Canon Pixma Mx492 User Guide
Have a look at the manual Canon Pixma Mx492 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Forwarding Scanned Data to the Computer Using the Operation Panel of the Machine Before forwarding scanned data to the computer, confirm the following:• MP Drivers are installed. If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from our website. • The machine is connected to a computer correctly. Make sure that the machine is connected to the computer correctly. Do not plug in or unplug the USB cable while the machine is in operation, or when the computer is in the sleep or standby mode. If you perform scanning via a network connection, make sure that all the required settings have been specified. Network Scan Settings • The destination and the file name are specified in Canon IJ Scan Utility. You can specify the destination and the file name in Canon IJ Scan Utility. For details on settings of Canon IJ Scan Utility: Settings Dialog Box Follow the procedure below to forward scanned data to the computer. 1. Make sure that the machine is turned on. 2. Press the SCAN button. If you forward the scanned data to a computer for the first time, the Scan menu screen is displayed. Go to step 3. If you have forwarded the scanned data to a computer, the Scan standby screen is displayed. * The Scan standby screen for USB-connected computer If you change the destination or scan settings, press the Menu button, then go to step 3. Go to step 8 if you do not change the destination or scan settings. 3. Use the button to select Save to, then press the OK button. 4. Use the button to select the computer to forward the scanned data, then press the OK button. If you forward the data to the USB-connected computer, select Local (USB). 661
If you forward the data to the LAN-connected computer, select a name of the computer to forward thescanned data. Note • If you select Search again and press the OK button, the machine starts searching for the connected computers again. • When you forward the scanned data to the computer using WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista), select Active for WSD scan from dev. on WSD setting on Other settings in LAN settings under Device settings . 5. Make sure that Document type is selected, then press the OK button. 6. Use the button to select the document type, then press the OK button. Note • When you forward the scanned data to the computer searched using WSD, you cannot select the document type. • The * (asterisk) on the LCD indicates the current setting. Auto scan The machine detects the type of the originals automatically and the image is forwarded in theoptimized size, resolution and data format. Important • Load originals properly according to their type; otherwise, some originals may not be scanned properly. For details on how to load the original: Loading Originals • The following items can be scanned: Photos, postcards, visiting cards, magazines, newspapers, documents, BD/DVD/CDs • The following items cannot be scanned properly. • A4 sized photos • Documents smaller than 5 inches x 7 inches (127 mm x 178 mm) such as a paperback with its backbone cut off • Originals on thin white paper • Long and narrow originals such as panoramic photographs • When you scan originals from the ADF, it may take longer to scan the first page. Document Scans the original on the platen glass or in the ADF applying the optimized settings for scanning a document. Photo Scans the original on the platen glass as a photo data applying the optimized settings for scanning a photo. 662
7.Specify the scan settings. Specify each scan setting in order. Use the button to select a setting item, then press the OK button. Use the button to adjust each setting item, then press the OK button. The next setting item is displayed. Note • For details on each setting item: Setting Items for Scanning Using the Operation Panel of the Machine • Go to step 8 when Auto scan is selected for Document type . The Scan standby screen is displayed after all the settings have been specified. 8. Load the original document on the platen glass or in the ADF. 9. Press the Color button for color scanning, or the Black button for black & white scanning. Note • When you forward the scanned data to the computer using WSD, press the Color button. • If the original is not loaded properly, a message is displayed on the LCD. Load the original on the platen glass or in the ADF according to the scan settings. • If you load the original in the ADF: The machine starts scanning and scanned data is forwarded to the computer. • If you load the original on the platen glass: ◦ When you select JPEG or TIFF for Data format , the machine starts scanning and scanned data is forwarded to the computer. ◦ When you select PDF or Compact PDF for Data format , the confirmation screen asking you if you continue scanning is displayed after scanning is complete. Selecting Yes and pressing the OK button allow you to scan the originals continuously. Load the next document on the platen glass and start scanning. By selecting No and pressing the OK button, scanning is complete and the data is forwarded to the computer in one PDF file. Scanned data is forwarded to the computer according to the settings specified in Canon IJ Scan Utility. Remove the original on the platen glass or from the document output slot after scanning is complete. Important • If the scanning result with Auto scan is not satisfactory, select Document or Photo according to the original in step 6, then specify the scan size or other setting items in step 7. 663
When the program selection screen is displayed:• If you are using Windows 8.1, Windows 8, Windows 7, or Windows Vista: The program selection screen may be displayed after pressing the Color or Black button. In this case, select Canon IJ Scan Utility and click OK. • If you are using Windows XP: The program selection screen may be displayed after pressing the Color or Black button for the first time. In this case, specify Canon IJ Scan Utility as the application software to use, select Always use this program for this action , then click OK. From the next time, Canon IJ Scan Utility is automatically started. If you want to scan originals with advanced settings, or if you want to edit or print the scanned images: If you scan originals from a computer using My Image Garden, My Image Garden enables you to edit the scanned images, such as optimizing or trimming. In addition, you can edit or print the scanned images using the compatible application software to make better use of them. Scanning Photos and Documents Note • You can use a WIA-compliant application software and the Control Panel (Windows XP only) to scan originals with this machine. For details: Other Scanning Methods • If you want to convert a scanned document to text: Extracting Text from Scanned Images (OCR) 664
