Brother HL 7050N User Manual
Have a look at the manual Brother HL 7050N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3 - 37 CONTROL PANEL HL7050_US_UG_FM5.5 HP-GL Mode The HP-GL mode is the emulation mode in which this printer supports the HP-GL language of the Hewlett-Packard plotter model HP-7475A. Many graphics and CAD applications support this type of plotter. Use this mode so your printer will work when printing from those types of applications. EPSON FX-850 and IBM Proprinter XL Mode The EPSON FX-850 and IBM Proprinter XL modes are the emulation modes that this printer supports to meet the industry-standard for dot matrix printers. Some applications support these dot matrix printer emulations. Use these emulation modes so your printer will work well when printing from those types of applications.
CONTROL PANEL 3 - 38 HL7050_US_UG_FM5.5 List of factory settings The following table shows the factory settings. ■The emulation mode affects the setting. Effective modes are shown in brackets in the following table. ■The following settings cannot be restored to the factory settings with the reset menu in the factory settings mode - interface mode, HRC setting, page protection, scalable font, lock panel, page counter and local language for display messages. ■The copy setting is always restored to the factory setting when the printer is turned off and on again. ■It is not possible to reset the network settings using the control panel. If you want to reset the print server to its factory settings (resetting all information such as the password and IP address information), hold down the Network Test button on the Network board (NC-4100h) for more than 5 seconds. Display ShowsSubmenuFactory setting PAPER SOURCE=AUTO PRIORITY=MP>T1>T2>T3>T4 MP FIRST=OFF MP SIZE=ANY/A4/LETTER MANUAL FEED=OFF DUPLEX=OFF OUTPUT=STANDARD QUALITY RESOLUTION=600 HRC=MEDIUM TONER SAVE=OFF DENSITY0 SETUP LANGUAGE=ENGLISH PANEL CONTROLLOWER LCD=NONE LCD DENSITY=1 AUTO ONLINE=ON BUTTON REPEAT=0.1 SEC MESSAGE SCROLL=LEVEL 1 POWER SAVE TIME=30MIN
3 - 39 CONTROL PANEL HL7050_US_UG_FM5.5 SETUP (continued)TONER LOWCONTINUE AUTO CONTINUE=OFF LOCK PANEL=OFF REPRINT=ON PAGE PROTECTION=AUTO EMULATION=AUTO(EPSON) KEEP PCL=OFF JAM RECOVERY=ON RAMDISK SIZE=0MB TIME STYLE=YY/MM/DD hh:mm PRINT MENU MEDIA TYPE=PLAIN PAPER PAPER=A4/LETTER COPIES=1 ORIENTATION=PORTRAIT PRINT POSITIONX OFFSET=0 Y OFFSET=0 AUTO FF TIME=5 FF SUPPRESS=OFF HP LASERJET FONT NO.=59 FONT PITCH=10.00/12.00 SYMBOLSET=PC8 AUTO LF=OFF AUTO CR=OFF AUTO WRAP=OFF AUTO SKIP=ON LEFT MARGIN=#### RIGHT MARGIN=#### TOP MARGIN=#### BOTTOM MARGIN=#### LINES=#### Display ShowsSubmenuFactory setting
CONTROL PANEL 3 - 40 HL7050_US_UG_FM5.5 PRINT MENU (continued)EPSON FX-850FONT NO.=59 FONT PITCH=10.00/12.00 SYMBOLSET=US ASCIF AUTO LF=OFF AUTO MASK=OFF LEFT MARGIN=#### RIGHT MARGIN=#### TOP MARGIN=#### BOTTOM MARGIN=#### LINES=#### IBM PROPRINTER FONT NO.=59 FONT PITCH=10.00/12.00 SYMBOLSET=PC8 AUTO LF=OFF AUTO CR=OFF LEFT MARGIN=#### RIGHT MARGIN=#### TOP MARGIN=#### BOTTOM MARGIN=#### LINES=#### HP-GLCHAR SET(STD)=#### CHAR SET(ALT)=#### PEN # SIZE PEN # GRAY BR-SCRIPTERROR PRINT=OFF NETWORK TCP/IPTCP/IP ENABLE=ON IP ADDRESS=192.0.0.192 SUBNET MASK=0.0.0.0 GATEWAY=0.0.0.0 Display ShowsSubmenuFactory setting
3 - 41 CONTROL PANEL HL7050_US_UG_FM5.5 NETWORK (continued)TCP/IP (continued)IP BOOT TRIES=3 IP METHOD=AUTO NETWARENETWARE ENABLE=ON NET FRAME=AUTO APPLETALK=ON NETBEUI=ON DLC/LLC=ON BANYAN=ON LAT=ON NETBIOS/IP=ON APIPA=OFF ENET=AUTO INTERFACE SELECT=AUTO AUTO IF TIME=5 INPUT BUFFER=LEVEL 3 PARALLELHIGH SPEED=ON BI-DIR=ON RS-232CFAX MODE=OFF BAUD RATE=9600 CODE TYPE=8 BITS PARITY=NONE STOP BIT=1 BITS X ON/X OFF=ON DTR(ER)=ON ROBUST XON=OFF RING DELAY=0 REDUCTION=AUTO RAM SIZE=1MB RECEIVE=ON INTERVAL=OFF Display ShowsSubmenuFactory setting
