Vodavi Starplus Triad S Description Manual

Least Cost Routing (LCR)
IntroductionSEARCH EXCEPTION
TABLE FOR MATCHFOUNDROUTE ASSIGNED
. FROM~A\~~PTION
NOT
FOUND
?3%%?NOT
FOUNDRESTRICT
TA%~~~R
) FOUND
CALL IS QUEUED ON
L--JLEAST COSTLY
GROUP IN LIST OF
ROUTE ASSIGNEDCO LINE SELECTED
FROM FIRSTAVAILABLE TRUNK
GROUP IN LIST OF
ROUTE ASSIGNED
INSERT/DELETE
TABLE IS USED IF
ASSIGNED WITH
TRUNK GROUPFigure 1 O-l: LCR Flowchart
STARPLUS Triad-S System Programming Manualissue I- December 1998 

IIO-4Least Cost Routing (LCR)
LCR Tables
LCR Tables
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to program here,
enter the programming mode. To program the system for Least Cost Routing:
_., ; ‘._ ._ ,.i/. .. . . . . .
__
1Press FLASH and dial 
[75]. The following message is shown on the display phone:
LCR TABLES
ENTER BUTTON NUMBER
.
2There are eight tables which can be programmed here for LCR (you must also program
LCR Class of Service in...

Least Cost Routing (LCR)
LCR Tables3-DIGIT TABLE
&DIGIT TABLEEXCEPTION
ROUTE LIST
TABLESTABLE
#II %s12 113+#-INSERT 
IDAILY TIMEWEEKLY TIMETOLL
DELETE TABLETABLETABLEINFORMATION
%Ezrm *m%Ezul%:-3-Digit Area 
/ Off ice Code Table
Programming Steps
1Press 3-digit Table flexible button (FLASH 75, Button #I). The following message will be
shown on the display phone:
3 DIGIT ROUTING TABLEENTER L NNN RRY PP HOLD
Where:
L = [0] for Non-Leading 1 (1 not dialed)
[I] for Leading 1 (1 is dialed)
NNN = Area/Office...

IO-6Least Cost Routing (LCR)
LCR Tables
The number of digits to expect entry will aid the system in identifying when the last digit is dialed and to
begin routing the call. This also helps to free SLT DTMF receivers if SLT traffic in the system is heavy. For
international calls, use 00 as number of digits to expect. This causes the system to wait five seconds (or
inter-digit time-out) after user dials last digit before the system accesses a CO Line and dials out.6-Digit Office Code Table
Programming...

Least Cost Routing (LCR)
LCR TablesIO-7
made to a table route those office codes to the specified route list table, An area code may be entered into
more than one 6-digit table with different routes specified.
..:.A
8:.:;$ Exception Code Table
Programming StepsIPress EXCEPTION TABLES flexible button (FLASH 75, Button 
#3). The following
message will be shown on the display phone:
EXCEPTION CODE TABLEENTER S XX RR HOLD
.Where:
S = [0] to remove code from table,
[I] to add code to table
XX = Exception...

IO-8Least Cost Routing (LCR)
LCR TablesWhere:
RR = Route List Table Number 00-15
T = Time Period Route List l-4
G = CO Line Group l-7
DD = Insert/Delete Table reference 00-19 (## for none)
L = LCR Class of Service (LCOS)
zPress the HOLD button to save the entry. Confirmation tone is heard and the display will
now update.
3To enter additional CO Line groups in the same time period route list number,
Dial:[G] [DD] [L] [HOLD]
To enter data for a different time period route list:IPress program FLASH 75,...

Least Cost Routing (LCR)
LCR TablesIO-9
When routing a CO call through LCR, CO Line groups are accessed in sequence so that the first line group
entered represents the least costly (and first selected) and the last line group entered represents the most
: *,,,.,,,‘, ~
e?
costly (and last selected).
+*The Route List table references many other tables when processing a call for routing. First of all, the Daily
start time table is referenced to determined what start time entry should be checked in the...

Least Cost Routing (LCR)
LCR Tables
5
NNNNNYY
c 6NNNNN
NY0
S
J = Cannot Use Line Group
Y = Has Access to Line Group
Table 1 O-l: LCR Class of Service Table
Insert / Delete Table
Programming Steps
1Press INSERT/DELETE TABLE flexible button (FLASH 75, Button #5). The following
message will be shown on the display phone:
IDIGIT INSERT 
/ DELETE
ENTER TT X DDD HOLD
I
zEnter the table information as follows:
Where:
T T = Insert/Delete Table Number 00-19
X = [0] Pre-Delete numbers (first digits dialed in the...

Least Cost Routing (LCR)
LCR TablesIO-II
3Press the HOLD button to save the entry. Confirmation tone is heard and the display
updates.
To add and delete numbers in the same table, enter the different Insertion/Deletion tables in step 1, and
enter 
as separate entries using the same table number. In the Insert Tables for LCR programming:
1Press the TRANS button for a pause.
The 
[a] and [#] digits are allowed as valid digits for inserting digits dialed over the
network.
The 
[%I and [#] are valid entries...

Least Cost Routing (LCR)
LCR Tables
Daily Start Time Table
Programming Steps
1Press the DAILY START flexible button (FLASH 75, Button #6). The following
message displays on the phone:
DAILY START TIME TABLEHHMM HHMM HHMM HHMM HOLD
2Enter times in military format (2400 hours) in succession.
3Press the HOLD button to save the entry. Confirmation tone is heard and the display
updates.
Default times are 0800, 1700,230O (8 AM, 5 PM, and 11 PM), and the fourth time is disabled (####).
To change a Start Time,...