Setting Items for Scanning Using the Operation Panel of the Machine You can change the scan settings such as the scan size, resolution, or data format.Use the button to select a setting item, then press the OK button. Use the button to adjust each setting item, then press the OK button. The next setting item is displayed. Note • The * (asterisk) on the LCD indicates the current setting. • The scan setting cannot be specified under the following conditions: • When Auto scan is selected for Document type to forward the scanned data to the computer • When you forward the scanned data to the computer using WSD (one of the network protocols supported in Windows 8.1, Windows 8, Windows 7, and Windows Vista) • Some setting items cannot be specified in combination with other setting items, the document type, or the destination to save the data. • The settings of the scan size, resolution, and data format are retained even if the machine is turned off. • When you forward the scanned data to the computer, you can specify the destination and file nameusing Canon IJ Scan Utility. Settings Dialog Box • If you scan originals from the computer, you can scan with advanced settings. For details on scanning from the computer: Scanning Photos and Documents • Scan size Select the size of the original. Ex: If you select Auto scan(A) -Singl , the machine detects the page size automatically and starts scanning. If you select Auto scan(A) -Multi to save to the computer, you can scan several originals at a time. Note • When Legal is selected, load the original in the ADF. • When 4"x6", 10x15 , 5"x7" , 13x18 , or Auto scan(A) -Singl is selected, load the original on the platen glass. • Some of setting items are not available depending on the country or region of purchase. • Data format Select the data format of the scanned data. Ex: 665
• Scan resolution Select the resolution for scanning. Ex: 666
Network Scan SettingsYou can connect your scanner or printer to a network to share it among multiple computers or scan images into a specified computer. Important • Multiple users cannot scan at the same time. Note • Complete the network settings of your scanner or printer beforehand from the Setup CD-ROM or by following the instructions on the web page. • With network connection, scanning takes longer than USB connection. Complete the following settings to enable scanning over a network. Specifying Your Scanner or Printer Use IJ Network Scanner Selector EX to specify the scanner you want to use. By specifying the scanner, you can scan over a network from your computer or the operation panel. Important • If the product you want to use is changed with IJ Network Scanner Selector EX, the product used forscanning with IJ Scan Utility changes as well. The product for scanning from the operation panel also changes. If your scanner or printer is not selected in IJ Scan Utility, check that it is selected with IJ Network Scanner Selector EX. Refer to "IJ Network Scanner Selector EX Menu and Setting Screen" for your model from Home of the Online Manual for details. • To scan from the operation panel, specify your scanner or printer with IJ Network Scanner Selector EX beforehand. 1. Check that IJ Network Scanner Selector EX is running. If IJ Network Scanner Selector EX is running, (IJ Network Scanner Selector EX) appears in the notification area on the desktop. Click to check the hidden icons as well. Note • If the icon is not displayed in the notification area on the desktop, follow the procedure below to start. • Windows 8.1/Windows 8: Click IJ Network Scanner Selector EX on the Start screen. If IJ Network Scanner Selector EX is not displayed on the Start screen, select the Search charm, then search for "IJ Network Scanner Selector EX". • Windows 7/Windows Vista/Windows XP: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX . 667
The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screenappears. In that case, skip ahead to Step 3.2. In the notification area on the desktop, right-click (IJ Network Scanner Selector EX), then select Settings.... The Scan-from-PC Settings screen appears. 3. Select your scanner or printer from Scanners. Normally, the MAC address of your scanner or printer is already selected after the network setup. In that case, you do not need to select it again. Important • If multiple scanners exist on the network, multiple model names appear. In that case, you can select one scanner per model. 4. Click OK. Note • The scanner selected in the Scan-from-PC Settings screen will be automatically selected in the Scan- from-Operation-Panel Settings screen as well. Setting for Scanning with IJ Scan Utility To scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner orprinter with IJ Network Scanner Selector EX, then follow the steps below to change the connection status between it and the computer. 1. Start IJ Scan Utility. 2. Select "Canon XXX series Network" (where "XXX" is the model name) for Product Name . 3. Click Settings... to use another scanner connected to a network. 4. Click (General Settings), then click Select in Product Name . The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears. Select the scanner you want to use and click OK. 5. In the Settings (General Settings) dialog box, click OK. The IJ Scan Utility main screen reappears. You can scan via a network connection. Setting for Scanning from the Operation Panel You can make the setting for scanning from the operation panel. 668
Important• Set IJ Scan Utility to use your scanner or printer via a network connection beforehand. Setting for Scanning with IJ Scan Utility 1. Check that IJ Network Scanner Selector EX is running. If IJ Network Scanner Selector EX is running, (IJ Network Scanner Selector EX) appears in the notification area on the desktop. Click to check the hidden icons as well. Note • If the icon is not displayed in the notification area on the desktop, follow the procedure below to start. • Windows 8.1/Windows 8: Click IJ Network Scanner Selector EX on the Start screen. If IJ Network Scanner Selector EX is not displayed on the Start screen, select the Search charm, then search for "IJ Network Scanner Selector EX". • Windows 7/Windows Vista/Windows XP: From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX > IJ Network Scanner Selector EX . The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen appears. In that case, skip ahead to Step 3. 2. In the notification area on the desktop, right-click (IJ Network Scanner Selector EX), then select Settings.... The Scan-from-PC Settings screen appears. 3. Click Scan-from-Operation-Panel Settings . The Scan-from-Operation-Panel Settings screen appears. 4. Select your scanner or printer from Scanners and click OK. Select the MAC address of your scanner or printer. Note • When multiple scanners are connected via a network, you can select up to three scanners. 5. In the Scan-from-PC Settings screen, click OK. Note • If your scanner or printer does not appear, check the following, click OK to close the screen, then reopen it and try selecting again. • MP Drivers is installed • Network settings of your scanner or printer is completed after installing the MP Drivers • Network communication between your scanner or printer and computer is enabled 669
If your scanner or printer still does not appear, refer to "Problems with Network Communication" foryour model from Home of the Online Manual. 670