Vodavi Starplus Triad S Installation Programming Manual

Flexible Button Assignment2-135
Chapter 2 - Features and Operation
Display Flexible Buttons
Description
Each time the DISPLAY BUTTONS flexible button is subsequently pressed, the next four 
buttons display starting with the lowest button number.

When a button is assigned as flexible button [0], the user can program any features or 
functions on the buttons to which they have access.

When the buttons are programmed with user programmed functions, the display shows 
the function assigned to the button....

2-136Flexible Button Assignment
Chapter 2 - Features and Operation
4. Press button #20. The display updates to reflect current programming for Page B.
5. Press the DISPLAY BUT TONS flexible button (Button #14) to display programming 
assignments. The following message displays:
BB = Button Number
LCD above is an example. Refer to the following table for additional legend information.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
XXX -  XXX  PAGE B
ENTER  BUTTON  NUMBERSXXX      PAGE B
ENTER...

Flexible Button Assignment2-137
Chapter 2 - Features and Operation
Flex
ButtonDesignationFlex
ButtonDesignation
1LGIN Agent  Primary Login LOOP Loop
1LOUT Agent  Primary Logout LNR Last Number Redial
2LGIN Agent Secondary Login MMP Meet Me Page
2LOUT Agent Secondary Logout MON Monitor Key
A[AAAA] ACD Group with Pilot Number MRVM Voice Mail Mailbox (Remote)
ACALM Attendant Clear Alarm MSG Message Wait Key
ACCT Account Code Enter MUSIC Background Music
AMEM Agent Member Display MUTE Mute Key
ANS Answering...

2-138Flexible Numbering
Chapter 2 - Features and Operation
Conditions
» Only one station at a time can be programmed when using a flexible station number.
» When in Flash 51 programming, if you press HOLD without specifying a flexible number 
to be programmed, you will get the station that is in port/station 100.
Flexible Numbering 
Description 
The Flexible Numbering feature allows the system numbering plan to be modified from its 
default value (refer to “Default Numbering Plan” on page D-13) to...

Flexible Numbering2-139
Chapter 2 - Features and Operation
3. Press HOLD. The fixed and flexible number, as well as a description of the code, displays 
on the LCD.
To change a Flexible Code:
1. Select the desired code.
2. Press Button 1. The red LED illuminates.
3. Delete the flexible number by pressing button 2 and then pressing HOLD. The flexible 
number field will be blank.
4. Enter the new code (2-4 digits).
5. Press HOLD.
To erase a Flexible Code:
1. Select the desired code.
2. Press Button 1 (must...

2-140Group Listening
Chapter 2 - Features and Operation
Station Port Inquiry
Description
When using flexible numbering, some programming steps require the fixed code. This 
feature allows you to dial a feature code to reveal the fixed port for your station.
Operation
Dial feature code [611]. The fixed Station/Port Number for your station displays.
Group Listening
Description
All digital key stations have a built-in speakerphone. Station users may use the speaker to 
monitor a call while using the handset...

Headset Mode2-141
Chapter 2 - Features and Operation
Conditions
» While using the speakerphone, lifting the handset turns off the speakerphone. To activate 
group listening, press the ON/OFF button (to ON) while the handset is off-hook.
» While in group listening mode, pressing the MUTE button causes the transmit from the 
handset to be muted (the speakerphone microphone is already muted). However, the 
distant end is still heard over the handset receiver and the station speaker.
» If full speakerphone...

2-142Hold - Exclusive
Chapter 2 - Features and Operation
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press preprogrammed HEADSET MODE button. LED lights steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button. LED extinguishes.

SINGLE LINE TELEPHONE
Not applicable
Hold - Exclusive
Description
When a line is placed on Exclusive Hold, no other station in the system can retrieve the call.
Operation
Exclusive Hold may be programmed and...

Hold - Exclusive2-143
Chapter 2 - Features and Operation
Exclusive Hold Flash Rate
Description
The Exclusive Hold flash rate is the rate at which a CO Line button or Loop button flashes 
when a call is placed on Exclusive Hold. This flash rate can be programmed to 29 different 
options identified in the flash rate table. This enables the programmer to customize the key 
system configuration to desired flash rates.
Programming Steps
1. Press the EXCLUSIVE HOLD flexible button (FLASH 07, Button #12). The...

2-144Hold - Preference
Chapter 2 - Features and Operation
Hold - Preference
Description
The Hold Preference feature allows either System or Exclusive hold as the primary hold on the 
first depression of the HOLD button, depending upon programming. A second depression 
invokes the second hold preference.
Programming Steps
1. Press the HOLD PREF flexible button (FLASH 05, Button #2).
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Exclusive Hold
[1] = System Hold
3....