Xerox Phaser 6180MFP User Manual

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-8
Billing Meters
Displays the number of processed print jobs on the control panel. The meter is divided 
according to the color modes.
■Total Impressions: Displays the total number of pages printed.
■Color Impressions: Displays the total number of pages printed in color.
■Black Impressions: Displays the total number of pages printed in black/white.
See also: 
Checking Page Counts on page 11-10
Admin Menu
This menu contains eight...

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-9
PCL Settings
■Paper Supply: Specifies the paper tray to be used for printing.
■Au t o (default): The tray is selected automatically when print data is sent.
■Tray 1 (MPT)
■Tr a y  2
■Tr a y  3
■Paper Size: Specifies the default paper size.
■Orientation: The paper printing direction can be selected from Portrait and Landscape. 
The default is Portrait.
■2 Sided Print: Specifies whether to perform 2-sided printing. The default is Off....

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-10
PostScript Settings
■PS Error Report: Specifies whether an error report is printed when a PostScript error 
occurs.
■PS Job Time-Out: Specifies the maximum execution time for a PostScript job to 
complete. If the job exceeds the specified number of minutes, a PostScript error occurs.
■Paper Select Mode: Specifies how the tray is selected for PostScript print jobs.
■Au t o  
The tray is selected as set in PCL mode.
■Select From Tray...

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-11
■IP Address, Subnet Mask, and Gateway Address: These items are used to check the 
addresses that have been obtained automatically or to specify addresses manually. 
Enter the address in the format of xxx.xxx.xxx.xxx. You can specify values in the 
range of 0 to 255 for xxx. 
 
To set addresses manually, set Get IP Address to Panel. 
 
IP addresses are managed in the entire network. An incorrect IP address may affect the 
whole network....

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-12
Parallel Settings
Specifies the settings for the parallel interface.
Note: You need to restart the printer to activate the new settings. After changing the settings, 
turn off the printer, and then turn it on again.
ECP
Specifies if the ECP communication mode of the parallel interface is enabled or disabled. 
Adobe Protocol
Use Adobe Protocol menu to specify PostScript communication protocol for the parallel 
interface. Restart the...

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-13
Fax Settings
The Fax Settings menu contains the following items.
■Interval Timer: Specifies the interval time between resend attempts.
■Number of Redial: Specifies the number of redial attempts. 
■Int. of Redial: Specifies the time between redial attempts.
■Ans Select: Specifies the receiving mode:
■TEL Mode: Automatic fax reception is turned off. You can receive a fax by picking 
up the handset of the external phone, and then pressing...

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-14
■Your Fax Number: Specifies your telephone number, which is printed at the top of each 
page sent from your printer.
■Device Name: Specifies your name or your companies name, which is printed on the 
report sheet.
■DRPD Pattern: Specifies a distinctive ring pattern for use with DRPD service. DRPD 
Patterns are specified by your telephone company. The patterns provided with your 
multifunction printer are shown below, with Pattern 1 at...

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-15
■Extel Hook Thresh: Specifies the threshold value for the external telephone.
■Country: Specifies the country where the printer is used.
Note: Country must be set before faxes can be sent.
■FWD Error Print: To print the documents failed to transfer when Forward Set Print is 
set to Off.
■Off: Does not print documents that fail to transfer when Forward Set Print is set to 
Off.
■On: Prints documents that fail to transfer when Forward...

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-16
■Time-Out: You can cancel a printing process when it goes beyond a set time period. Set 
the time until the print job is canceled. When this timeout expires, the print job is 
canceled.
■5 sec. to 300 sec. (default: 30 sec.): Specifies the amount of time in increments of 1 
second the printer waits for additional data before it cancels the job.
■Off: Cannot cancel.
■Clock Settings: Specifies the date and time.
■Set Date
■Set Time
■Date...

Description of Menu Items
Phaser® 6180MFP Multifunction Printer 
9-17
■Banner Sheet: Specifies the settings for the banner sheet.
■Insert Position (default: Off): Selects the position to output the banner sheet from: 
Off, Front, Back, and Front & Back. When Off is selected, the banner sheet is not 
printed.
■Specify Tray (default: Tray 1 (MPT)): Specifies the tray from which the banner sheet 
is output: Tray 1 (MPT), Tray 2, or Tray 3.
Tray 3 is displayed only when the optional sheet feeder is...