Home > Vodavi > Communications System > Vodavi Starplus Triad S Description Manual

Vodavi Starplus Triad S Description Manual

Here you can view all the pages of manual Vodavi Starplus Triad S Description Manual. The Vodavi manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 641

Least Cost Routing (LCR)
LCR Tables
2300 (11100 pm)Figure 1 O-2: Daily Start Time and Weekly Schedule Tables
Weekly Schedule Table
Programming Steps
1Press the WEEKLY SCHED flexible button (FLASH 75. Button #7). The following
message displays on the phone:
WEEKLY SCHEDULE TABLEENTER D T T T T HOLD
..Where:
D = Day of the Week:
[0] = Monday
[4] = Friday
[I] = Tuesday
[5] = Saturday
[2] = Wednesday[6] = Sunday
[3] = Thursday
T = Time Period Route List (l-4) to use for the time-of-day (based on the Daily...

Page 642

Least Cost Routing (LCR)
LCR Tables
2Press the HOLD button after each complete daily entry. Confirmation tone is heard and
the display updates.
Description
The weekly schedule table determines what Time Period Route list to use within the Route List table. When
a call is placed and ultimately sent to a route list (call is not denied) based on the time of day the call is
placed, the Daily Start Time table selects the time period to reference in the weekly schedule table. The time
period route entered for...

Page 643

::
Least Cost Routing (LCR)
LCR TablesIO-15
aEnter the two-digit Route List number (00-15) for the Route to be referenced in the
Route List table.
3Press the HOLD button after programming the Route number. Confirmation tone is heard
and the display will now update.
4Enable LCR at this point.
Description
This feature adds provisions to the LCR call processing which will allow common call routing for all toll
information calls. 
I-(XXX) 555-1212, (K@ 555-1212,1-555-1212 and 555-1212 calls will all be...

Page 644

 I
IO-16Least Cost Routing (LCR)
LCR Tables
Issue 1 - December 1998STARPLUS Triad-S System Programming Manual 

Page 645

Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to program here,
enter the programming mode. If Database Parameters must be initialized:
1Press FLASH and dial [80]. The following message displays on a display phone:
INITIALIZE DATABASE
ENTER BUTTON NUMBER
.
Description
This section describes the procedures and steps necessary to initialize the system database, returning any
programmed data to its original or default value. This section lets...

Page 646

Initialize Database ParametersIntroductionSYSTEM
PARAMETERS
4k;:EXCEPTION
TABLES
#15DIRECTORY
DIAL TABLE
slg
1113
*117
6121CO LINE
ATTRIBUTES
*lziaSYSTEM SPEED
NUMBERS
#IsHUNT GROUPS
s#-ACCT CODES
%+114STATION
ATTRIBUTESPORT 
- STA/CO
*EcIEl +%DLCR TABLES
ICLID-DIDTABLES
gm *LEil
ACD* OR UCDVOICEMAIL
GROUPS
GROUPS
%a %112
Initialize System Parameters
Programming Steps
1Press the SYSTEM PARAMETERS flexible button (FLASH 80, button #l). The
following message displays on the phone:
.INITIALIZE SYS 
PARAM...

Page 647

Initialize Database Parameters
IntroductionTable 1 l-l: System Parameter Defaults
STARPLUS Triad-S System Programming Manualissue I- December 1998 

Page 648

Initialize Database Parameters
Introduction
Program
Code
-lash 02
-lash 02
-lash 05
T
Flex
ButtonFeaturesDef auk ValueAfter
Initlallza tionADDITIONAL SYSTEM TIMERS
1Repeat Redial Timer
2Attendant Display Timer
3Call Coverage Ring Timer
4Modem Answer T / 0
5Pulse Dial Inter-Digit Timer60 sec.
1 sec.
5 sec.25 sec.
300 ms
6Programmable DTMF Time Operation1 OOms on/l OOmsoff
I
SYSTEM FEATURES 1
1Attendant Override1  Disabled
2Hold Preference
3External Night Ring
4Executive Override Warning Tone
5Page Warning...

Page 649

Initialize Database Parameters
Introduction
Program
Code
-lash 06
Flex
ButtonFeaturesSYSTEMFEATURES
1Privacy Release Tone Option
2Distinctive CO Ringing
3Verified Account Codes
Default ValueAfter
lnltializa tionEnabled
Enabled
Disabled
41  Call Forward Display1  Enabled
5( External Day Ring
IDisabledI
6Overflow Station ForwardDisabled
7Direct Transfer Mode
Enabled
II
a) Station ID Lock) Disabled
9LCR Call ProgressEnabled
10One-Touch Recording Warning Tone
Enabled
11
12Ringback on TransferDisabledTable...

Page 650

Initialize Database Parameters
Introduction
Program
Code
-lash 07
Flash 09
Flash 10
Flex
ButtonFLASH RATESFeaturesDef 
auk ValueAfter
hi tJaliza t/on,t.?;‘;...“.. :., . .. . .L ,... . .‘. .: I’: ’
1Incoming CO Line Ringing
Red 480 ipm flutter
21  Incoming Intercom Ringing
1  Red 120 ipm flutter 1
3Call Forward Button
1  Red Steady On
4I Message Wait/VM Button) Red Steady On
5
6
7
8
9
10
11
12Message 
CallBack - DSS/BLFRed 120 ipm flutter
Do Not Disturb 
- DSS/BLF
Red 60 ipm flash
Auto 
CallBack -...
Start reading Vodavi Starplus Triad S Description Manual

Related Manuals for Vodavi Starplus Triad S Description Manual

All Vodavi manuals