Vodavi Starplus Triad S Installation Programming Manual

Leading Digit2-165
Chapter 2 - Features and Operation
Leading Digit
Description
System administrators can tailor the system numbering plan to change all 3-digit numbers 
into 4-digit numbers that begin with a desired digit 0-8.
Programming Steps
1. Press FLASH and dial [09]. The following message displays:
2. Press Button #9. The following message displays:
3. Dial a valid number (0-8) to identify the desired leading digit.
4. Press HOLD to save the entry.
Least Cost Routing
For information about Least...

2-166Least Cost Routing
Chapter 2 - Features and Operation
INTENTIONALLY BLANK 

Message Wait2-167
Chapter 2 - Features and Operation
Message Wait
Description
Stations that are busy, unattended, or in DND can be left a message indication by other 
stations in the system. Up to five messages can be left at one keyset. Upon return to the 
station, the user can press the flashing MSG WAIT button to ring each party in sequential 
order.
Operation
To leave a message waiting indication:
If you dial a station that is busy, unattended, or in DND, you can leave a message waiting 
indication....

2-168 Mes sa ge  Wa it in g  Re mi nd e r To n e
Chapter 2 - Features and Operation
4. Replace the handset or press the ON/OFF button to end the call.
To answer a message waiting indication:
If your MSG button is lit, you have a message waiting for you. The first message left is the first 
one called.
1. Press MSG. Station that left message is signaled with tone ringing.
2. If called station does not answer, press MSG once to leave message.

SINGLE LINE TELEPHONE
To leave a message waiting indication:...

Music-On-Hold2-169
Chapter 2 - Features and Operation
Music-On-Hold
A music source, when connected to the system, provides music to all lines on Hold, parked 
calls, transferred calls and calls waiting to be answered by Automatic Call Distribution (ACD) 
or Uniform Call Distribution (UCD).
This feature can be allowed or denied on a system-wide basis in database programming. This 
feature can also allow or deny Music-On-Hold heard on each CO line and is programmable on 
a per CO line basis. This feature...

2-170Music-On-Hold
Chapter 2 - Features and Operation
Programming Steps
1. Press the MUSIC CH # flexible button (FLASH 09, Button #1 through #6). The following 
message displays:
X= 3-8
XXX = Maximum CO Lines in your system
YYY = CO Line number specified for use for this channel
2. Enter a valid number (001-XXX) that corresponds to the CO line number desired.
3. Press HOLD to save the entry. A confirmation tone sounds.
Music-On-Hold - Enable/Disable
Description
When connected to the system, a music...

Music-On-Hold2-171
Chapter 2 - Features and Operation
Programming Steps
1. Press FLASH and dial [40]. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being 
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible Button #19 (Page A) is lit.
4. Press the Page B flexible button (Button #20). The following message displays:
XXX-XXX = CO Line Range
5....

2-172Mute Key
Chapter 2 - Features and Operation
Mute Key
Description
Pressing the MUTE button while in the speakerphone mode or using the handset disables the 
microphone but does not affect the speech coming over the speaker or handset. Pressing the 
illuminated MUTE button again reactivates the microphone.
Operation
To disable the microphone:
1. Press MUTE while off-hook on speakerphone or handset to activate.
2. Press MUTE again to deactivate. Mute automatically deactivates upon call termination....

Name In Display2-173
Chapter 2 - Features and Operation
3. Press the SPEED button to complete the programming process.
To erase your name:
1. Dial [690] on the dial pad.
2. Press the SPEED button to complete the erasing process.

SINGLE LINE TELEPHONE
To create your name:
1. Dial [690] on the dial pad.
2. Enter the name (up to 7 characters may be entered) by using keys on the dial pad.
3. Briefly depress the hookswitch and release to complete the programming process.
To erase your name:
1. Dial [690] on...

2-174 Na m e / Nu mb e r Tra n sl a ti o n  Ta b l e
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press the NAME/NUMBER DISPLAY flexible button (Button #15). The following message 
displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Extension Number
[1] = Name
6. Press HOLD to save the entry. A confirmation...