Honda Civic 5 Owners Manual

							If you do not select any settings on
the display af ter you press the INFO
button and the setting menu is
displayed, the customizing mode
display will return to the normal
display af ter about 10 seconds.
If you try to start driving while
customizing the settings, you will see
‘‘MUST STOP AND PARK TO
CHANGE SETTINGS’’ on the
display and the customizing will be
cancelled.
Customizing is also cancelled, if you
turn the ignition switch out of the
ON (II) position. You can also select the specified
speed alarm while driving. If you set
the alarm to the specified vehicle
speed while driving, select ‘‘SPEED
ALARM,’’ and ref er to page .You can access dif f erent alarm
f unctions when the vehicle is
stopped or while driving. While
driving, you can select either of the
two speed alarm settings. When your
vehicle is stopped, you can customize
the setting speed to your pref erence. If you want to change any vehicle
control settings, select ‘‘CHG
SETTING,’’ and f ollow the
instructions on page .
If you want the settings as they were
when the vehicle lef t the f actory,
select ‘‘DEFAULT ALL,’’ as
described on page .
UsetheINFObutton( )onthe
steering wheel to see and scroll
through the settings, and the SEL/
RESET button to enter your
selections.135122120On some typesSpeed A larm
(For some types)
Multi-Inf ormation Display
Inst rument s and Cont rols116
09/01/29 17:56:06 32SMG631_121 
						

							To set the speed alarm while the vehicle
is stopped:
Press and hold the INFO button to
enter the customizing mode, then
press and release the INFO button
repeatedly to select ‘‘SPEED
ALARM.’’ While the multi-
inf ormation display is showing
‘‘SPEED ALARM,’’ press the SEL/
RESET button. The display changes
to the setting mode.Speed setting 1: You can set the
alarm on or off, and adjust the
setting speeds above or below
50 km/h (30 mph).
Speed setting 2: You can set the
alarm on or off, and adjust the
setting speeds above or below
80 km/h (50 mph).
Each time you press and release the
INFO button ( ), the selected
icon is changed f rom set 1, to 50
km/h (30 mph), and to set 2, to 80
km/h (50 mph). Then press the
INFO button again to exit. On the lef t-hand drive type, you can
set the speed alarm in km/h. On the
right-hand drive type, you can set the
speed alarm in km/h or mph
according to the selected
speedometer display. The two speed
selections and the on/of f setting
icons are displayed.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols117
Speed setting 1 off is selected.
09/01/28 17:47:58 32SMG631_122 
						

							´
µ Select either of the setting modes (1
or 2), then select on or of f by
pressing the SEL/RESET button
repeatedly.The displayed number is the current
speed setting. Select either the or
icon by pressing the INFO button
repeatedly, then press the SEL/
RESET button to change the setting
value. To adjust the setting speed, select
either of the setting speeds, then
press and release the SEL/RESET
button. The display changes to the
speed setting screen.
Multi-Inf ormation Display
Inst rument s and Cont rols118
Alarm on Alarm off
09/01/28 17:48:05 32SMG631_123 
						

							Once you have made your selection,
press and release the INFO button to
move to the exit mode. Press the
SEL/RESET button to enter your
setting. If you press the INFO button,
the display goes back to the setting
mode. Repeat the setup. Each time you press the SEL/
RESET button, the setting speed
increases or decreases by 5 km/h
(mph). You can set the speed values
over 5 km/h (5 mph) with 5 km/h
(mph) steps. Always f ollow the
posted speed limit and never drive
faster than is safe for the traffic
conditions.
To enter your selection, select the
SET icon by pressing the INFO
button, then press the SEL/RESET
button.
To exit the customizing mode, select
theexitmodeshownaboveby
pressing the INFO button repeatedly,
then press the SEL/RESET button.
The display goes back to the normal
display.
CONT INUED
Multi-Inf ormation Display
Inst rument s and Cont rols119
09/01/28 17:48:11 32SMG631_124 
						

							Af ter your selection, press and
releasetheINFObuttontomoveto
the exit mode. Press the SEL/
RESET button to enter your setting.
If you press the INFO button, the
display goes back to the setting
mode. Repeat the setup.
Press the INFO button f or about 1
second to switch the display. You will
see the speed alarm settings in the
multi-inf ormation display.Select the desired setting speed,
then press the SEL/RESET button.
Each time you press the SEL/
RESET button, the selected speed
icon switches between on and of f . According to the selected display,
you can select the alarm speed
between the two setting speeds:
50km/hand80km/hinkm/hmode,
or 30 mph and 50 mph in mph mode.
Each time you press and release the
INFO button, the selected icon ischanged between the setting speeds
and the exit icon.To select the alarm speed while driving:
Multi-Inf ormation Display
Inst rument s and Cont rols120
Alarm off Alarm on
09/01/28 17:48:18 32SMG631_125 
						

