Vodavi Starplus Triad S Installation Programming Manual

Paging2-185
Chapter 2 - Features and Operation
Programming Steps
1. Press FLASH and dial [50] or dial [51]. Flexible button #24 (New Range) is lit and one of 
the following messages displays:
2. Enter the range of fixed station numbers (100-131) to be programmed. If only one station 
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible...

2-186Paging
Chapter 2 - Features and Operation
Paging - Meet Me
Description
Users may answer a page call from any phone in the system by dialing [770]. The party who 
initiated the page must remain off-hook.
Operation
To request another party meet you on a page:
1. Dial the desired internal or external paging code.
2. Request that party meet you on the page.
3. Do not hang up, wait for the requested party to answer. As soon as the paged party 
answers and is connected to you, the page circuit releases....

Paging2-187
Chapter 2 - Features and Operation
Programming Steps
1. Press the PAGE WARN TONE flexible button (FLASH 05, Button #5).
2. Enter a valid number (0 or 1) that corresponds with the following:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Page Warning Tone is enabled.
Paging Zone(s)
Description
Stations are assigned to Page Zones. At least one station must be assigned to a Zone for that 
Zone to be active. Stations can be in any combination...

2-188Pause Timer
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates. 
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the PAGE ZONE flexible button (Button #6). The following message displays:
6. Enter a valid number (1-8) to program Paging Zone(s).
7. Press HOLD to save the entry. A confirmation tone...

Personal Messages2-189
Chapter 2 - Features and Operation
The Pause Timer determines the length of the pause when programmed for use with speed 
dialing and LCR Insert Tables. The Pause Timer setting is variable from 1–9 seconds. There is 
no 0 entry. Using this feature may affect Centrex transfers.
Programing Steps
1. Press the PAUSE TIMER flexible button (FLASH 01, Button #7). The following message 
displays:
2. Enter a valid number on the dial pad that corresponds to 1-9 seconds.
3. Press HOLD to save...

2-190Personal Messages
Chapter 2 - Features and Operation
To cancel a pre-assigned message:
1. Either dial the Personal Messages code [633] + [00],  dial [662], or press the DND button.
2. Replace handset. DND button LED extinguishes.
Conditions
» This feature is unavailable at Attendant stations.
» Stations cannot be call forwarded or in DND and have this feature active.
Custom Messages
Description
Each station can select from ten possible custom messages to display on the LCD of a key 
telephone...

Personal Messages2-191
Chapter 2 - Features and Operation
Conditions
» This feature is not available to attendant stations.
Date and Time Entry Messages
Description
Station users can activate certain messages that let users enter a specific time or return date. 
These messages appear on the calling station’s display to alert them of the desired party’s 
return time or date.
Operation
To activate a message with a custom return time or date:
1. Dial the Message Access code [633] on the dial pad.
2. Then...

2-192Personal Messages
Chapter 2 - Features and Operation
To cancel the message:
1. Either dial the Personal Messages code [633] + [00],  dial [662], or press the DND button.
2. Replace handset. DND button LED extinguishes.

SINGLE LINE TELEPHONE
Not applicable
Scrollable Canned Messages
Description
The Scrollable Canned Message feature allows the user to use a single digit [#] or [
] to scroll 
through the canned messages and select one. When the desired message is displayed, 
pressing the hold button...

Personal Messages2-193
Chapter 2 - Features and Operation
Conditions
» The telephone receiving the message must be a display telephone.
» When a message displays by a key telephone, the DND button LED flashes at 15 ipm.
» When DND is invoked on the telephone the message cancels.
» Message Access (with a desired message) may be assigned to a flexible button.
» Messages may be entered while off-hook on a call if an intercom call is camped onto the 
station. This causes the station calling to see the...

2-194Preferred Line Answer
Chapter 2 - Features and Operation
Preferred Line Answer
Description
A station with Preferred Line Answer can answer any assigned outside, transferred, or 
recalling line, or queue callbacks by lifting the handset or pressing the ON/OFF button. The 
station MUST be physically ringing, to function properly.
Use Flash 50 programming when you want to modify a range of stations’ attributes using 
fixed station numbers.
Use Flash 51 programming to modify a single station’s...