Epson Xp 202 Manual

							3. Access the print dialog.
4. Make the following settings.
❏Printer: Select your printer.
❏Paper Size: Select the paper size you set in the application.
❏Orientation: Select the orientation you set in the application.
5. Select Paper Feed from the pop-up menu, and then select the paper source in which you loaded the paper.
User's Guide
Printing
81 
						

							6. Select Printer Features from the pop-up menu, select Quality as the Feature Sets setting, and then select the
type of paper you loaded as the MediaType setting.
7.
Select Color as the Feature Sets setting, and then select the setting for Color Mode.
8. Click Print. User's Guide
Printing
82 
						

							Setting Items for the PostScript Printer Driver
Note:
The availability of these settings varies by model.
Color Mode Select whether to print in color or in monochrome.
Press Simulation You can select a CMYK ink color to simulate when you print by reproducing the CMYK ink
color of the 
offset press.
Simulation Method Select the method of color conversion for the CMYK simulation.
Pure Black Mode Select whether or not to print black text data or line drawing data using only black ink.
However, other color inks may be consumed depending on the paper, even when this
feature is set.
Ink Save Mode Conserves ink by reducing the print density.
Rotate by 180º Rotates the data 180 degrees before printing.
Printing from Smart Devices
Using Epson iPrint
Epson iPrint is an application that allows you to print photos, documents, and Web pages from a smart device such
as a smartphone or tablet. You can use either local print, printing from a smart device that is connected to the same
wireless network as your printer, or remote print, printing externally over the internet. To use remote print, register
your printer in the Epson Connect service.
You can install Epson iPrint on your smart device from the following URL or QR code.
http://ipr.to/c
Using Epson iPrint
Start Epson iPrint from your smart device and select the item you want to use from the home screen. User's Guide
Printing
83 
						

							The following screens are subject to change without notice.
AHome screen displayed when the application is started.
BDisplays information on how to setup the printer and a FAQ.
CDisplays the screen where you can select the printer and make printer settings. Once you have selected the
printer, you do not need to select it again from the next time.
DSelect what you want to print such as photos, documents, and web pages.
EDisplays the screen to make print settings such as paper size and paper type.
FDisplays photos and documents you selected.
GStarts printing.
Note:
To print from the document menu using iPhone, iPad, and iPod touch running iOS, start Epson iPrint after transferring the
document you want to print using the 
file sharing function in iTunes.
Related Information
&“Epson Connect Service” on page 149 User's Guide
Printing
84 
						

							Using AirPrint
AirPrint allows you to wirelessly print to your AirPrint-enabled printer from your iOS device using the latest
version of iOS and from your Mac OS X v10.7.x or later.
Note:
See the AirPrint page of the Apple website for more details.
1. Load paper in the printer.
2. Connect your device to the same wireless network that your printer is using.
3.
Print from your device to your printer.
Related Information
&“Loading Paper in the Paper Cassette” on page 46
&“Loading Paper in the Rear Paper Feed” on page 48
&“Loading Paper in the Front Paper Feed Slot” on page 50
Canceling Printing
Note:
❏In Windows, you cannot cancel a print job from the computer once it has been completely sent to the printer. In this case,
cancel the print job by using the printer's control panel.
❏When printing several pages from Mac OS X, you cannot cancel all of the jobs by using the control panel. In this case,
cancel the print job from the computer.
❏If you have sent a print job from Mac OS X v10.6.x or v10.5.8 through the network, you may not be able to cancel
printing from the computer. In this case, cancel the print job by using the printer's control panel. You need to change
settings in Web Config to cancel printing from the computer. See the Network Guide for more details.
Canceling Printing - Printer Button
Press the y button to cancel the print job in progress.
Canceling Printing - Status Menu
1. Press the  button to display Status Menu. User's Guide
Printing
85 
						

							2. Select Job Monitor > Print Job.
Ongoing jobs and jobs that are standing by are shown in the list.
3. Select the job that you want to cancel.
4. Press Cancel.
Canceling Printing - Windows
1.
Access the printer driver window.
2. Select the Maintenance tab.
3. Click Print Queue.
4. Right-click on the job you want to cancel and then select Cancel.
Related Information
&“Windows Printer Driver” on page 151
Canceling Printing - Mac OS X
1. Click the printer icon in the Dock.
2. Select the job you want to cancel.
3.
Cancel the job.
❏Mac OS X v10.8.x to Mac OS X v10.9.x
Click 
 next to the progress meter.
❏Mac OS X v10.5.8 to v10.7.x
Click Delete. User's Guide
Printing
86 
						

