn the light control switch of f . If only the rear f og light is on, it will go of f when you turn the headlights of f . To turn the rear fog light on again, you have to turn the fog light switch again with the headlights on ( position) or the f ront f og lights on. To turn on the rear f og light only, turn the switch down from the OFF position. The indicator in the instrument panel comes on to indicate that the rear fog light is on. To operate the front fog lights, turn the switch up from the OFF position to the ON position. The indicator comes on as a reminder. To turn the rear f og light on with the front fog lights, turn the switch one position up f rom the position.When you turn the light control switch on again, the f ront f og lights will also turn on. To turn the f og lights completely of f , turn the f og light switch down to the OFF position. Front and Rear Fog Lights Inst rument s and Cont rols Front and Rear Fog Lights (For some types) 147 FRONT AND REAR FOG LIGHTS SWITCH 09/01/28 17:51:51 32SMG631_152
To reduce glare at night, the instrument panel illumination dims when you turn the light switch to the or position. You can adjust the brightness to the desired level with the headlight switch of f , and also with the headlight switch on. Both settings will remain at those levels until you change them. Each display (upper and lower) will illuminate with reduced brightness when you unlock and open the driver’s door, then go to normal brightness when you turn the ignition switch to the ON (II) position. If you insert the key but do not turn the ignition switch to the ON (II) position, the illumination turns of f af ter about 10 seconds. The knob on the instrument panel adjusts the brightness of the instru- ment panel. Push on the knob to pop it out, then turn it to adjust the brightness. Pushtheknobbackintoprevent your setting f rom accidentally changing.The brightness can be shown within the six brightness levels on the multi-inf ormation display. When you turn the knob, the lower segment of the display changes to vertical bars that show you the current level. You will hear a tone when you reach the maximum or minimum brightness. The brightness level goes out about 5 seconds af ter you stop adjusting. Instrument Panel Brightness Inst rument s and Cont rols148 BRIGHTNESS LEVELS 09/01/28 17:52:00 32SMG631_153
The rear window demister will clear fog, frost, and thin ice from the window. Turn the ignition switch to the ON (II) position. Push the demister button to turn it on and of f . The indicator in the button comes on to show the demister is on. It shuts of f when you turn of f the ignition switch. You have to turn the demister on again when you restart the vehicle. Pushtheredbuttontoturnonthe hazard warning lights (f our-way f lashers). This causes all outside turn signals and both turn indicators in the instrument panel to flash. Use these lights to give a warning to other road users that your vehicle is causing a hazard.Pushing the demister also turns the mirror heaters on and of f . For more inf ormation, see page . The demister and antenna wires on the inside of the rear window can be accidentally damaged. When cleaning the glass, always wipe side to side. Make sure the rear window is clear and you have good visibility bef ore starting to drive. The demister will shut itself of f withinabout20to40minutes according to the outside temperature. 180 Inst rument s and Cont rols Hazard Warning Button, Rear Window Demister Rear Window Demister Hazard Warning Button 149 09/01/28 17:52:08 32SMG631_154
The vertical angle of the headlights (low beam) can be adjusted according to the number of persons andtheloadingweightinthe luggage area. Push the knob to pop it out, then turn the knob to select an appropriate angle of the headlights. Af ter adjusting, push the knob back in to prevent your setting f rom accidentally changing.A driver or a driver and passenger in the f ront seat. Five persons in the f ront and rear seats. Five persons in the f ront and rear seats and luggage in the luggage area, within the limits of maximum permissible axle weight and maximum permissible vehicle weight. A driver and luggage in the luggage area, within the limits of maximum permissible axle weight and maximum permissible vehicle weight.Your vehicle is equipped with an automatic headlight adjusting system that senses changes in the vehicle posture due to riding and loading conditions of the passengers and their luggage and adjusts the vertical angle of the headlights (low beam) automatically. 0: 1: 2: 3: On vehicles with high voltage discharge tube bulbs Headlight A djuster Inst rument s and Cont rols150 09/01/28 17:52:17 32SMG631_155
