Canon Pixma Mx492 User Guide
Have a look at the manual Canon Pixma Mx492 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Note• This item has the same function as Refresh in the View menu. 3. Configuration... Click to configure settings of the selected printer. Configuration Screen Note • You cannot configure a printer that has the status Not Found. • This item has the same function as Configuration... in the Settings menu. Canon IJ Network Tool Menus The following menu is displayed from the Canon IJ Network Tool screen. 1. File menu Exit Exits IJ Network Tool. 2. View menu Status Displays the Status screen to confirm the printer connection status and wireless communication status. In the access point mode, this item is grayed out and you cannot confirm the printer connection status. Status Screen Refresh Updates and displays the contents of Printers: on the Canon IJ Network Tool screen to the latest information. Important • To change the printer's network settings using IJ Network Tool, it must be connected via a LAN. 251
•If No Driver is displayed for the name, associate the port with the printer. When the Printer Driver Is Not Associated with a Port • If Not Found is displayed for the status, check the followings: • The wireless router is turned on. • When using wired LAN, the LAN cable is connected properly. • If the printer on a network is not detected, make sure that the printer is turned on, then select Refresh . It may take several minutes to detect printers. If the printer is not yet detected, connect the machine and the computer with a USB cable, then select Refresh. • If the printer is being used from another computer, a screen is displayed informing you of this condition. Note • This item has the same function as Update in the Canon IJ Network Tool screen. Network Information Displays the Network Information screen to confirm the network settings of the printer and the computer. Network Information Screen Display Warning Automatically Enables or disables automatic display of the instruction screen. When this menu is selected, the instruction screen is displayed if one or more ports are unavailable for printing. 3. Settings menu Configuration... Displays the Configuration screen to configure settings of the selected printer. Configuration Screen Note • This item has the same function as Configuration... in the Canon IJ Network Tool screen. Enable switch printer function When you cannot use your printer, you can use the same one on the network instead. When you enable this function and you cannot use your printer, the screen to confirm if you start searching the same printer as yours is displayed. Follow the message on the screen. Note • When this function is enabled, a check mark appears on the menu. Associate Port... Displays the Associate Port screen and you can associate a port with the printer. Associate Port Screen This menu is available when No Driver is displayed for the selected printer. Associating a port with the printer enables you to use it. 252
Maintenance...Displays the Maintenance screen to return the network settings of the printer to factory default and to mount the card slot as the network drive. Maintenance Screen Set up printer's access point mode... You can change the access point mode settings. Perform settings following the message on thescreen. If you change the Encryption Method: setting and the Password: setting on the Set up printer's access point mode screen, the changed settings are applied to the printer settings. Note • You can use this function only when you are using a computer compatible with the wireless LAN. 4. Help menu Instructions Displays this guide. About Displays the version of IJ Network Tool. 253
Configuration ScreenYou can change the configuration of the printer selected on the Canon IJ Network Tool screen. Click the tab to select the sheet to change the settings. The following screen is the example to change the setting on the Wireless LAN sheet. Note • This screen is not available depending on the printer you are using. For details on each sheet, see the following. Wireless LAN Sheet Wired LAN Sheet Admin Password Sheet 254
Wireless LAN Sheet Note • This screen is not available depending on the printer you are using. Allows you to set the printer with wireless LAN connection. To display the Wireless LAN sheet, click the Wireless LAN tab on the Configuration screen. 1. Network Type: Displays the wireless LAN mode currently selected. Infrastructure Connects the printer to the wireless LAN with a wireless router. Access point mode Connects external wireless communication devices (e.g. computers, smartphones, or tablets) to theprinter using it as an access point (wireless router). Note • When Access point mode is displayed on Network Type:, you cannot change the settings on the Wireless LAN sheet or the Admin Password sheet. • You can perform setting from Set up printer's access point mode... on the Settings menu when you use the printer with the access point mode. Depending on the printer you are using, you can change the settings using the operation panel. 2. SSID: The network name (SSID) of the wireless LAN currently used is displayed. In the access point mode, the access point name (SSID) of the printer is displayed. As the initial settings, the unique value is displayed. Note • Enter the same SSID that the wireless router is configured to use. The SSID is case-sensitive. 255