							Af ter pressing the SEL/RESET
button, the display shows your
setting f or a f ew seconds, then goes
back to the normal display.If you do not press any button, the
display returns to the normal display
af ter about 10 seconds.
Multi-Inf ormation Display
Inst rument s and Cont rols121
Alarm on
09/01/28 17:48:22 32SMG631_126 
						

							´µ
REV. INDICATOR: Rev indicator
canbeturnedonoroff (seepage
).
ECO. INDICATOR: ECO indicator
canbeturnedonoroff (seepage
). You can customize some of the
vehicle control settings to suit your
needs. The f ollowing items are the
settings you can customize.
WARNING MESSAGE: The
warning message is displayed with
the symbol or not (see page ).
ADJUST OUTSIDE TEMP.
DISPLAY: The outside
temperature indicator value is
adjustable up to or 3°C (see
page ).
TRIP A RESET WITH REFUEL:
Average f uel economy f or trip
meter A can be reset af ter
ref ueling (see page ).
ELAPSED TIME RESET: The
elapsed time can be reset when
you turn the ignition switch to the
LOCK (0) position or when you
reset trip meter A or B (see page
).DISPLAY UNIT: Measurements in
the trip computer can be selected;
auto, km or miles (see page ).
This f unction is available on the
right-hand drive type only. 123
125
126
129 131
132
128 Change Setting
Multi-Inf ormation Display
Inst rument s and Cont rols122
Right-hand drive type is shown.: Press the INFO button.
: Press the SEL/RESET
button.
09/01/28 17:48:32 32SMG631_127 
						

							Press and hold the INFO button to
enter the customizing mode, then
press and release the INFO button
repeatedly to select ‘‘CHG SETTING.’’
While the multi-information display
is showing ‘‘CHG SETTING,’’ press
the SEL/RESET button. The display
changes to the setting mode.
Press and release the INFO button
repeatedly until you see the setup
you want to customize, and press the
SEL/RESET button to enter your
selection. Each time you press the
INFO button, the display changes as
shown. To customize each setting,
f ollow the procedures described on
the f ollowing pages.To exit the customizing mode af ter
your selection, select the exit mode
shown above by pressing the INFO
button repeatedly, then press the
SEL/RESET button. The display will
return to the normal display.You can see message(s) with the
system warning symbol on the multi-
inf ormation display. While the multi-
inf ormation display is showing
‘‘WARNING MESSAGE,’’ press the
SEL/RESET button. The display
changes to the setting display.
CONT INUED
Warning Message
Multi-Inf ormation Display
Inst rument s and Cont rols123
09/01/28 17:48:39 32SMG631_128 
						

							You can select ‘‘ON’’ or ‘‘OFF’’. Each
time you press the INFO button, the
selected mode switches between on
andoff.Enteryourselectionby
pressing the SEL/RESET button.When your selection is successf ully
completed, the display shows
‘‘SETUP ON’’ f or a f ew seconds,
then goes back to the ‘‘CHG
SETTING’’ display. Press the SEL/
RESET button, then press the INFO
button repeatedly to select another
customizing mode.To exit the customizing mode, select
theexitmodebypressingtheINFO
button repeatedly, then press the
SEL/RESET button (see page ).
The display goes back to the
‘‘WARNING MESSAGE’’ display.
If you f ail to enter your selection,
you will see ‘‘INCOMPLETE’’ on the
display f or a f ew seconds. The
display returns to the setting mode.Repeat the setup.
To return to the normal display,
select the display, then press
the SEL/RESET button.123
Multi-Inf ormation Display
Inst rument s and Cont rols124
09/01/28 17:48:47 32SMG631_129 
						

							´µ
´´´
µµµ If you f ind that the temperature
reading is always a f ew degrees
below or above the actual
temperature, adjust it as described in
the f ollowing section.
While the multi-information display
is showing ‘‘ADJUST OUTSIDE
TEMP. DISPLAY,’’ press the SEL/
RESET button. The display changes
to the setting display.The highlighted number is the
current adjustment above or below
the outside temperature. Select
either or icon by pressing the
INFO button repeatedly then press
the SEL/RESET button to change
the setting value. You can select the
value between 0, 1, 2, 3, and 0,
1, 2, 3. To enter your selection,
select the SET icon by pressing the
INFO button, then press the SEL/
RESET button.
CONT INUED
Out side T emperat ure Display
A djust ment
Multi-Inf ormation Display
Inst rument s and Cont rols125
09/01/28 17:48:54 32SMG631_130