Make any steering wheel adjustments before you start driving. Make sure you have securely locked the steering wheel in place by trying to move it up, down, in, and out. Move the steering wheel up or down, and in or out, so it points toward your chest, not toward your f ace. Make sure you can see the instrument panel gauges and indicators. Pull the lever under the steering column all the way up.Push the lever down to lock the steering wheel in position. 1. 2.3. 4. Steering Wheel A djustments Inst rument s and Cont rols151 Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash. Adjust the steering wheel only when the vehicle is stopped. LEVER 09/01/28 17:52:24 32SMG631_156
These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged. Protect the keys f rom direct sunlight, high temperature, and high humidity. Donotdropthekeysorsetheavy objects on them. Keep the keys away f rom liquids. If they get wet, dry them immediately with a sof t cloth. Two ignition keys come with your vehicle. You should keep one of them in a saf e place, away f rom the vehicle, as a spare. They f it all the locks on your vehicle.Youshouldhavereceivedakey number tag with your keys. You will need this key number if you ever have to get a lost key replaced. Use only Honda-approved key blanks. Your two ignition keys are also fitted with remote transmitters; see page f or an explanation of the operation.159 Keys and Locks Inst rument s and Cont rols Remote Transmitter 152 KEY NUMBER TAGIGNITION KEYS WITH REMOTE TRANSMITTER 09/01/28 17:52:33 32SMG631_157
If the system repeatedly does not recognize the coding of your key, contact your dealer. Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle inoperable. If you have lost your key and cannot start your engine, contact your dealer. (EU models) EC Directives This immobilizer system complies with the R & TTE (Radio equipment and Telecommunications Terminal Equipment and the mutual recognition of their conf ormity) Directives. The immobilizer system protects your vehicle f rom thef t. If an improperly coded key (or other device) is used, the engine’s f uel system is disabled. When you turn the ignition switch to the ON (II) position, the immobilizer system indicator should come on brief ly, then go of f . If the indicator starts to blink, it means the system does not recognize the coding of the key. Turn the ignition switch to the LOCK (0) position, remove the key, reinsert it, and turn the ignition switch to the ON (II) position again. The system may not recognize your key’s coding if another immobilizer key or other metal object (i.e. key f ob) is near the ignition switch when you insert the key. Inst rument s and Cont rols Immobilizer Syst em (South A f rican model) 153 09/01/28 17:52:42 32SMG631_158
µ µ µIf the f ront wheels are turned, the anti-thef t lock may make it dif f icult to turn the key. Firmly turn the steering wheel to the lef t or right as you turn the key. You can operate the audio system (on some types) and the cigarette lighter in this position. This is the normal key position when driving. Several of the indicators on the instrument panel come on as a test when you turn the ignition switch f rom the ACCESSORY (I) to the ON (II) position. On some types, the headlights come on automatically in this position. The ignition switch has three positions: LOCK (0), ACCESSORY (I), and ON (II). You can insert or remove the key only in this position. To turn the key, push it in slightly. If your vehicle has an automatic transmission, the shif t lever must also be in Park.The engine can be started with the key in this position by pressing the ENGINE START button (see page on petrol models with manual transmission and automatic transmission, page on petrol models with i-SHIFT, and page on diesel models). 390 392 393 Ignition Switch Inst rument s and Cont rols A CCESSORY (I) ON (II) LOCK (0) 154 09/01/28 17:52:50 32SMG631_159
CONT INUED You will hear a reminder beeper if you leave the key in the ignition switch in the LOCK (0) or the ACCESSORY (I) position and open the driver’s door. You will also see the symbol ‘‘ ,’’ or the symbol with an ‘‘IGNITION KEY’’ message on the multi-information display. Remove the key to turn off the beeper and the warning symbol. To lock the doors and the tailgate, push the top of the master door lock switch on the driver’s door, pull the locktabrearwardonthedriver’s door, or use the key on the outside lock on the driver’s door. Pushing the bottom of the master door lock switch or pushing f orward the lock tab on the driver’s door will unlock all doors and the tailgate. If your vehicle has an automatic transmission, the shif t lever must be in Park bef ore you can remove the key f rom the ignition switch. Inst rument s and Cont rols Ignit ion Swit ch, Door L ocks Power Door L ocks 155 Removing the key from the ignition switch while driving locks the steering. This can cause you to lose control of the vehicle. Remove the key from the ignition switch only when parked.MASTER DOOR LOCK SWITCH 09/01/28 17:52:58 32SMG631_160