CONTROL PANEL 3 - 42 HL7050_US_UG_FM5.5 For visually-impaired users Braille symbols The control panel buttons are marked with Braille characters for visually-impaired users as shown in the table. *Braille indicates the first 2 or 3 letters of the English button name. For example, Job Cancel is shown as “can” and + (Plus) is shown as “plu” in Braille. ButtonAbbreviationsBraille* GoGo Job CancelCan ReprintRep +Plu -Min SetSet BackBac
3 - 43 CONTROL PANEL HL7050_US_UG_FM5.5 Buzz indications The control panel has a buzzer. The buzzer will sound when one of the control panel buttons is pressed, or the status of the printer changes. See the table for a description of the buzzer meaings. You can change the settings of the buzzer by using the buttons on the control panel. To chagne the setting of the buzzer, press the + (plus) button until SETUP is displayed, then press the Set button. Press the + (plus) button until ERROR BUZZER, PANEL BUZZER or BUZZER VOLUME is displayed and press Set. See SETUP in this chapter for a description of the buzzer settings. Buzz indicationsConditions A short buzz■When you enter any information using the button. Two short buzzes■When you come back to the top menu option after you move forward or backward through the menus. ■When you move to another menu level. Five short buzzes■When an error occur. A long buzz■When you set any optional menu setting. Two long buzzes■When the printer becomes online. ■When the printer becomes READY status after a warming up condition. A short and a long buzz■When you enter wrong information.
4 - 1 OPTIONS 4 HL7050_US_UG_FM5.5 4Options Optional accessories and supplies This printer has the following optional accessories. You can increase the capabilities of the printer with these items. Options Lower tray unit(Three paper trays)Duplex unit Mailbox unit Network board (For HL-7050 only) LT-7000 DX-7000 MX-7000 series NC-4100h see 4-3 see 4-4 see 4-6 see 4-8 CompactFlash card DIMM memory HDD Ir-DA interface HD-EX IR-1000 see 4-11 see 4-13 see 4-17 see 4-21 Optional font package Optional Barcode FontOptional stabilizer BS-3000 BT-1000 SB-4000 see 4-22 see 4-22 see 4-2
4 - 2 OPTIONS HL7050_US_UG_FM5.5 Small pad for lower tray unit and stabilizer (SB-4000) When you have the following printer options, you must install the small pads or the optional stabilizer. 1 Lower tray 2 Lower trays 3 Lower trays Non-mailbox unit -------------------- Mailbox unit (5 bins) -------------------- Mailbox unit (10 bins) --------------------
OPTIONS 4 - 3 HL7050_US_UG_FM5.5 Lower-tray unit (LT-7000) The lower-tray unit (Trays 2/3/4) is an optional device that can hold extra paper. It can hold up to 500 sheets of paper (80 g/m2 or 20 lb) in each tray. When all three trays are installed, the printer can hold up to 2100 sheets of plain paper. If you want to buy an optional lower-tray unit, call the dealer you bought the printer from. Expands up to a total of 2100 sheets Figure 4-1 To install the lower-tray unit, please see the Users Guide that we have supplied with the lower tray. ■If you put the lower-tray unit on the floor, we strongly recommend that you put the small pads that we have supplied on the underside of the lower-tray unit as shown above. ■Even if a tray has been moved to another tray position, the driver will find the correct tray and print according to the setting. MP tray (100 sheets) Paper tray (500 sheets) Lower-tray unit (500 sheets x 3 trays)