3.Search... The Search screen is displayed to select a wireless router to connect to. Search Screen Note • When IJ Network Tool runs over a LAN, the button is grayed out and cannot be selected. Connect the printer and the computer with a USB cable temporarily to change the settings. 4. Encryption Method: Select the encryption method used over the wireless LAN. Do not use Select to disable encryption. Use WEP Transmission is encrypted using a WEP key you specified. If a WEP key has not been set, the WEP Details screen is displayed automatically. To change WEP settings set before, click Configuration... to display the screen. Changing the WEP Detailed Settings Use WPA/WPA2 Transmission is encrypted using a WPA/WPA2 key you specified. The security has been strengthened more than WEP. If a WPA/WPA2 key has not been set, the Authentication Type Confirmation screen is displayed automatically. To change WPA/WPA2 settings set before, click Configuration... to display the WPA/WPA2 Details screen. Changing the WPA/WPA2 Detailed Settings 5. Configuration... The detailed settings screen is displayed. The WEP or the WPA/WPA2 key selected in Encryption Method: can be confirmed and changed. For details on WEP setting: Changing the WEP Detailed Settings For details on WPA/WPA2 setting: Changing the WPA/WPA2 Detailed Settings 6. TCP/IP Setup: Sets the IP address of the printer to be used over the LAN. Specify a value appropriate for your network environment. Get IP address automatically Select this option to use an IP address automatically assigned by a DHCP server. DHCP server functionality must be enabled on your wireless router. Use next IP address Select this option if no DHCP server functionality is available in your setup where you use theprinter, or you want to use a particular IP address or a fixed IP address. 256
Search Screen Note • This screen is not available depending on the printer you are using. The wireless routers detected are listed. 1. Detected Wireless Routers: The signal strength from the wireless router, encryption type, name of wireless router, and the radio channel can be confirmed. Important • If you connect to a network that is not protected with security measures, there is a risk of disclosing data such as your personal information to a third party. Note • Signal strength is displayed as follows. : Good : Fair : Poor • Type of encryption is displayed as follows. Blank: No encryption WEP : WEP is set WPA/WPA2 : WPA/WPA2 is set 2. Update Click to update the list of wireless routers when your target wireless router is not detected.If the target wireless router is set to the stealth mode, click Cancel to return to the previous screen and enter the wireless router's SSID in SSID: on the Wireless LAN sheet. Wireless LAN Sheet Note • When detecting your target wireless router, make sure that the wireless router is turned on. 257
3.SetClick to set the wireless router's SSID in SSID: on the Wireless LAN sheet. Note • The WPA/WPA2 Details screen or the WEP Details screen appears if the selected wireless router is encrypted. In this case, configure the details to use the same encryption settings set to the wireless router. • Wireless routers that cannot be used by this machine (including those configured to use different encryption methods) are displayed grayed out and cannot be configured. 258
WEP Details Screen Note • This screen is not available depending on the printer you are using. Specifies the printer WEP settings. Note • When changing the password (WEP key) of the printer, the same change must be made to the password (WEP key) of the wireless router. 1. WEP Key: Enter the same key as the one set to the wireless router. The number of characters and character type that can be entered differ depending on the combination of the key length and key format. Key Length64bit128bitKey FormatASCII5 characters13 charactersHexadecimal ( Hex )10 digits26 digits2. Key Length: Select either 64bit or 128bit . 3. Key Format: Select either ASCII or Hex . 4. Key ID: Select the Key ID (index) set to the wireless router. 5. Authentication: Select the authentication method to authenticate the printer's access to the wireless router. Select Auto or Open System or Shared Key . 259
WPA/WPA2 Details Screen Note • This screen is not available depending on the printer you are using. Specify the printer WPA/WPA2 settings. The value displayed on the screen differs depending on the present settings. 1. Authentication Type: Displays the type of authentication used for client authentication. This machine supports the PSK authentication method. 2. Dynamic Encryption Type: Displays the dynamic encryption method. 3. Change Settings... Displays the Authentication Type Confirmation screen. Authentication Type Confirmation Screen 260