Brother HL 7050N User Manual

							1 - 2 ABOUT THIS PRINTER
HL7050_US_UG_FM5.5
■An interface cable is not a standard accessory. Some 
computers have a USB and a parallel port. Please buy the 
appropriate cable for the interface you are going to use. 
■Most parallel cables support bi-directional communication, 
but some might have an incompatible pin assignment or 
may not be IEEE 1284-compliant.
■Do not use a parallel cable that is longer than 1.8 metres 
(6 feet).
■The power cord length may differ slightly depending on the 
country where you bought the printer. 
■If you use a USB cable, make sure it is a high-speed twisted 
cable (12 Mbps ), and that you connect it to the USB 
connector of your PC. Do not connect the USB cable to the 
front of your PC or to the iMacs keyboard.
For visually impaired users we have prepared two HTML files 
on the supplied CD-ROM: index_win.html and 
index_mac.html. These files can be read by Screen Reader 
text-to-speech software.
 
						

							ABOUT THIS PRINTER 1 - 3
HL7050_US_UG_FM5.5
What is on the CD-ROM? (For Windows®)
1Install Software 
You can install the printer driver and the following items:
For All Users (For more information, see Chapter 2)
■Printer Driver
For Administrators
■Web BRAdmin
■BRAdmin Professional
■Driver Deployment Wizard
■Network Print Software
■Storage Manager
■Analysis Tool 
1
3
4
2
 
						

							1 - 4 ABOUT THIS PRINTER
HL7050_US_UG_FM5.5
2Documentation
Look at the printer Users Guide, Network Users Guide and 
other documents.
3Brother Solutions Center
An introduction to our website. You can easily access it and 
receive the latest drivers and information for this printer.
4Maintenance Tutorial
See the maintenance videos for this printer. We recommend 
that you watch the videos before getting started.
 
						

							ABOUT THIS PRINTER 1 - 5
HL7050_US_UG_FM5.5
What is on the CD-ROM? (For Macintosh® on a Network)  
1BR-Script PPD Installer
Printer driver (For more information, see Chapter 2)
This printer supports Mac
© OS versions 8.6 - 9.2 and 
Mac©OS X 10.1 or later. 
2Users Guides
Look at the printer Users Guide, Network Users Guide and 
other documents.
3Brother Solutions Center
An introduction to our website. You can easily access it and 
receive the latest drivers and information for this printer.
4Maintenance Tutorial
See the maintenance videos for this printer. We recommend 
that you watch the videos before getting started.
3
4
2
1
 
						

							1 - 6 ABOUT THIS PRINTER
HL7050_US_UG_FM5.5
General view
Figure 1-2
1Control Panel
2Face-down Output Tray
3Support Flap
4Top Cover
5Multi-purpose Tray
6Multi-purpose Extension Support
7Paper Tray (Tray 1)
1
2
3
4
5
6
7
 
						

							ABOUT THIS PRINTER 1 - 7
HL7050_US_UG_FM5.5
Figure 1-3
1Face-up Output Tray
2Parallel Interface Connector 
3USB Connector 
4Serial Interface Connector 
5Network Board Slot 
6Card Slot 
(For optional CompactFlashTM card)
7Duplex Unit Connector 
8AC Power Connector 
9Power Switch 
1
2
3
4
5
6798
 
						

							1 - 8 ABOUT THIS PRINTER
HL7050_US_UG_FM5.5
Positioning the printer
Please read the following before you use the printer. 
Power supply
Use the printer within the recommended power range:
AC power: ±10% of the rated voltage
Frequency: 50/60 Hz (220-240 V) or 50/60 Hz (110-120 V)
The power cord, including extensions, should be no longer than 5 
metres (16½ feet). 
Do not share the same power circuit with other high-power 
appliances, such as an air conditioner, copier, shredder and so on.  
If you cannot avoid using the printer with these appliances, we 
recommend that you use a voltage transformer or a high-frequency 
noise filter. 
Use a voltage regulator if the power source is not stable. 
 
						

							ABOUT THIS PRINTER 1 - 9
HL7050_US_UG_FM5.5
Environment
Only use the printer within the following ranges of temperature and 
humidity:
Possible operation range
Temperature: 10°C to 32.5°C (50°F to 90.5°F)
Humidity: 20% to 80% (without condensation) 
Recommended operation range
Temperature: 17.5°C to 25°C (63.5°F to 77°F)
Humidity: 30% to 70% (without condensation)
The machine must be level within 5 mm (0.2 in.) both front-to-back 
and left-to-right.
To avoid ozone building up, put this machine in a large well-
ventilated room.
 
						

							1 - 10 ABOUT THIS PRINTER
HL7050_US_UG_FM5.5
Space needed to install your printer
Leave enough space around the printer. You will need this space to 
use the printer properly. The recommended (or minimum) space 
requirements are as follows.
No OptionsInstall Optional Duplex Unit, Lower Tray and Mailbox. 
Figure 1-4 Figure 1-5
100 mm 
3.94 inches
500 mm 
19.7 in.
400 mm 
15.8 in.
150 mm 
5.9 in. 600 mm 
23.6 in.
100 mm 
3.94 in.
600 mm 
23.6 in.
 
						

							ABOUT THIS PRINTER 1 - 11
HL7050_US_UG_FM5.5
■Do not put the printer in direct sunlight. If you have to put it near a 
window, use a blind or a heavy curtain to protect the printer from 
direct sunlight. 
■Do not install the printer near other electronic equipment.
■Do not drop, bang or shake the printer.  Do not put the printer on 
a surface that vibrates.  Do not expose the printer to open flames 
or salty or corrosive gases. 
■Keep the printer clean. Do not put the printer in a dusty place. 
■Do not put the printer near an air conditioner or humidifier.
■Make sure that the power outlet is near the machine and is easy 
to get to so that, if there is an emergency, it can be easily 
unplugged.
■Only connect the machine to the power source described under 
Power Supply in this Users Guide.
■Put the printer on a flat, horizontal surface.
■Do not damage, break or make any changes to the power cord.  
Do not put heavy objects on it, pull it hard or bend it more than 
necessary.  These actions could damage the cord.  A frayed or 
damaged cord might cause an electrical fire hazard.
■Ventilate the room where you are using the printer.
■Do not put the printer where the ventilation hole of the printer is 
blocked. Keep a gap of approximately 100 mm (4 in.) between the 
ventilation hole and the wall.
■Be careful not to trip on the legs of the base unit.