Vodavi Starplus Triad S Description Manual

Station Attributes Programming
Page B Introduction4-27
CodeDescriptionCode
Description
570+[XXX]ACD Call Qualifier643Repeat Redial
II
I
579+[XXX] 1ACD Calls in Queue Display1  694Custom Message
571ACD Logout644+[lDX]Mailbox Button (IDX = OOI-255)
I
572+[XXX] ACD Login573ACD Member Status
574ACD Supervisor Help
575+[XXX]ACD Supervisor Logout
576+[XXX]ACD Supervisor Login
577+[XXX]ACD Supervisor Status
607Attendant Available 
/Unavailable645Intercom Button
646+[XXX]Call Coverage (Ringing)
647+[XXX]Call...

4-28Station Attributes Programming
Page B introduction
CodeDescriptionCode
Description
020-099System Speed Bins628OHVO
100-131Triad-S DSS
631Do Not Disturb
566
567
440-447UCDIACD
Available/Unavailable
UCDlACD Calls in Queue
VM Pilot Groups640
CallForward
641Release Key
635
ICLID Unanswered Call
Table 4-3: Flex Button Codes for Remote Programming
Specific buttons may be assigned as unused or locked out. When a button is programmed as unused, the
button may not be programmed by the station user using flex...

Station Attributes Programming
Page 6 introduction
&Button-Digital Keyset Default:STA 100
STA 101LOOP
POOL
*-9 118 % rar--Tl 9# I?0CALL BACK
PICKUP
DNDLINE QUEUE
#6121 e- %+123 sit-
Keyset Mode
Programming Steps
1Press the KEYSET MODE flexible button (FLASH 50, Page B, button #12). The
following message displays:
KEYSET MODEo-4INACTIVE MODE
2Enter a l-digit number to change the mode of a digital terminal:
[0] = Inactive Mode (normal mode without CTI box)
[I] = PC Phone Mode at 4800 baud
[2] = ATD Command...

Station Attributes Programming
Page 6 introduction
Voicemail ID Translation
Programming Steps
IPress the VMID TRANSLATION flexible button (FLASH 50, Page B, button #13). The
following message displays:
VOKXW&L ID0000-9999
zEnter a four-digit VMID number which corresponds to 0000 to 9999.
3Press HOLD to update the table. A confirmation tone is heard and the display updates.
Description
This feature enables programming of the station number sent to the Voice Mail via In-Band integration. By
default, the...

.:.
Station Attributes Programming
Page B Introduction
When a button is assigned as a flexible button [O], the user can program any features or functions on the
buttons to which he has access. When the buttons are programmed with user programmed functions, the
display shows the function assigned to the button.
Flex But-
tonDesignationFlex But-
tonDesignationA[AAA]
ACC
ACPACD Group with Pilot Number
Account Code Enter
W’JIInternal Page with Zone
All Call PageLCRLCR Access
ALI1  Agent LoginI  LP
1...

4-32Station Attributes Programming
Page B Introduction
Flex But-
DesignationFlex But-
tontonDesignationEORExecutive Override
WY1Speed Dial Button with Bin
Number
WNIExternal Page with ZoneSLISupervisor Login
FFWIncoming Transfer CO LineSLOSupervisor Logout
H[ HHH]Hunt Group with Pilot Number
SNRSave Number Redial
HLPAgent HelpSTSSupervisor Status Display
HSTHeadset Mode
U[UUU]UCD Group with Pilot Number
IACInternal All Call PageUNAUniversal Night Answer
V[VVV]VM Group with Pilot Number
w-L1CO Line...

Station Attributes Programming
Page B Introduction
Cordless KTU Feature ButtonProgramming Steps
TO assign FEAT Buttons on the Cordless KTU (CKTU) :
IPress the Cordless Key Flexible Button (Flash 50, Page B, Button #17). The following
message displays:
ICORDLESS KEY BTN00-24xxI
Where XX = the assigned FEAT Button
00 = None
01-24 = Button l-24
Description
If a CKTU is associated with the station, the FEAT Button on the CKTU may be assigned to function as any one
(1) of the 24 Flexible Buttons on the...

4-34Station Attributes Programming
Page B IntroductionIssue I- December 1998
STARPLUS Triad-S System Programming Manual 

Introduction
The ICLID (Incoming Calling Line Identification) feature was added to the STARPLUS TriacMP
System. For this feature to operate properly, it must be activated from the Central Office so the numbers or
name, if available, of the calling party are delivered over the individual tip and ring of the CO lines during the
first silent interval between ringing.
Calling Number / Name Display
This feature is the basic offering of the ICLID service when associated with the Triad-S System. Essentially,...

:
ICLID Route Programming
Introduction
OR
I
xxxxxxxxxxxxxxxxxxxxxxxx
I
If no name is available, supplied from the Central Office or internally from the translation table, the
delivered number is positioned centered in the display as shown above for the 
14 Ns.
An option was added to the Local Number/Name Translation Table to route ICLID or Caller Entered ID
Digits based on a partial compare with the number entered in the translation table.
Incoming Number/Name for SMDR Records
When this feature is...