Cisco 6509 E Installation Manual
Have a look at the manual Cisco 6509 E Installation Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 53 Cisco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
2-11 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10 and 10/100 Fiber-Based Ethernet Modules Queues per portTx—1p3q1t Rx—1p1q0t Chassis/slot restrictions No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis. Bus connection Single connection into the 32-Gbps shared bus Module upgrades available PoE support Not available Distributed forwarding supportField upgradeable to support distributed forwarding with the following daughter cards: WS-F6K-DFC WS-F6K-DFC3A WS-F6K-DFC3B WS-F6K-DFC3BXL See Appendix A for further information on the DFC daughter cards. See the Catalyst 6500 Series DFC, DFC3A, DFC3B, and DFC3BXL Installation Note for field installation procedures. Pluggable transceivers supportNot supported Digital Optical Monitoring (DOM) supportNot supported Module front panel LEDsSTATUS Green—All diagnostics pass; the module is operational. Orange—The module is booting or running diagnostics; an overtemperature condition has occurred. LINK Green—The port is active (the link is connected and operational). Flashing orange—The port failed diagnostics and is disabled. Orange—The port is disabled. Red—The module is resetting; an overtemperature condition has occurred. NoteIf the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. Off—The port is not active or the link is not connected. Table 2-7 WS-X6524-100FX-MM Features (continued) Feature Description
2-12 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10 and 10/100 Fiber-Based Ethernet Modules Table 2-8 WS-X6524-100FX-MM Physical and Environmental Specifications Item Specification Dimensions 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis. Weight Base module—7.0 lb (3.18 kg) Power and heat numbers Base module –Module current—1.90 A –Module power—79.8 W –AC-input power—99.75 W –AC heat dissipation—340.65 BTU/hour –DC-input power—107.30 W –DC heat dissipation—366.30 BTU/hour Base module + DFC3 daughter card –Module current—4.00 A –Module power—168.00 W –AC-input power—210.00 W –AC heat dissipation—717.15 BTU/hour –DC-input power—225.81 W –DC heat dissipation—771.13 BTU/hour Base module + DFC3A daughter card –Module current—4.47 A –Module power—187.74 W –AC-input power—234.68 W –AC heat dissipation—801.42 BTU/hour –DC-input power—252.34 W –DC heat dissipation—861.74 BTU/hour
2-13 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules 10/100 and 10/100/1000 Ethernet Modules This section describes the following 10/100 and 10/100/1000BASE Ethernet modules: WS-X6148-GE-TX and WS-X6148A-GE-TX Ethernet Modules, page 2-14 WS-X6148-RJ21 Ethernet Modules, page 2-19 WS-X6148-RJ-45 and WS-X6148A-RJ-45 Ethernet Modules, page 2-23 WS-X6148E-GE-45AT Ethernet Module, page 2-29 WS-X6148X2-RJ-45 and WS-X6148X2-45AF Ethernet Modules, page 2-32 WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules, page 2-37 WS-X6348-RJ21V Ethernet Module, page 2-41 WS-X6348-RJ45 and WS-X6348-RJ45V Ethernet Modules, page 2-43 Power and heat numbers (continued) Base module + DFC3B daughter card –Module current—3.57 A –Module power—149.94 W –AC-input power—187.43 W –AC heat dissipation—640.06 BTU/hour –DC-input power—201.53 W –DC heat dissipation—688.23 BTU/hour Base module + DFC3BXL daughter card –Module current—3.37 A –Module power—141.54 W –AC-input power—176.93 W –AC heat dissipation—604.20 BTU/hour –DC-input power—190.24 W –DC heat dissipation—649.68 BTU/hour Environment Operating temperature Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C) Humidity (RH) ambient (noncondensing)10 to 90% Operating altitude Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m) Table 2-8 WS-X6524-100FX-MM Physical and Environmental Specifications (continued) Item Specification
2-14 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules WS-X6516-GE-TX Ethernet Module, page 2-47 WS-X6548-GE-TX, WS-X6548-GE-45AF, and WS-X6548V-GE-TX Ethernet Modules, page 2-50 WS-X6548-RJ-21 Ethernet Module, page 2-54 WS-X6548-RJ-45 Ethernet Module, page 2-57 WS-X6748-GE-TX and WS-X6848-TX-2T/-2TXL Ethernet Modules, page 2-61 NoteAll 10/100 and 10/100/1000 Ethernet modules are hot-swappable. WS-X6148-GE-TX and WS-X6148A-GE-TX Ethernet Modules The base WS-X6148-GE-TX and the base WS-X6148A-GE-TX Ethernet modules and their variants (See Ta b l e 2 - 9) provide 48 10/100/1000-Mbps full- or half-duplex ports. (See Ta b l e 2 - 9.). Figure 2-5 shows the module front panel. Figure 2-5 WS-X6148-GE-TX Ethernet Module Front Panel NoteThe WS-X6148-GE-TX and the WS-X6148A-GE-TX Ethernet modules share the same front panel. The product numbers located in the upper-left corner will differ. Table 2-10 lists the features and descriptions for the base modules and their variants, and Table 2-11 lists the physical and environmental specifications for the base modules and their variants. Table 2-9 WS-X6148-GE-TX and WS-X6148A-GE-TX Ethernet Module Variants Module Description WS-X6148-GE-TX Base module without daughter cards installed. WS-X6148-GE-45AF Base module equipped with a factory-installed IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF). WS-X6148V-GE-TX Base module equipped with a factory-installed Cisco prestandard PoE daughter card (WS-F6K-VPWR-GE). WS-X6148A-GE-TX Base module (with enhanced port buffer size) without daughter cards installed. WS-X6148A-GE-45AF Base module (with enhanced port buffer size) equipped with a factory-installed IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF).
