Epson Xp 202 Manual

							5. Click Settings, make the appropriate settings, and then click OK.
6. Set the other items on the Main and More Options tabs as necessary, and then click OK.
7.
Click Print.
Related Information
&“Loading Paper in the Paper Cassette” on page 46
&“Loading Paper in the Rear Paper Feed” on page 48
&“Loading Paper in the Front Paper Feed Slot” on page 50
&“Printing Basics - Windows” on page 61
Making Posters Using Overlapping Alignment Marks
Here is an example of how to make a poster when 2x2 Poster is selected, and Overlapping Alignment Marks is
selected in Print Cutting Guides.
User's Guide
Printing
71 
						

							1. Prepare Sheet 1 and Sheet 2. Cut off the margins of Sheet 1 along the vertical blue line through the center of
the top and bottom cross marks.
2. Place the edge of Sheet 1 on top of Sheet 2 and align the cross marks, then temporarily tape the two sheets
together from the back.
User's Guide
Printing
72 
						

							3. Cut the taped sheets in two along the vertical red line through the alignment markers (this time, the line to the
left of the cross marks).
4. Tape the sheets together from the back.
5. Repeat steps 1 to 4 to tape Sheet 3 and Sheet 4 together. User's Guide
Printing
73 
						

							6. Cut off the margins of Sheet 1 and Sheet 2 along the horizontal blue line through the center of the left and right
side cross marks.
7. Place the edge of Sheet 1 and Sheet 2 on top of Sheet 3 and Sheet 4 and align the cross marks, and then
temporarily tape them together from the back.
User's Guide
Printing
74 
						

							8. Cut the taped sheets in two along the horizontal red line through the alignment markers (this time, the line
above the cross marks).
9. Tape the sheets together from the back.
User's Guide
Printing
75 
						

							10. Cut off the remaining margins along the outer guide.
Printing Using Advanced Features
This section introduces a variety of additional layout and printing features available on the printer driver.
Related Information
&“Windows Printer Driver” on page 151
&“Mac OS X Printer Driver” on page 152
Adding a Printing Preset
If you create your own preset of frequently used print settings on the printer driver, you can print easily by
selecting the preset from the list. User's Guide
Printing
76 
						

							Windows
To add your own preset, set items such as the Document Size and Paper Type on the Main or More Options tab,
and then click Add/Remove Presets in Printing Presets.
Mac OS X
Access the print dialog. To add your own preset, set items such as the Paper Size and Media Type, and then save
the current settings as the preset in the Presets setting.
Printing a Reduced or Enlarged Document
You can reduce or enlarge the size of a document by a specific percentage.
Windows
Set the Document Size on the More Options tab. Select Reduce/Enlarge Document, Zoom to, and then enter a
percentage.
Mac OS X
Select Page Setup from the File menu. Select the settings for Format For and Paper Size, and then enter a
percentage in Scale. Close the window, and then print following the basic printing instructions.
Related Information
&“Printing Basics - Mac OS X” on page 63
Adjusting the Print Color
You can adjust the colors used in the print job.
PhotoEnhance produces sharper images and more vivid colors by automatically adjusting the contrast, saturation,
and brightness of the original image data.
Note:
❏These adjustments are not applied to the original data.
❏PhotoEnhance adjusts the color by analyzing the location of the subject. 
Therefore, if you have changed the location of
the subject by reducing, enlarging, cropping, or rotating the image, the color may change unexpectedly. If the image is out
of focus, the tone may be unnatural. If the color is changed or becomes unnatural, print in a mode other than
PhotoEnhance.
Windows
Select Custom as the Color Correction setting on the More Options tab. Click Advanced, select the Color
Management setting, and then make appropriate settings.
Mac OS X
Access the print dialog. Select Color Matching from the pop-up menu, and then select EPSON Color Controls.
Select Color Options from the pop-up menu, and then select one of the available options. Click the arrow next to
Advanced Settings and make the appropriate settings. User's Guide
Printing
77 
						

							Printing an Anti-Copy Pattern (for Windows Only)
You can print documents with invisible letters such as "Copy". These letters appear when the document is
photocopied so that the copies can be distinguished from the original. You can also add your own anti-copy
pattern.
Note:
This feature is only available when the following settings are selected.
❏Paper Type: plain papers
❏Quality: Standard
❏Auto 2-sided printing: Disabled
❏Color Correction: Automatic
❏Short Grain Paper: Disabled
Click Watermark Features on the More Options tab, and then select an anti-copy pattern. Click Settings to
change details such as the size and density.
Printing a Watermark (for Windows Only)
You can print a watermark such as "Confidential" on your printouts. You can also add your own watermark.
Click Watermark Features on the More Options tab, and then select a watermark. Click Settings to change details
such as the color and position of the watermark.
Printing a Header and Footer (for Windows Only)
You can print information such as a user name and printing date as headers or footers.
Click Watermark Features in the More Options tab, and then select Header/Footer. Click Settings and select
necessary items from the drop-down list.
Setting a Password for a Print Job (for Windows Only)
You can set a password for a print job to prevent printing until the password is entered on the printer's control
panel.
Select Confidential Job on the More Options tab, and then enter a password.
To print the job, press the 
 button on the printer's control panel, and then select Confidential Job. Select the job
and enter the password.
Printing Using a PostScript Printer Driver
Printing Using a PostScript Printer Driver - Windows
1. Load paper in the printer.
2. Open the file you want to print.
3. Access the PostScript printer driver window. User's Guide
Printing
78 
						

							4. Select the orientation you set in the application as the Orientation on the Layout tab.
5. Make the following settings on the Paper/Quality tab.
❏Paper Source: Select the paper source in which you loaded the paper.
❏Media: Select the type of paper you loaded. User's Guide
Printing
79 
						

							6. Click Advanced, make the following settings, and then click OK.
❏Paper Size: Select the paper size you set in the application.
❏Color Mode: Select to print in full color or monochrome.
7. Click OK.
8. Click Print.
Printing Using a PostScript Printer Driver - Mac OS X
1. Load paper in the printer.
2. Open the file you want to print. User's Guide
Printing
80