							Copying
1. Load paper in the printer.
2. Place the originals.
3. Enter Copy from the home screen.
4. Enter the number of copies by using the numeric keypad.
5. Press Layout, and then select the appropriate layout.
6. Make other settings as necessary. You can make detailed settings by pressing Settings.
Note:
❏Press Preset to save your settings as a preset.
❏Press Preview to preview the copy results. However, you cannot preview when you have placed the originals on the
ADF.
7.
Press the x button.
Related Information
&“Loading Paper in the Paper Cassette” on page 46
&“Loading Paper in the Rear Paper Feed” on page 48
&“Loading Paper in the Front Paper Feed Slot” on page 50
&“Placing Originals” on page 54
&“Copy Mode” on page 24
&
“Presets Mode” on page 41 User's Guide
Copying
87 
						

							Scanning
Scanning Using the Control Panel
Scanning to an Email
You can send scanned image files by email directly from the printer through a pre-configured email server. Before
using this feature, you need to configure the email server.
You can specify the email address by entering directly, but it may be easier if you register the email address in the
contacts list first.
Note:
❏Before you use this feature, make sure the printer's Date/Time and Ti m e  
Difference settings are correct. Access the menus
from System Administration > Common Settings.
❏By using the Document Capture Pro function on the control panel instead of this function, you can send emails directly.
Before using this function, make sure you have registered a job to send emails in Document Capture Pro and that the
computer is turned on.
1. Place the originals.
2. Enter Scan from the home screen.
3. Select Email.
4. Enter the email addresses.
❏To select from the contacts list: Press Contacts, press the check box to add a check mark to a contact, and
then press Proceed.
❏To enter the email address manually: Select Enter Email Address > Enter Email Address, enter the email
address, and then press the enter key at the bottom-right of the screen.
Note:
You can send emails to up to 10 individual email addresses and groups.
5.
Press Format, and then select the file format.
6. Press Menu, and then make settings for Email Settings and Basic Settings.
Note:
❏You can specify the maximum size for 
files that can be attached to an email in Attached File Max Size.
❏When you select PDF as the file format, you can set a password to protect the file. Select PDF Settings, and then
make settings.
❏Press Preset to save your settings as a preset.
7. Press the x button.
The scanned image is sent by email.
Related Information
&
“System Administration” on page 32 User's Guide
Scanning
88 
						

							&“Configuring an Email Server” on page 229
&“Managing Contacts” on page 58
&“Placing Originals” on page 54
&“Scan Mode” on page 26
&“Presets Mode” on page 41
&“Scanning Using Document Capture Pro (for Windows Only)” on page 90
Scanning to a Network Folder or FTP Server
You can save the scanned image to a specified folder on a network. You can specify the folder by entering a folder
path directly, but it may be easier if you register the folder information in the contacts list 
first.
Note:
Before you use this feature, make sure the printer's Date/Time and Ti m e  D i ff e r e n c e settings are correct. Access the menus
from System Administration > Common Settings.
1. Place the originals.
2. Enter Scan from the home screen.
3. Select Network Folder/FTP.
4. Specify the folder.
❏To select from the contacts list: Press Contacts, select a contact, and then press Proceed.
❏To enter the folder path directly: Press Enter Location. Select Communication Mode, enter the folder path
as Location, and then make other folder settings.
Note:
Enter the folder path in the following format.
When using SMB as the communication mode:
\\host name\folder name
When using FTP as the communication mode:
ftp://host name/folder name
5. Press Format, and then select the file format.
6. Press Menu, and then make settings for File Settings and Basic Settings.
Note:
❏When you select PDF as the file format, you can set a password to protect the file. Select PDF Settings, and then
make settings.
❏Press Preset to save your settings as a preset.
7. Press the x button.
The scanned image is saved.
Related Information
&“System Administration” on page 32
&“Managing Contacts” on page 58 User's Guide
Scanning
89 
						

							&“Placing Originals” on page 54
&“Scan Mode” on page 26
&“Presets Mode” on page 41
Scanning to a Memory Device
You can save the scanned image to a memory device.
1. Insert a memory device into the printer's external interface USB port.
2.
Place the originals.
3. Enter Scan from the home screen.
4. Select Memory Device.
5.
Press Format, and then select the file save format.
6. Press Settings, and then make scan settings.
Note:
❏When you select PDF as the 
file format, you can set a password to protect the 
file. Select PDF Settings, and then
make settings.
❏Press Preset to save your settings as a preset.
7. Press the x button.
The scanned image is saved.
Related Information
&“Part Names and Functions” on page 18
&“Placing Originals” on page 54
&“Scan Mode” on page 26
&“Presets Mode” on page 41
Scanning to the Cloud
You can send scanned images to cloud services using Epson Connect.
See the Epson Connect portal website for details.
https://www.epsonconnect.com/
http://www.epsonconnect.eu (Europe only)
Scanning Using Document Capture Pro (for Windows Only)
You can scan the original using the settings specified in Document Capture Pro.
Note:
❏Before scanning, install Document Capture Pro and make settings for the job.
❏Before scanning, connect the printer and the computer to the network.
User's Guide
Scanning
90