2-15 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Table 2-10 WS-X6148-GE-TX and WS-X6148A-GE-TX Features Feature Description Ports per module 48 ports (all variants). Ports are numbered (left to right) –Top row, odd numbered ports 1–47. –Bottom row, even numbered ports 2–48. Port groups –WS-X6148-GE-TX—2 –WS-X6148A-GE-TX—6 Port ranges per port group –WS-X6148-GE-TX: 1–24, 25–48 –WS-X6148A-GE-TX: 1–8, 9–16, 17–24, 25–32, 33–40, 41–48 Port connector type RJ-45 (all variants) Cabling distance 328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable (all variants) Buffer size WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF—1.4 MB per 8 ports WS-X6148A-GE-TX and WS-X6148A-GE-45AF—5.5 MB per port QoS Number of egress queues: 3 Number of ingress queues: 1 Number of thresholds per egress queue: 2 Number of thresholds per ingress queue: 2 Maximum frame size WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF—Up to 1518 bytes per frame WS-X6148A-GE-TX and WS-X6148A-GE-45AF—Up to 9216 bytes per frame Module oversubscription rate 8:1 Supervisor engine support Supported by the following supervisor engines: Supervisor Engine 2 Supervisor Engine 32 Supervisor Engine 32 PISA Supervisor Engine 720 Supervisor Engine 720-10GE Supervisor Engine 2T (only supported with the WS-X6148A-GE-TX and the WS-X6148A-GE-45AF Ethernet modules)
2-16 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Software supportWith Supervisor Engine 2—12.2(18)SXF2 With Supervisor Engine 32—12.2(18)SXF With Supervisor Engine 32 PISA—12.2(18)ZY With Supervisor Engine 720—12.2(18)SXF With Supervisor Engine 720 and WS-F6K-GE48-AF or WS-F6K48-AF PoE daughter cards—12.2(17d)SXB (WS-X6148-GE-TX only) With Supervisor Engine 720-10GE—12.2(33)SXH With Supervisor Engine 2T—12.2(50)SY Catalyst OS –WS-X6148-GE-TX—7.6(9) –WS-X6148A-GE-TX—8.4(1) Queues per port WS-X6148-GE-TX, WS-X6148V-GE-TX, and WS-X6148-GE-45AF Tx—1p2q2t (per 8 ports) Rx—1p2t (per port) WS-X6148A-GE-TX and WS-X6148A-GE-45AF Tx—1p3q8t Rx—1q2t Chassis/slot restrictions No chassis or slot restrictions; the module can occupy any slot in any Catalyst 6500 or Catalyst 6500-E chassis (all variants) Bus connection Single connection into the 32-Gbps shared bus (all variants). Module upgrades available PoE support WS-X6148-GE-TX and WS-X6148A-GE-TX: The WS-X6148-GE-TX is field upgradeable with the WS-F6K-VPWR-GE= daughter card that supports only the Cisco prestandard. Both the WS-X6148-GE-TX and the WS-X6148A-GE-TX are field upgradeable with the WS-F6K-GE48-AF= daughter card that supports both the Cisco prestandard and the IEEE 802.3af standard. Refer to the Catalyst 6500 Series Power over Ethernet Daughter Cards Field-Upgrade Installation Note for field upgrade procedures. Refer to Appendix A for additional information on the PoE daughter cards. Distributed forwarding supportNot supported. Pluggable transceivers supportNot supported. TDR support All variants are supported. Table 2-10 WS-X6148-GE-TX and WS-X6148A-GE-TX Features (continued) Feature Description
2-17 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Module front panel LEDsSTATUS Green—All diagnostics pass; the module is operational. Orange—The module is booting or running diagnostics; an overtemperature condition has occurred. LINK Green—The port is active (the link is connected and operational). Flashing orange—The port failed diagnostics and is disabled. Orange—The port is disabled. Red—The module is resetting; an overtemperature condition has occurred. NoteIf the module fails to download code and configuration information successfully during the initial reset, the LED stays red; the module does not come online. Off—The port is not active or the link is not connected. PHONE Green—The PoE daughter card is installed and detected. Off—The PoE daughter card is not detected or is not installed. Table 2-11 WS-X6148-GE-TX and Variants Physical and Environmental Specifications Item Specification Dimensions (H x W x D) 1.2 x 14.4 x 16 in. (3.0 x 35.6 x 40.6 cm). Occupies one slot in the chassis. Weight WS-X6148-GE-TX (base module only)—7.6 lb (3.4 kg) WS-X6148A-GE-TX (base module only)—6.6 lb (3 kg) Table 2-10 WS-X6148-GE-TX and WS-X6148A-GE-TX Features (continued) Feature Description
