Canon printer imageCLASS D1180 User Manual

							Fax (D1180/D1170/D1150) 
6-50
ECM Reception
ECM Reception
ECM (Error Correction Mode) reduces the effect of system and line errors on documents that 
occur during sending or receiving with another fax machine that supports ECM. If the other 
machine does not support ECM, this setting is ignored. If reception speed appears to be 
extremely slow, you may be able to speed up reception time by turning ECM off. The default 
setting is .
If you want to communicate using ECM, it is necessary that ECM Reception be set in both the sending and receiving 
machines. This function does not operate unless ECM is set in both machines.
Even when ECM is set, errors can sometimes occur due to a poor telephone line connection.
If there is trouble with the line, it will take more time to receive the documents.
–
–
–
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  4 . R X   S E T T I N G S F A X   S E T T I N G S
5 
Press  or  to select , then 
press [OK].
  1 . E C M   R X R X   S E T T I N G S
6 
Press  or  to select  or 
, then press [OK].
                                    O N E C M   R X
: The ECM reception is not activated.
: The ECM reception is activated.
7 
Press  [Stop/Reset] to return to the 
standby mode.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-51
Optional Settings for FaxTel Mode
Optional Settings for FaxTel Mode
If you select  for the receive mode, you can specify the length of the detection time, 
ring time, and machine’s action after the ringing ends. The default settings are as follows:: 
: 
: 
–
–
–
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  4 . R X   S E T T I N G S F A X   S E T T I N G S
5 
Press  or  to select , then press [OK].
  2 . F A X / T E L   O P T .   S E T R X   S E T T I N G S
6 
Press  or  to select , then press [OK].
  1 . R I N G   S T A R T   T I M E F A X / T E L   O P T .   S E T
7 
Use , , or   –  [numeric keys] to 
specify the duration (4 to 30 seconds) for 
which the machine attempts to detect 
the fax tone before it starts ringing, then 
press [OK].
                                6 S E C R I N G   S T A R T   T I M E
If the machine receives a fax, the machine does 
not ring and switches to the receive mode 
automatically.
8 
Press  or  to select , then press [OK].
  2 . F / T   R I N G   T I M E F A X / T E L   O P T .   S E T 
						

							Fax (D1180/D1170/D1150) 
6-52
Optional Settings for FaxTel Mode
9 
Use , , or  –  [numeric keys] to 
specify the duration (15 to 300 seconds) 
of ringing, then press [OK].
                              1 5 S E C F / T   R I N G   T I M E
10
  Press  or  to select , then press [OK].
  3 . F / T   S W I T C H   A C T I O N F A X / T E L   O P T .   S E T
11
  Press  or  to select the action the 
machine will take after the ringing ends, 
then press [OK].
                          R E C E I V E F / T   S W I T C H   A C T I O N
: Receives a fax.
: Disconnects the call.
12
  Press  [Stop/Reset] to return to the 
standby mode.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-53
Optional Settings for DRPD Mode
Optional Settings for DRPD Mode
If you select  for the receive mode, you can select the ring pattern assigned by your 
telephone company. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  4 . R X   S E T T I N G S F A X   S E T T I N G S
5 
Press  or  to select , then press [OK].
  3 . D R P D : S E L E C T   F A X R X   S E T T I N G S
6 
Press  or  to select a ring pattern, 
then press [OK].
                  D O U B L E   R I N G D R P D : S E L E C T   F A X
You can select from the following ring patterns:
, , 
, , 
or 
7 
Press  [Stop/Reset] to return to the 
standby mode. 
						

							Fax (D1180/D1170/D1150) 
6-54
Setting the Incoming Ring
Setting the Incoming Ring
This function enables you to activate the ring alert of the external telephone if  
is set to  or . Selecting  enables you to distinguish between the fax 
reception and answer voice calls when you pick up the external telephone while it is ringing. 
The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  4 . R X   S E T T I N G S F A X   S E T T I N G S
5 
Press  or  to select , then press [OK].
  4 . I N C O M I N G   R I N G R X   S E T T I N G S
6 
Press  or  to select  or  
then press [OK].
                                    O N I N C O M I N G   R I N G
: Incoming tone does not ring. If you 
select , skip to step 8.
: Incoming tone rings. If you select 
, go to the next step.
7 
Press  or  to set the number of ring 
times (1 to 99 times), then press [OK].
                            2 T I M E S R I N G   C O U N T
8 
Press  [Stop/Reset] to return to the 
standby mode.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-55
Receiving Documents Manually with an External Telephone (Remote RX)
Receiving Documents Manually with an 
External Telephone (Remote RX)
You can connect one external telephone to the machine. When the telephone rings with the 
machine in the Manual receive mode, you can use the external telephone to start receiving 
the document without walking over to the machine. The default settings are as follows:: 
: 
–
–
Activating the Remote Reception
Follow this procedure to turn on the remote 
reception.
If  is set to , the machine switches to 
the document receive mode after the external telephone rings 
for a specified time. (See “Adjusting the Auto Switch Time,” on 
p

