Honda Civic 5 Owners Manual

							¶If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
To cause the trip meter A and the
average f uel economy f or trip A to
reset every time you ref uel your
vehicle, adjust it as follows. To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
When your selection is successf ully
completed, the display shows
‘‘SETUP °C’’ f or a f ew seconds,
then goes back to the ‘‘CHG
SETTING’’ display. Press the SEL/
RESET button, then press the INFO
button repeatedly to select another
customizing mode.While the multi-inf ormation display
is showing ‘‘TRIP A RESET WITH
REFUEL,’’ press the SEL/RESET
button. The display changes to the
setting display.
T rip A Reset Wit h Ref uel
Multi-Inf ormation Display
Inst rument s and Cont rols126
09/01/29 17:56:15 32SMG631_131 
						

							If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display will
return to the normal display.
You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
andoff.Enteryourselectionby
pressing the SEL/RESET button.When your selection is successf ully
completed, the display shows
‘‘SETUP ON’’ f or a f ew seconds,
then goes back to the ‘‘CHG
SETTING’’ display. Press the SEL/
RESET button, then press the INFO
button repeatedly to select another
customizing mode.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols127
09/01/28 17:49:08 32SMG631_132 
						

							While the multi-information display
is showing ‘‘ELAPSED TIME
RESET,’’ press the SEL/RESET
button. The display changes to the
setting display.TRIP A: The elapsed time is reset
when you reset trip meter A.
TRIP B: The elapsed time is reset
when you reset trip meter B.
You can select ‘‘IGN OFF,’’
‘‘TRIP A,’’ or ‘‘TRIP B’’. Each time
you press the INFO button, the
selected mode switches between
them. Enter your selection by
pressing the SEL/RESET button. To cause the elapsed time to reset
everytimeyouturntheignition
switch to the LOCK (0) position or
resettripmeterAorB,adjustitas
described as f ollows.IGN OFF: The elapsed time is reset
when you turn the ignition switch to
the LOCK (0) position.
Elapsed T ime Reset
Multi-Inf ormation Display
Inst rument s and Cont rols128
09/01/28 17:49:16 32SMG631_133 
						

							If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
You can select the measurement
standard in the trip computer as
described as f ollows. There are three
selectable modes; AUTO, KM and
MILES. To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
When your selection is successf ully
completed, the display shows the
appropriate setting; ‘‘SETUP IGN
OFF,’’ ‘‘SETUP TRIP A,’’ or ‘‘SETUP
TRIP B’’ f or a f ew seconds, then
goes back to the ‘‘CHG SETTING’’
display. Press the SEL/RESET
button, then press the INFO button
repeatedly to select another
customizing mode.
CONT INUED
On the right-hand drive type only Display Unit
Multi-Inf ormation Display
Inst rument s and Cont rols129
IGN OFF is selected.
09/01/28 17:49:23 32SMG631_134 
						

							You can select ‘‘AUTO,’’ ‘‘KM,’’ or
‘‘MILES’’. Each time you press the
INFO button, the selected mode
switches between them. Enter your
selection by pressing the SEL/
RESET button.
While the multi-information display
is showing ‘‘DISPLAY UNIT,’’ press
the SEL/RESET button. The display
changes to the setting display. AUTO: The displayed measurements
of the trip computer on the multi-
inf ormation display correspond with
the speedometer display setting. The
display switches between ‘‘km’’ and
‘‘miles.’’
KM: The displayed measurements of
the trip computer on the multi-
inf ormation display do not
correspond to the speedometer
display switching. Always display
with ‘‘km.’’
MILES: The displayed
measurements of the trip computer
on the multi-information display do
not correspond to the speedometer
display switching. Always display
with ‘‘miles.’’When your selection is successf ully
completed, the display shows the
appropriate setting; ‘‘SETUP AUTO,’’
‘‘SETUP KM,’’ or ‘‘SETUP MILES’’
f or a f ew seconds, then goes back to
the ‘‘CHG SETTING’’ display. Press
the SEL/RESET button, then press
the INFO button repeatedly to select
another customizing mode.
Multi-Inf ormation Display
Inst rument s and Cont rols130
AUTO is selected.
09/01/28 17:49:31 32SMG631_135 
						

							If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
You can select the REV indicator in
the instrument panel. While the
multi-inf ormation display is showing
‘‘REV. INDICATOR,’’ press the
SEL/RESET button. The display
changes to the setting display.You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
and of f . Enter your selection by
pressing the SEL/RESET button. To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
CONT INUED
REV Indicat or
Multi-Inf ormation Display
Inst rument s and Cont rols131
09/01/28 17:49:38 32SMG631_136 
						

							If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
You can display the ECO indicator in
the instrument panel. While the
multi-inf ormation display is showing
‘‘ECO. INDICATOR,’’ press the
SEL/RESET button. The display
changes to the setting display. To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
In the automatic driving mode, the
REV indicator goes out even if the
setting is on. When your selection is successf ully
completed, the display shows
‘‘SETUP ON’’ or ‘‘SETUP OFF’’ f or a
f ew seconds, then goes back to the
‘‘CHG SETTING’’ display. Press the
SEL/RESET button, then press the
INFO button repeatedly to select
another customizing mode.
On vehicles with i-SHIFTECO Indicat or
Multi-Inf ormation Display
Inst rument s and Cont rols132
ON is selected.
09/01/28 17:49:45 32SMG631_137 
						

							If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.
To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button. The display
goes back to the normal display.
You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
andoff.Enteryourselectionby
pressing the SEL/RESET button.When your selection is successf ully
completed, the display shows
‘‘SETUP ON’’ or ‘‘SETUP OFF’’ f or a
f ew seconds, then goes back to the
‘‘CHG SETTING’’ display. Press the
SEL/RESET button, then press the
INFO button repeatedly to select
another customizing mode.
Multi-Inf ormation Display
Inst rument s and Cont rols133
ON is selected.
09/01/28 17:49:52 32SMG631_138 
						

							Press and hold the INFO button to
enter the customizing mode, then
press and release the INFO button to
select ‘‘LANGUAGE.’’ While the
multi-inf ormation display is showing
‘‘LANGUAGE,’’ press the SEL/
RESET button. The display changes
to the setting display.You can select any of the f ollowing
languages: English, French, German,
Spanish, Italian, Portuguese. Press
and release the INFO button to
select the language, then press the
SEL/RESET button to enter the
selection.When the language selection is
successf ully completed, the display
changes to the screen shown above
f or a f ew seconds, then goes back to
the ‘‘LANGUAGE’’ display. Press the
INFO button repeatedly to select
another customizing mode. Selecting L anguage
Multi-Inf ormation Display
Inst rument s and Cont rols134
ENGLISH is selected.
09/01/28 17:49:59 32SMG631_139 
						

							If you f ail to set the language setting,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.
Repeat the setup.To exit the customizing mode, select
theexitmodeshownaboveby
pressing the INFO button repeatedly,
f ollowed by the SEL/RESET button.
The display goes back to the normal
display.If you want to set the customizable
vehicle control settings to the default
setting, press the INFO button on
the steering wheel repeatedly until
‘‘DEFAULT ALL’’ is displayed, then
press the SEL/RESET button.
CONT INUED
Def ault Settings
Multi-Inf ormation Display
Inst rument s and Cont rols135
09/01/28 17:50:06 32SMG631_140