Vodavi Starplus Triad S Description Manual

Voicemail Groups (VM)
Voicemail Outpulsing Table
Voicemail Disconnect Table
Programming Steps
iPress the DISCONNECT TABLE 8 flexible button (FLASH 66, Button #9). This table
number is used for the voicemail disconnect signal.
2Enter up to 12 digits used for the disconnect signal, including [+k] and [#I, TRANS button
= pause.
VOICE DIS EMAIL
1
3Press HOLD to save the entry. Confirmation tone is heard and the display now updates.
Description
A disconnect signal can be programmed into the Triad-S system to...

Voicemail Groups (VM)
Voicemail In-Band Features
Voicemail In-Band Features
Programming Steps
IPress FLASH and dial [67]. The following message is shown on the display:
I
VM FEATURES ICID AFWD
VBRK
I
Description
Entries into the Voicemail In-Band Features determines the in-band signaling required for ICID Incoming
ID Digits (forwards incoming CO callers directly to a Stations Voicemail Box), and AFWD Call Forward (lets
voicemail calls, upon reaching a forwarded to VM station, forward back into the...

Voicemail Groups (VM)
Voicemail In-Band Features
the voicemail system (if programmed to ring only at one attendant station). Callers are presented to the main
greeting (not the attendant stations’ mail box) even when ID digits are enabled. By default, ID digits for
-.-.--~~~~~~
G
incoming CO calls is enabled.
y-.- 5- :ir
Voicemail Transfer / Forward
Programming Steps
1Press the CALL FWD flexible button (FLASH 67. Button #2). The following message are
shown on the display phone.
.
;;R;EATURES ICID AFWD
1...

I
8-10Voicemail Groups (VM)
Voicemail Index Table
Description
This feature modifies the operation of voicemail ports when disabled. Broker operation is unavailable when
using supervised transfers to stations. If enabled, the current operation of broker mode during supervised
transfers remains in effect. This means that the call to the station remains as the second party in a broker
mode, If disabled, the VM port disconnects the call to a station and return to the original party. By default,
the VM Broker...

Voicemail Groups (VM)
Voicemail index Table
8-11
1Press the SELECT flexible button (FLASH 68, Button #20).
zEnter a 3-digit Mailbox Table Number (001-255).
&g?+3Press HOLD to save the entry. Confirmation tone is heard and the display now updates
p&and shows the new Mailbox Table Number.
Description
This feature provides an attendant or station user a way to transfer a caller directly into a voicemail box.
Station identification digits can be entered by the transferring party. Using this feature, a caller...

8-12Voicemail Groups (VM)
Voicemail index Table
Issue 
I - December 1998STARPLUS Triad-S System Programming Manual 

. ----
Exception Tables Programming
The STARPLUS Triad-S’” Systems offer a flexible means of applying toll restriction to stations or
individuals. Dialing privileges (or toll restriction) is determined through assignment of station and CO line
Class Of Service (COS). Several types of restriction can be derived simply by programming COS assignments
and CO line access to stations. This may, in some cases, be all that is necessary. However, when a more
complex or specific type of restriction is desired the...

9-2Exception TablesException Tables Programming
The Allow and Deny tables enable entries of either general or specific allow and deny codes such as allowing
all 
[l-800] type calls, and/or denying all [l] + or [O] + calls. The Allow and Deny tables allow a maximum
of 8 digits to be entered as allow or deny digits. This enables entry of certain area codes or office codes that
can specifically be allowed or denied. For example, the code 
[l-555-1212] may be entered in the Deny
Table to deny local toll...

Exception TablesRELATED ITEMS TO TOLL RESTRICTION9-3
A special Do Not Care character (D) may be entered to allow or deny any digit dialed in that digit sequence.
The Triad-S system also offers four special tables (found in the Product Description Manual) that can be
T.r’:,
e---. ::referenced from within the two allow tables. Three of the special tables can be assigned to specific area codes--:

 I  ‘..9-4
Exception Tables
Toll Restriction
The Triad-S system allows up to 5 DTMF receivers for monitoring SLT dialing. If a system has heavy SLT
usage, then toll restriction may inhibit dialing by SLT stations. Two options are available to help alleviate
this problem:
+Shorten the SLT receiver timer [FLASH 011 [Button 121. This frees up DTMF receivers faster, but
may not provide the desired toll restriction for SLT stations.
+Enable LCR and force LCR on SLT stations.
When the LCR database is set up,...