. 6-57.)
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  4 . R X   S E T T I N G S F A X   S E T T I N G S
5 
Press  or  to select , 
then press [OK].
  5 . R E M O T E   R X R X   S E T T I N G S
6 
Press  or  to select , then 
press [OK].
                                    O N R E M O T E   R X
If you do not want to change the default remote 
reception ID, skip to step 9.
7 
Press  [Clear] to delete the default 
remote reception ID of 25.
2 5 R E M O T E   R X   I D 
						

							Fax (D1180/D1170/D1150) 
6-56
Receiving Documents Manually with an External Telephone (Remote RX)
8 
Use  –  [numeric keys] to enter a new 
remote reception ID (a combination of 
two characters), then press [OK].
0 0 R E M O T E   R X   I D
Ex.
9 
Press  [Stop/Reset] to return to the 
standby mode.
Receiving Documents with the 
Remote Reception
Follow this procedure to receive fax documents 
using the remote reception.
Before using the remote reception to receive fax documents, 
make sure the followings:
An external telephone is connected properly.
Your telephone is set to tone dialing.
1 
When you receive a call, pick up the 
external telephone.
2 
When you hear a beep, use  –  
[numeric keys] to enter the two-digit 
remote reception ID to start reception.
If you hear someone on the line, you can start 
talking to the other party.
3 
When the reception is complete, hang up 
the telephone.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-57
Adjusting the Auto Switch Time
Adjusting the Auto Switch Time
This function enables you to set the machine to switch to document receive mode after 
ringing for a specified length of time in the Manual mode. The default setting is .
This function is only available when the  is set to .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  4 . R X   S E T T I N G S F A X   S E T T I N G S
5 
Press  or  to select , then press [OK].
  6 . M A N U A L / A U T O R X   S E T T I N G S
6 
Press  or  to select  or 
, then press [OK].
                                    O N M A N U A L / A U T O
: The external telephone keeps ringing 
until someone answers the call manually. If 
you select , skip to step 8.
: The machine switches to the 
document receive mode after the external 
telephone rings for a specified time. If you 
select , go to the next step.
7 
Use , , or   –  [numeric keys] to 
enter the length of time (1 to 99 seconds) 
that elapses before the machine switches 
to document receiving, then press [OK].
                              1 5 S E C F / T   R I N G   T I M E
8 
Press  [Stop/Reset] to return to the 
standby mode.
–
– 
						

							Fax (D1180/D1170/D1150) 
6-58
Receive Start Speed
Receive Start Speed
This function enables you to change the receive start speeds, which is useful when there is 
difficulty initiating the receiving of a document. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
1 0 . S Y S T E M   S E T T I N G S M E N U
If the System Manager ID and System Password 
have been set, enter the System Manager ID and 
System Password using 
 –  [numeric keys], 
then press 
 [Log In/Out].
3 
Press  or  to select 
, then press [OK].
  6 . C O M M U N I C A T I O N S S Y S T E M   S E T T I N G S
4 
Press  or  to select , then press [OK].
  3 . F A X   S E T T I N G S C O M M U N I C A T I O N S
5 
Press  or  to select , then press [OK].
  2 . R X   S T A R T   S P E E D F A X   S E T T I N G S
6 
Press  or  to select the desired 
receive speed, then press [OK].
                        3 3 6 0 0 b p s R X   S T A R T   S P E E D
If your document reception is slow in starting, 
this may mean that the telephone lines in your 
area are in poor condition. Select a slower 
speed. You can select , 
, , , 
, or .
7 
Press  [Stop/Reset] to return to the 
standby mode. 
						

							Fax (D1180/D1170/D1150) 
6-59
Receiving Documents in Memory without Printing Out (Memory Lock Reception)
Receiving Documents in Memory without 
Printing Out (Memory Lock Reception)
Normally a document prints as soon as you receive it. However, there may be occasions 
when you want the machine to store all documents in memory until you are ready to print 
them. Locking the machine to receive and store all documents in memory is called memory 
lock reception. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
1 0 . S Y S T E M   S E T T I N G S M E N U
If the System Manager ID and System Password 
have been set, enter the System Manager ID and 
System Password using 
 –  [numeric keys], 
then press 
 [Log In/Out].
3 
Press  or  to select 
, then press [OK].
  6 . C O M M U N I C A T I O N S S Y S T E M   S E T T I N G S
4 
Press  or  to select , then press [OK].
  4 . M E M O R Y   L O C K C O M M U N I C A T I O N S
If the memory lock password has been set, enter 
the password using 
  –  [numeric keys], then 
press [OK].
5 
Press  or  to select , then 
press [OK].
                                    O N M E M O R Y   L O C K
When you select , the machine starts to 
print the received documents in memory.
6 
Press  or  to select , 
then press [OK].
  1 . P A S S W O R D M E M O R Y   L O C K
7 
If you want to set or change a password 
for the Memory Lock mode, use 
  – 
 [numeric keys] to enter the memory 
reception password (up to seven digits), 
then press [OK].
1 2 P A S S W O R D
Ex.
If you set a password, it will be necessary to 
enter the password whenever you want to 
change the Memory Lock mode settings, or 
cancel the Memory Lock mode.
If you do not want to set the Memory Lock 
with a password, press [OK] without entering 
any numbers.
–
–