Home > Vodavi > Communications System > Vodavi Starplus Triad S Installation Programming Manual

Vodavi Starplus Triad S Installation Programming Manual

Here you can view all the pages of manual Vodavi Starplus Triad S Installation Programming Manual. The Vodavi manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 181

Keyset Mode2-155
Chapter 2 - Features and Operation
The following Modes are described:
Inactive -- No CTI information is sent/received by the telephone.
PC Phone -- CTI information used with Vodavi Discovery Desktop and Discovery PC Phone 
software must be set to 4800 baud rate.
AT D -- This is the modem dialing command. The telephone recognizes the ATD and 
accepts digits after the command. This allows the PC connection to the telephone to use 
the AT Ringing command. (Available baud rates are: 1200,...

Page 182

2-156Keyset Mode
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the KEYSET MODE flexible button (Button #12). The following message displays:
6. Enter a valid number (0-6) to change the mode of a digital telephone:
[0] = Inactive Mode (normal mode...

Page 183

Last Number Redial2-157
Chapter 2 - Features and Operation
2. Press [] to scroll through the keyset modes.
3. Press [#] to scroll through the baud rates.
4. Press the HOLD button to save the desired entries.
ELECTRONIC TELEPHONE
Not applicable
SINGLE LINE TELEPHONE
Not applicable
Conditions
» Telephone must be in AT command mode to process AT commands.
» CTI information is still sent out the RS-232 port in AT command mode.
» The ATD command is always accepted by the telephone while it is in the AT...

Page 184

2-158LCD
Chapter 2 - Features and Operation
SINGLE LINE TELEPHONE
Not applicable
LCD
LCD Display - Contrast
Description
There are four contrast adjustments available to adjust the LCD for different lighting levels.
Operation
At idle phone:
Press volume bar up or down for desired effect.
SINGLE LINE TELEPHONE
Not applicable
Conditions
» BGM must be inactive.
» Handset must be in cradle.
» ON/OFF button must be set to OFF.
LC D In t era c t ive  D is pl a y
Description
The Executive Digital Telephone...

Page 185

LCD2-159
Chapter 2 - Features and Operation
Table 2-13: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
Idle Station
Manually Dialing Outgoing Calls
Recalling Line from Hold
Recalling Line from Another Station
Connected to an Incoming CO line
Intercom Call
Camp On
Conference
Internal Page
* Features available with optional software
STATION XXX
MMM DD YY HH:MM am
STA XXXNAME
MMM DD YY HH:MM am
STATION XXXNAME
MMM DD YY HH:MM am
18005551212
LINE XXX HH:MM:SS
LINE XXX...

Page 186

2-160LCD
Chapter 2 - Features and Operation
External Zone Page and External All 
Call Page
All Call Page
Meet Me Page
Station Call Forward
(originating station and name in 
display)
Station No-Answer Call Forward
(originating station)
Station Busy/
No-Answer Call Forward
(originating station)
Station Busy
Call Forward
(originating station)
* Features available with optional software
Table 2-13: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
EXTERNAL PAGE
ZONE X...

Page 187

LCD2-161
Chapter 2 - Features and Operation
Forwarded Call
(name in display)
For warded
Intercom Call
Station Forwarded to Voice Mail 
Group (station idle)
Station Forwarded to ACD* or UCD 
Group (station idle)
Preset Forward
Station Call to Station Forwarded to 
a Voice Mail Group*
Call Pick-Up
Exclusive Hold
Do Not Disturb
* Features available with optional software
Table 2-13: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
FORWARDED TO STA XXX
VIA STA XXX HH:MM...

Page 188

2-162LCD
Chapter 2 - Features and Operation
Call Back
Outside Line Transfer
Message Waiting
Reply to a Message Waiting
Programmed Flash Command (F)
Programmed Pause Command (P)
Programmed Pulse-To-Tone 
Switchover (S)
CO Line Queuing
* Features available with optional software
Table 2-13: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
CALL BACK FROM STA XXX
MMM DD YY HH:MM am
CALL BACK FROM ..(name)..
MMM DD YY HH:MM am
CALL FROM STA XXX
MMM DD YY HH:MM am
CALL FROM...

Page 189

LCD2-163
Chapter 2 - Features and Operation
Hunt Groups
ACD* or UCD Groups
Ringing CO Lines
Display Security
Station Forwarding Off-Net
Call to Station Forwarded Off-Net
(before and after a call is answered)
Calls in Queue
(supervisor)
Calls in Queue
(using dial code)
ACD* or UCD
Unavailable Mode (Agent Station)
ACD* or UCD
Station Call to Voice Mail Group Pilot 
Number
* Features available with optional software
Table 2-13: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station...

Page 190

2-164LCD
Chapter 2 - Features and Operation
Dial By Name
Off-Hook Voice Over (OHVO)
Executive O verride
Voice Mail* Transfer with ID Digits
Repeat Redial
Call Coverage Station
(after call is answered at coverage 
station in a non-network system or 
within same Node)
(after call is answered at coverage 
station in a network with a call 
passed across a switch)
Name/Number Display at Idle
Scrollable Canned Messages
ACD* Transfer Display
* Features available with optional software
Table 2-13: Liquid Crystal...
Start reading Vodavi Starplus Triad S Installation Programming Manual

Related Manuals for Vodavi Starplus Triad S Installation Programming Manual

All Vodavi manuals