Vodavi Starplus Triad S Description Manual

.
Initialize Database Parameters
Introduction
Initialize Directory Dialing Table ParametersProgramming Steps
IPress the DIRECTORY DIAL TABLE flexible button (FLASH 80, button #9). The
following message displays on the phone:
INITIALIZE DIR - DIAL
PRESS HOLD
2To initialize the Directory Dialing Table Parameters, press the HOLD button.
Confirmation tone is heard.
Description
The Directory Dialing Table Parameters may be initialized setting all data fields to their original, default
values.
Program...

Initialize Database Parameters
Introduction
Initialize Hunt Group ParametersProgramming Steps
1Press the HUNT GROUPS flexible button (FLASH 80, button #IO). The following
message displays on the phone:
.INITIALIZE HUNT GROUP
PRESS HOLD
t
2To initialize the Hunt Group Parameters, press the HOLD button. Confirmation tone is
heard.
Description
Hunt Group Parameters may be initialized setting all data fields to their original, default value
ProgramFlex
FeaturesDefault Value
CodeButtonAfter 
lnitlallza...

Initialize Database Parameters
Introduction
Initialize ACD / UCD Group ParametersProgramming Steps
tPress the ACD* or UCD GROUPS flexible button (FLASH 80, button #Ii). The following
message displays on the phone:
INITIALIZE ACD GROUP
PRESS HOLD
zTo initialize the ACD* or UCD Group Parameters, press the HOLD button. Confirmation
tone is heard.
Description
ACD* or UCD Group Parameters may be initialized setting all data fields to their original, default values,
Program
CodeFlash
Page B
. .
Flex...

:
Initialize Database Parameters
Introduction
Features Program
CodeFlex
ButtonDefault ValueAfter lnltlallzatlonII
I
-lash 61ACD TIMERS:
ACD*/UCD Ring Timer1 60 sec.
1
I=
2
3ACD*/UCD Message Interval Timer
ACD*/UCD No-Answer Recall Timer
ACD*/UCD No-Answer Retry Timer
17ACD* Guaranteed Message Timer
ACD* Ran Announcement Tables1 05 sec.
1  None
-lash 62 1  l-8
-lash 63 IIEvent Trace Disable/Enable
I  Disabled
Trace Port Assignment
58-565:
ACD* Groups (558-565)
Alternate ACD* Group Assignment
ACD* Overflow...

Initialize Database Parameters
IntroductionII-21
Initialize Voicemail Group Parameters
Programming Steps
1Press the VOICE MAIL GROUPS flexible button (FLASH 80, button #12). The following
message displays on the phone:
INITIALIZE VM GROUP
PRESS HOLD2To initialize the VM Group Parameters, press the HOLD button. Confirmation tone is
heard.
Description
VM Group Parameters may be initialized setting all data fields to their original, default values.
ProgramFlex
FeaturesDefault Value
CodeButton
After...

 I11-22Initialize Database Parameters
Introduction
Initialize Verified Account Code Table
Programming Steps
1Press the VERIFIED ACCT CODES flexible button (FLASH 80, button #14). The
following message displays on the phone:
Y
INITIALIZE ACCT CODESPRESS HOLD2To initialize the Verified Account Code Table, press the HOLD button. Confirmation
tone is heard.
Description
The Verified Account Code Table may be initialized setting all data fields to their original, default values,
ProgramFlex
FeaturesDef auk...

Initialize Database Parameters
Introduction
11-23
System Reset
gy

11-24Initialize Database Parameters
Introduction
Issue I- December 7998STARPLUS Triad-S System Programming Manual 

Introduction
Print Database Parameters
Programming Steps
1Press FLASH and dial [85]. The following message displays on the phone:
PRINT DATABASE
ENTER BUTTON NUMBER
Description
This section describes the procedures and steps necessary to print the system database parameters and
various portions of the system. The buttons on the key telephone are defined as shown below when entering
the Print Database Parameters programming area:SYSTEM
CO LINE
STATION
PARAMETERS
ATTRIBUTES
ATTRIBUTESPORT 
- STA/CO
III *n...

Print System Database Parameters
Introduction
Refer to the following figures for examples of the database printouts. Also refer to the following paragraphs
for instructions on printing portions of the database.
Print System Parameters
Programming Steps
1Press the SYSTEM PARAMETERS flexible button (FLASH 85, button #I). The
following message displays on the display phone:
PRINT SYS 
PARAMPRESS HOLD
2To print the System Parameters database, press the HOLD button. The following
message displays on the...