Vodavi Starplus Triad S Description Manual

Uniform Call Distribution (UCD)
UCD Announcement Tables (RAN)7-Q
UCD No-Answer Retry Timer
=;i.
cProgramming Steps
_,. :.:,5’ .k..T,- *--g,.-IPress the NO-ANSWER RETRY TIMER flexible button (FLASH 61, Button #6). The
following message is shown on the display phone:
INO-A;;;ER RETRY000-999I
zEnter the 3-digit value on the dial pad which corresponds to 000-999 seconds.
3Press HOLD to save the entry. Confirmation tone is heard and the display now updates.
Description
When the No-Answer Recall Timer expires,...

7-10Uniform Call Distribution (UCD)
UCD Announcement Tables (RAN)
[2] = SLT Port Interface
Index (port) Number:
[OOl-0121 = Triad-S CO Line Ports
[IOO-1311 = Triad-S SLT Station Ports
Message Time:
000 to 300 seconds
4Press HOLD to save the entry. Confirmation tone is heard and the display now updates.
To clear entries in a Table:
IPress [#] followed by HOLD.
Description
Determines the type, index (port) number and message length for the eight available Recorded
Announcements (RAN). There are eight RAN...

Uniform Call Distribution (UCD)
UCD Announcement Tables (RAN)
Example:
To program a table for CO line port:

7-12Uniform Call Distribution (UCD)
UCD Announcement Tables (RAN)Issue I- November 1998
S TA RPL US Triad-S Sys tern Programming Manual 

.4
.-:.-.1: I,:::.;.s’
-Voicemail Programming
Programming Steps
Enter the programming mode. To program Voicemail Groups:
1Press FLASH and dial [65]. The following message is shown on the display phone.
LlVM 
446 AAA LLL R XxX,XxX,xxx,xxx,xxx,xxx,xxx,xxx
Where:
[G] = Voicemail Group Number (O-7)
[AAA] = Alternate Group (440-447)
[LLL] = Leave Mail Index.
[R] = Retrieve Mail Index from outpulsing table for retrieving messages (O-7)
[XXX] = Voicemail Station Numbers (ports) up to 8 stations maximum.
2The...

8-2Voicemail Groups (VM)
Voicemail Programming
Voicemail or Auto Attendant operation. Voicemail automatically handles unanswered calls. Station user can
then retrieve messages left at their stations. Auto Attendants can handle incoming calls and route callers to
station users without intervention from the systems attendant.
,, .,.., \.L. _: :;:
Direct incoming ring to VoicemaibAuto Attendant groups can be done directly through CO Line Ringing
Assignments. By default, all Voicemail stations are assigned...

Voicemail Groups (VM)
Voicemail Programming8-3
Description
An Alternate Voicemail Group may be programmed so that if all voicemail ports are in use, the call can be
routed to an alternate group. This is useful when more than eight ports are required for voicemail traffic.
Leave Mail Index Entry
Programming StepsIPress the LEAVE flexible button (FLASH 65, Button #IO).
2Enter the 3-digit Leave mail index on the dial pad:
First Digit = Standard Leave Table number (O-7).
Second Digit = Leave Table to utilize...

8-4Voicemail Groups (VM)
Voicemail ProgrammingVM 
446 AAA LLL R XxX,XxX,
xxx,xxx,xxx,xxx,xxx,xxx
.
3Press HOLD to save the entry. Confirmation tone is heard and the display now updates.
To delete a Retrieve Mail Index Entry:
1Press the pound key once [#I, then press HOLD.
Description
The Retrieve Mail Index specifies the outpulsing table where the In-Band digits required to connect a station
user to their own mailbox are stored. By default, Voicemail Group 1 (440) Retrieve Table index is set to 1.For the...

Voicemail Groups (VM)
Voicemail Outpulsing Table8-5
Voicemail Outpulsing Table
,,?$. Voicemail In-Band Signaling
d.,... ‘L- ”i.c -7
Programming Steps
1Press FLASH and dial [66]. The following message is shown on the display phone.
VOICEPRE XXXXXXXXXXXXE
MAIL YSUF XXXXXXXXXXXXEWhere:
y = Table Index (O-7)
X = Entered Digits (O-9, 
#, *, Pauses)
2The TABLE 00 flexible button (Button #I) led is lit. To change tables, press the
appropriate flexible button (Buttons 2-8) and perform the following procedures....

Voicemail Groups (WA)
Voicemail Outpulsing TableTABLE
0TABLE1TABLE2TABLE3
*EiIm +12 913*14TABLE4TABLE5TABLE6TABLE
7
#: %F +em 11_8DISCONNECT
TABLE
1121%122 %a *124
Build a table (0 for example) for any additional digits other than the Station Extension Number (Voicemail
Box Number) needed for a caller to leave a message in a station’s mailbox (Leave). Build another table (1
for example) for any additional digits needed for a mailbox holder to retrieve a message.(Retrieve).
By default:
Table 0Prefix = P7...