Epson Xp 202 Manual

							4. Turn the printer around, and open rear cover 1.
5. Pull out rear cover 2.
6. Remove the cover inside the back of the printer.
User's Guide
Replacing Ink Supply Units and Other Consumables
131 
						

							7. Slide out the two used maintenance rollers, and remove them.
8. Insert two new maintenance rollers until they click into place.
Note:
Insert the maintenance rollers by rolling them so that you can insert them smoothly.
9. Reattach the cover inside the back of the printer.
10. Hold up the maintenance roller for the paper cassette by rolling it up, and then remove it.
User's Guide
Replacing Ink Supply Units and Other Consumables
132 
						

							11. Install the new maintenance roller in the paper cassette.
12.
Hold down the maintenance roller firmly.
13.
Insert rear cover 2, close rear cover 1, and then insert the paper cassette.
14. Turn on the printer, select Setup>Maintenance>Maintenance Roller Information>Reset Maintenance
Roller Counter, and then select the paper cassette in which you replaced the maintenance rollers.
Related Information
&“Maintenance Rollers Codes” on page 130
Replacing Maintenance Rollers in Paper Cassette 2 to
4
There are two places for replacing the maintenance rollers: on the back of the printer (two rollers) and on the paper
cassette (one roller). User's Guide
Replacing Ink Supply Units and Other Consumables
133 
						

							1. Remove the new maintenance rollers from their package.
cImportant:
❏
The maintenance rollers for the paper cassette 1 and paper cassette 2 to 4 are 
different. Check the direction
of arrow on the center of the maintenance rollers, and make sure the maintenance rollers are the ones for
paper cassette 2 to 4. If you attach the wrong rollers, the printer may not feed the paper.
❏Be careful not to stain the surface of the maintenance rollers. If the dust collects on the surface of the
maintenance rollers, clean the rollers by using a soft and dry cloth.
2.
Turn off the printer by pressing the P button, and then unplug the power cord.
3. Pull out the paper cassette for which you want to replace the rollers.
User's Guide
Replacing Ink Supply Units and Other Consumables
134 
						

							4. Turn the printer around, and then open the printer's rear cover.
5. Remove the screws by a screwdriver and remove the cover on the rear of inside the printer.
User's Guide
Replacing Ink Supply Units and Other Consumables
135 
						

							6. Slide out two used maintenance rollers, and remove both of them.
7. Insert two new maintenance rollers until they click into place.
Note:
Insert the maintenance rollers by rolling them so that you can insert them smoothly.
8. Hold up the maintenance roller for the paper cassette by rolling it up, and then remove it.
User's Guide
Replacing Ink Supply Units and Other Consumables
136 
						

							9. Install the new maintenance roller in the paper cassette.
10.
Hold down the maintenance roller firmly.
11.
Fasten the screws to attach the cover back on, and close the rear cover.
12. Insert the paper cassette.
13. Turn on the printer, select Setup > Maintenance > Maintenance Roller Information > Reset Maintenance
Roller Counter, and then select the paper cassette in which you replaced the maintenance rollers.
Related Information
&“Maintenance Rollers Codes” on page 130
Temporarily Printing with Black Ink
When color ink is expended and black ink still remains, you can use the following settings to continue printing for
a short time using only black ink.
❏Type of paper: plain papers, Envelope
❏Color: Grayscale
❏EPSON Status Monitor 3: Enabled (for Windows only)
Because this feature is only available for approximately five days, replace the expended ink supply unit as soon as
possible. User's Guide
Replacing Ink Supply Units and Other Consumables
137 
						

							Note:
❏If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏The available period varies depending on the usage conditions.
Temporarily Printing with Black Ink - Windows
1. When the following window is displayed, cancel printing.
Note:
If you cannot cancel printing from the computer, cancel using the printer's control panel.
2. Access the printer driver window.
3.
Select plain papers or Envelope as the Paper Type setting on the Main tab.
4. Select Grayscale.
5. Set the other items on the Main and More Options tabs as necessary, and then click OK. User's Guide
Replacing Ink Supply Units and Other Consumables
138 
						

							6. Click Print.
7. Click Print in Black in the window displayed.
Related Information
&“Loading Paper in the Paper Cassette” on page 46
&“Loading Paper in the Rear Paper Feed” on page 48
&“Loading Paper in the Front Paper Feed Slot” on page 50
&“Printing Basics - Windows” on page 61
Temporarily Printing with Black Ink - Mac OS X
Note:
To use this feature through a network, connect with Bonjour.
1. Click the printer icon in the Dock.
2. Cancel the job.
❏Mac OS X v10.8.x to Mac OS X v10.9.x
Click 
 next to the progress meter.
❏Mac OS X v10.5.8 to v10.7.x
Click Delete.
Note:
If you cannot cancel printing from the computer, cancel using the printer's control panel.
3. Select System Preferences from the  menu > Printers & Scanners (or Print & Scan, Print & Fax), and
then select the printer. Click Options & Supplies > Options (or Driver).
4. Select On as the Permit temp orar y black printing setting.
5.
Access the printer driver window.
6. Select Print Settings from the pop-up menu.
7. Select plain papers or Envelope as the Media Type setting.
8. Select Grayscale.
9. Set the other items as necessary.
10. Click Print.
Related Information
&“Loading Paper in the Paper Cassette” on page 46
&“Loading Paper in the Rear Paper Feed” on page 48
&“Loading Paper in the Front Paper Feed Slot” on page 50
&“Printing Basics - Mac OS X” on page 63 User's Guide
Replacing Ink Supply Units and Other Consumables
139 
						

							Conserving Black Ink when the Black Ink Is Low (for
Windows Only)
When black ink is running low and there is enough color ink remaining, you can use a mixture of color inks to
create black. You can continue printing while preparing a replacement black ink supply unit.
This feature is only available when you select the following settings in the printer driver.
❏Paper Type: plain papers
❏Quality: Standard
❏EPSON Status Monitor 3: Enabled
Note:
❏If EPSON Status Monitor 3 is disabled, access the printer driver, click Extended Settings on the Maintenance tab, and
then select Enable EPSON Status Monitor 3.
❏Composite black looks slightly different from pure black. In addition, the print speed is reduced.
❏To maintain the quality of the print head, black ink is also consumed.
OptionsDescription
Yes Select to use a mixture of color inks to create black. This window is displayed the next time
you print a similar job.
No Select to continue using the remaining black ink. This window is displayed the next time
you print a similar job.
Disable this feature Select to continue using the remaining black ink. This window is not displayed until you
replace the black ink supply unit and it runs low again.
User's Guide
Replacing Ink Supply Units and Other Consumables
140