2-18 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Power and heat numbersBase module (WS-X6148-GE-TX) –Module current—2.47 A –Module power—104.00 W –AC-input power— 130.00W –AC heat dissipation—443.00 BTU/hour –DC-input power—139.00 W –DC heat dissipation—476.00 BTU/hour WS-X6148-GE-45AF (base module + PoE daughter card) –Module current—2.65 A –Module power—111.30 W –AC-input power—139.13 W –AC heat dissipation—475.11 BTU/hour –DC-input power—149.60 W –DC heat dissipation—510.87 BTU/hour WS-X6148V-GE-TX (base module + PoE daughter card) –Module current—2.89 A –Module power—121.38 W –AC-input power—151.72 W –AC heat dissipation—518.14 BTU/hour –DC-input power—163.15 W –DC heat dissipation—557.14 BTU/hour WS-X6148A-GE-TX (enhanced base module) –Module current— 2.50A –Module power—105.00 W –AC-input power—131.25 W –AC heat dissipation—448.22 BTU/hour –DC-input power—141.13 W –DC heat dissipation—481.96 BTU/hour WS-X6148A-GE-45AF (enhanced base module + PoE daughter card) –Module current—2.68 A –Module power—112.56 W –AC-input power—140.70 W –AC heat dissipation—480.49 BTU/hour –DC-input power—151.29 W –DC heat dissipation—516.66 BTU/hour Table 2-11 WS-X6148-GE-TX and Variants Physical and Environmental Specifications (continued) Item Specification
2-19 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules WS-X6148-RJ21 Ethernet Modules The WS-X6148-RJ21 Ethernet module and its two variants provide 48 10/100-Mbps full- or half-duplex ports. (See Table 2-12.) Figure 2-6 shows the module front panel. Figure 2-6 WS-X6148-RJ-21 Ethernet Module Front Panel Table 2-13 lists the features and descriptions for the modules, and Table 2-14 lists the physical and environmental specifications for the modules. Environment Operating temperature Certified for operation: 32° to 104°F (0° to 40°C) Designed and tested for operation: 32° to 130°F (0° to 55°C) Humidity (RH) ambient (noncondensing)10 to 90% Operating altitude Certified for operation: 0 to 6500 ft (0 to 2000 m) Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m) Table 2-11 WS-X6148-GE-TX and Variants Physical and Environmental Specifications (continued) Item Specification Table 2-12 WS-X6148-RJ21 Ethernet Module Variants Module Description WS-X6148-RJ21 Base module without daughter cards installed. WS-X6148-21AF Base module equipped with a factory-installed IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF). WS-X6148-RJ21V Base module equipped with a factory-installed Cisco prestandard PoE daughter card (WS-F6K-VPWR-GE). 18459248 PORT 10/100 BASE-T ETHERNETSWITCHING MODULEPHONE WS-X6148-RJ-21 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748 13-241-1225-3637-48 STATUS Table 2-13 WS-X6148-RJ-21 Ethernet Modules Features Feature Description Ports per module 48 ports (all variants). Ports are numbered from left to right. First connector, ports 1–12; second connector, ports 13–24; third connector, ports 25–32; fourth connector, ports 33–48. 4 port groups Port ranges per port group: 1–12, 13–24, 25–36, 37–48 Port connector type RJ-21 (all variants)
2-20 Catalyst 6500 Series Ethernet Modules Installation Guide OL-6265-04 Chapter 2 Ethernet Switching Modules 10/100 and 10/100/1000 Ethernet Modules Cabling distance 328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable (all variants) Buffer size 128 KB per port (all variants) QoS Number of egress queues: 2 Number of ingress queues: 1 Number of thresholds per egress queue: 2 Number of thresholds per ingress queue: 4 Maximum frame size Up to 8092 bytes per frame (all variants) Module oversubscription rate 1.2:1 Supervisor engine support Supported by the following supervisor engines: Supervisor Engine 2 Supervisor Engine 32 Supervisor Engine 32 PISA Supervisor Engine 720 Supervisor Engine 720-10GE Software support With Supervisor Engine 2—12.1(12c)E1 With Supervisor Engine 2 and WS-F6K-VPWR PoE daughter card—12.1(13)E With Supervisor Engine 32—12.2(18)SXF With Supervisor Engine 32 PISA—12.2(18)ZY With Supervisor Engine 720 except with WS-F6K-48-AF PoE daughter card—12.2(14)SX With Supervisor Engine 720 and WS-F6K-48-AF PoE daughter card—12.2(17d)SXB With Supervisor Engine 720-10GE—12.2(33)SXH Catalyst OS—6.4(11) (for software release 6.x); 7.6(9) (for software release 7.x) Queues per port All variants: Tx—2q2t Rx—1q4t Table 2-13 WS-X6148-RJ-21 Ethernet Modules Features (continued) Feature Description