Brother HL 7050N User Manual
Have a look at the manual Brother HL 7050N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 331 Brother manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
3 - 17 CONTROL PANEL HL7050_US_UG_FM5.5 Back light LightMeaning OFF The printer is off-line or in sleep status. Green (General)Ready to print Printing Warming Up Red (Error)There is a problem with the printer. Orange (Setting)Choosing a menu Setting Reprint times Pause
CONTROL PANEL 3 - 18 HL7050_US_UG_FM5.5 LCD message You can choose the message that is displayed on the second line of the LCD as shown below. Select NONE, PAGE COUNTER or JOB NAME in the lower LCD setting of the SETUP menu. READY READY JOB NAME READY PAGE = XXXX
3 - 19 CONTROL PANEL HL7050_US_UG_FM5.5 Printer status messages The following table shows the printer status messages that are displayed during normal operation: Printer Status MessageMeaning READYReady to print. PROCESSINGBusy processing data. SLEEPIn Sleep state PRINTINGPrinting. PROGRAMING-WAITAccessing CompactFlash card or HDD. SELF TESTPerforming self-diagnostics. PAUSEThe printer has suspended its functions. Pressing the Go button starts the printer again. NOW INITIALIZINGThe printer is setting up. WARMING UPThe printer is warming up. RAM SIZE=XX MBThis printer has XX MB memory. JOB CANCELLINGCancelling the job. RESOLUTION ADAPTPrinting with reduced resolution. PRESS SET TO PRINTPress the Set button to start printing. RESET TO FACTORY SETTINGThe printer setting returns to the factory settings. FAX SENDINGSending fax data (Please see http://solutions.brother.com for information about fax mode.) FAX RECEIVINGReceiving fax data (Please see http://solutions.brother.com for information about the fax mode.)
CONTROL PANEL 3 - 20 HL7050_US_UG_FM5.5 How to use the control panel When you operate the Menu buttons (+, -, Set or Back), remember the following basic steps: ■If no control panel operations are performed for 30 seconds, the LCD automatically returns to READY. ■When you press the Set button to choose a setting, an asterisk appears at the end of the display for a short time. After that, the display returns to the previous menu level. ■After changing the status or a setting, pressing the Back button before you press the Set button will cause the display to return to the previous menu level with the original settings unchanged. ■There are two ways to input numbers. You can press + or - to scroll up or down one number at a time, or you can hold down + or - to scroll faster. The blinking number is the one that you can change.
3 - 21 CONTROL PANEL HL7050_US_UG_FM5.5 For example: When you want to turn the MP FIRST setting ON The default setting is OFF. Turn this setting ON if you want to. Press any of the Menu buttons (+, -, Set or Back) to turn the printer off-line. Press the + or - button to move forward or backward through the menus. Press the Set button to move to the next menu level. Press the + or - button. Press the Set button. Press the + button. Press Set button. An asterisk * briefly appears at the end of the display. The default setting is indicated by an * READY --MENU-- INFORMATION --MENU-- PAPER PAPER SOURCE PAPER MP FIRST MP FIRST =ON * MP FIRST =OFF MP FIRST =OFF *
CONTROL PANEL 3 - 22 HL7050_US_UG_FM5.5 Control Panel LCD menu There are eight menus. For more information about the selections available in each menu, please see the pages listed below. ■INFORMATION For more information, see page 3-23. ■PAPER For more information, see page 3-24. ■QUALITY For more information, see page 3-24. ■SETUP For more information, see page 3-25. ■PRINT MENU For more information, see page 3-27. ■NETWORK For more information, see page 3-31. ■INTERFACE For more information, see page 3-32. ■RESET MENU For more information, see page 3-33. The control panel LCD names for the paper trays are as follows. Paper tray TRAY 1 Multi-purpose tray MP TRAY Optional lower tray TRAY 2, TRAY 3, TRAY 4 Optional Duplex unit for Duplex printingDX Optional Mailbox unit MX
3 - 23 CONTROL PANEL HL7050_US_UG_FM5.5 INFORMATION Display ShowsDescription PRINT SETTINGSPrints the print settings page. PRINT TESTPrints the test page. PRINT DEMOPrints the demonstration sheet. PRINT FILE LISTPrints the card list. PRINT FONTSPrints the font list and samples. CLEANING PAGEPrint the cleaning page to clean the thermistor. VERSIONSubsetting Description SER.NO=#########Shows Printer serial number. ROM VER=####Shows ROM version. ROM DATE=##/##/##Shows ROM date. NET VER=####Shows Network version (only Network users). NET DATE=##/##/##Shows Network build date (only Network users). RAM SIZE=###MBShows the size of memory in this printer. MAINTENANCE PAGE COUNTER =######Shows the current total printed pages. DRUM COUNT =######Shows the pages printed with drum unit. REMAIN DRUM =######Shows the pages left to print with drum unit. REMAIN PF KIT MP =######Shows the pages left to print with PF kit MP. REMAIN PF KIT 1 =######Shows the pages left to print with PF kit 1. REMAIN PF KIT 2 =######Shows the pages left to print with PF kit 2. REMAIN PF KIT 3 =######Shows the pages left to print with PF kit 3. REMAIN PF KIT 4 =######Shows the pages left to print with PF kit 4. REMAIN FUSER =######Shows the pages left to print with fuser unit. REMAIN LASER =######Shows the pages left to print with laser unit.
