Vodavi Starplus Triad S Installation Programming Manual

Hot Keypad2-145
Chapter 2 - Features and Operation
System Hold Recall Timer
Description
The System Hold Recall Timer determines the time before a call placed on System Hold recalls 
the station placing the hold. If unanswered by that station, the call recalls the attendant.
The System Hold Recall Timer setting is variable from 000-300 seconds. An entry of 000 
disables the timer and there is no recall.
Programming Steps
1. Press the SYSTEM HOLD RECALL TIMER flexible button (FLASH 01, Button #1). The...

2-146Hunt Groups
Chapter 2 - Features and Operation
Hunt Groups
Description
The system can be programmed for up to 12 Hunt Groups. Each Hunt Group can contain up 
to 8 stations each. Each Hunt Group can be independently arranged to use a pilot hunting or 
station hunting technique. If a station is in DND or is forwarded in any manner, it is 
considered busy.
Programming Steps
1. Press FLASH and dial [30]. The following message displays:
The top left button in the flexible button field is lit for...

Hunt Groups2-147
Chapter 2 - Features and Operation
Station / Pilot / Pilot All Ring -- Hunting Assignments
Description
Pilot Hunting -- Incoming CO, transferred CO, and intercom calls can be directed to a pilot 
number of a hunt group. The system searches sequentially (in the order the extensions were 
entered in the database programming) for an idle station in the group and rings that station. 
Calls directly to stations (by calling the extension number) within the hunt group do not hunt 
but receive...

2-148Hunt Groups
Chapter 2 - Features and Operation
Initialize Hunt Group Parameters
Description
Hunt Group Parameters may be initialized setting all data fields to their original, default 
value.
Programming Steps
1. Press the HUNT GROUPS flexible button (FLASH 80, Button #10). The following message 
displays:
2. Press the HOLD button. A confirmation tone sounds.
Print Hunt Group Parameters
Description
The Print Hunt Group command dumps the entire database as a permanent record which can 
serve as a...

Idle Speaker Mode2-149
Chapter 2 - Features and Operation
Programming Steps
1. Press the HUNT GROUPS flexible button (FLASH 85, Button #11). The following message 
displays:
2. To print data for Hunt Group Parameters, press the HOLD button. The following message 
displays:
When the system finishes sending the requested information to the printer, a 
confirmation tone sounds.
Idle Speaker Mode
Description
The Idle Speaker Mode feature allows you to select whether the first digit dialed is audible 
over...

2-150Intercom
Chapter 2 - Features and Operation
Intercom
Description
The Intercom Button feature provides station users the function of ringing a busy station via 
the intercom without using the Camp On or Executive Override features. This also allows 
stations to place intercom calls on hold. If calls are ringing on intercom buttons and a 
Handsfree call is received, the Handsfree call is allowed and the calls ringing continue with 
muted ringing. Multiple intercom path buttons can be assigned to a...

Intercom2-151
Chapter 2 - Features and Operation
Conditions
» If calls are ringing on intercom buttons and a Handsfree call is received, the Handsfree call 
is allowed and the calls ringing continue with muted ringing.
» Multiple intercom path buttons can be assigned to a single station, however up to five 
internal parties can be placed on hold per station. Music-On-Hold is provided to the 
intercom caller on hold.
» Once an intercom button is set up on the keyset, callers dialing that station always...

2-152Intercom
Chapter 2 - Features and Operation
To answer an Intercom Call:
In the T mode, you hear repeated bursts of intercom tone ringing and the HOLD button 
slow flashes.
Lift the handset or press the ON/OFF button to answer,
-or-
Press the H-T-P button to the H mode to reply.
In the P mode, you hear three bursts of tone and one-way announcement. The calling 
party cannot hear conversations in progress.
Lift the handset or press the ON/OFF button to answer,
-or-
Press the H-T-P button to the H mode...

Intercom2-153
Chapter 2 - Features and Operation
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available 
options. Refer to Table 2-11 on page 2-130.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Incoming Intercom Ringing flash rate is set for Red 120 ipm Flutter (11).
Intercom Hold Button Flash Rate
Description
The Intercom Hold Button flash rate is the rate at which your Hold button flashes when you 
receive an intercom...

2-154Inter-Digit Time-Out
Chapter 2 - Features and Operation
Intercom Transfer
To use Intercom Transfer without DSS Buttons:
1. Receive or make an intercom call.
2. Press the TRANS button. Intercom dial tone sounds.
3. Dial the station.
4. When the second station answers, you are in a supervised transfer mode (first station is 
staged for transfer).
5. Hang up (stations 1 and 2 are connected).
To use Intercom Transfer with DSS Buttons:
1. Receive or make an intercom call using a DSS button.
2. Press the...