CONTROL PANEL 3 - 24 HL7050_US_UG_FM5.5 PAPER Display ShowsDescription SOURCE=AUTO/MP/TRAY 1/TRAY 2/TRAY 3/TRAY 4 Select which paper tray the paper will be fed from. PRIORITY=MP>T1>T2>T3>T4* MP>T4>T3>T2>T1 T1>T2>T3>T4>MP T4>T3>T2>T1>MP MP FIRST=ON/OFF Select whether to feed paper from the MP tray as a priority. MP SIZE=ANY/LETTER/LEGAL/A4... Select the size of paper you loaded in the MP tray, for example, A4/Letter/ Legal/... MANUAL FEED=OFF/ON Select whether or not you want to feed paper manually. DUPLEX=OFF/ON(LONG BIND)/ON(SHORT BIND) Select whether you want to automatically print on both sides of the paper. OUTPUT=STANDARD/MAILBOX1-10/MX STACK/ MX SORT Select where you want the printed pages to go. QUALITY Display ShowsDescription RESOLUTION=300/600/1200 You can select a print resolution of 300, 600 or 1200 dpi (dots per inch). HRC=OFF/LIGHT/MEDIUM/DARK HRC: High Resolution Control (HRC) offers improved print quality of letters, numbers and graphics that conventional laser printers cannot achieve, with a resolution of 300 or 600 dpi. TONER SAVE=OFF/ON DENSITY=-2:0:2 Increase or decrease the print density.
3 - 25 CONTROL PANEL HL7050_US_UG_FM5.5 SETUP Display ShowsDescription LANGUAGE= ENGLISH /FRANÇAIS /... PANEL CONTROLSubsetting Description LOWER LCD =NONE/PAGE COUNTER/JOB NAME LCD DENSITY =1/2 AUTO ONLINE =ON/OFF BUTTON REPEAT Set the time for the display message to change when holding the + or - button at intervals of: 0.1, 0.2, 0.3, 0.4, 0.5, 1.0, 1.5 or 2.0 seconds. The factory setting is 0.1. MESSAGE SCROLLSet the time in seconds that an LCD message will scroll across the display. From Level 1=0.2 to Level 10=2.0. The factory setting is Level 1. ERROR BUZZEROFF NORMAL There will be three sets of five Buzzes when an error occurs. SPECIAL Buzzes five times consecutively until the error is cleared. PANEL BUZZEROFF Disables buzz function when you press the button. ON Enables buzz function when you press the button. BUZZER VOLUMELOW Makes the buzz lower. HIGH Makes the buzz higher. POWER SAVE TIME=1MIN:240MIN TONER LOW=CONTINUE/STOP CONT: Continue printing even if there is a TONER LOW error. STOP: Stop printing if there is a TONER LOW error. AUTO CONTINUE=OFF/ON LOCK PANEL=OFF/ON Turn the lock panel setting ON or OFF. PASS NO.=### REPRINT=ON/OFF PAGE PROTECTIONPROTECT = AUTOAUTO, OFF, LETTER, A4 OR LEGAL EMULATION=AUTO (EPSON)/AUTO(IBM)/HP LASER JET/....
CONTROL PANEL 3 - 26 HL7050_US_UG_FM5.5 KEEP PCL=OFF/ON JAM RECOVERY=OFF/ON RAMDISK SIZE=0/1/2/...MB RESTART PRINTER? DELETE STORAGEDelete the data in CompactFlash card or HDD. Subsetting Description SECURE FILE Select the user name, job name and password. PUBLIC FILE Select the user name and job name. PROOF FILE Select the user name and job name. DATA ID (HD) =#### DATA ID (CF) =#### MACRO ID (HD) =#### MACRO ID (CF) =#### FONT ID (HD) =#### FONT ID (CF) =#### FORMAT (HD) OK? FORMAT (CF) OK? TIME STYLE=YY /MM /DD or MM /DD /YY or DD /MM /YY DATE & TIMEDISPLAY YYYY/MM/DD HH/MM YEAR =#### MONTH =## DAY =## HOUR =## MINUTE =## SETUP (continued) Display ShowsDescription