Vodavi Starplus Triad S Description Manual
Here you can view all the pages of manual Vodavi Starplus Triad S Description Manual. The Vodavi manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 541
Station Attributes Programming Page B Introduction4-17 Station Day Class of Service (COS) Programming Steps IPress the DAY COS flexible button (FLASH 50, Page B. button #2). DAY COS1-61 .The six classes of service are: COS 1 = No restrictions. COS 2 = Table A governs COS 3 = Table B governs COS 4 = Table A and B govern COS 5 = Restricts [0], [I], [*I, [#] dialed as first-digit and places a 7-digit maximum. COS 6 = Intercom Only (no CO line access - will result in 911 block) 2Press HOLD to save the...
Page 542
4-18Station Attributes ProgrammingPage 6 Introduction Description Each station must be assigned a certain COS for Day Mode operation and for Night Mode operation. Class of Service (COS) determines the station’s dialing privileges. By default, all stations are assigned a COS 1 for Day Mode. CO LINE CLASS OF SERVICE1 I2345 UnrestrictedUnrestricted UnrestrictedCannedUnrestricted Restricted* A--- Table A T 2’Table AUnrestrictedCanned Unrestricted Restricted* I -70 3Table BUnrestrictedTable BCanned...
Page 543
Station Attributes Programming Page 8 IntroductionCOS 6 = Intercom Only (no CO line access - will result in 911 block) zPress HOLD to save the entry. A confirmation tone is heard and the display updates. Description Each station must be assigned a COS for Night Mode operation. The Night COS goes into affect when the system is manually or automatically placed into Night Mode. This prevents misuse of phones after hours. Class of Service (COS) determines the station’s dialing privileges. By default, all...
Page 544
4-20Station Attributes Programming Page B Introduction Pickup Group(s) Programming Steps IPress the GROUP PICKUP flexible button (FLASH 50, Page B, button #5). Thefollowing message displays: PICKUP GROUPSo-4 1 1 2Enter a 1-4 digit number to program pickup groups. [0] = No Group [I] = Group 1 [2] = Group 2 [3] = Group 3 [4] = Group 4 3Press HOLD to save the entry. A confirmation tone is heard and the display updates, Description Stations are assigned to pick-up groups. Stations can be in any combination...
Page 545
Station Attributes Programming Page I3 Introduction 4-21 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description c-?@Stations are assigned to internal paging zones. A station can be in any or all zones or in no zone at all. All Call is all page zones combined. If a station is not in an internal zone, it is excluded from all call pages. Stations not assigned to a page group can make page announcements if allowed in station programming. Stations can be assigned to a...
Page 546
4-22Station Attributes Programming Page B Introduction Forward - Station), or a station in DND, the incoming CO Line bypasses that station and forwards to the next in the chain. If that station is the last in the chain, the call forwards no further and continues to ring at that station until answered or terminated. Chainable Preset Call Forwarding forces the incoming CO Line to ring at each station preassigned in the database for the Preset Forward Ring Timer [FLASH 011 [Button 51, specified in the...
Page 547
Station Attributes Programming Page B Introduction4-23 LCR Class of Service (COS) Programming Steps 1Press the LCR COS flexible button (FLASH 50, Page B, button #Q). The following message displays: LCROCLASS OF SERVICEO-6 2Enter a 1 -digit number (O-6) to correspond to the LCR Class of Service desired. 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description Stations can be given a class of service assignment for Least Cost Routing. The range is between 0-6, with...
Page 548
4-24Station Attributes Programming Page B Introduction Description This lets a key station user automatically have a flex button selected when going off-hook or when pressing the ON/OFF button, An SLT user may have a particular CO line or a CO line group selected automatically when going off-hook. This may be established in programming so that key station users can select and/or change their off-hook preference through the use of a dial code [691] + BB (01-24). Dialing [691] +00 disables Off-Hook...
Page 549
Station Attributes Programming Page B Introduction4-25 To assign a button as a Flexible button (user programmable): IEnter [BB], [0], [HOLD]. FZ-‘-: Y.,When a button is assigned as a flexible button [0], the user can program any features or functions on the-:L‘ :..zz-SZbuttons to which they have access. To assign a button as a CO Line button:IEnter [BB], [I], [LLL], [HOLD] Where: LLL = CO Line 001-012 Example: E: 003HOLD 00201 1 001 I I IButton CO CO Number Code Line Buttons assigned as specific CO lines...
Page 550
4-26Station Attributes ProgrammingPage 6 introduction Example: 201HOLD I1 I ButtonPoolLine Number Code Group Some or all outside CO lines may be grouped together and accessed via a POOL button for the purpose of placing an outgoing CO call. Pressing this button accesses the highest numbered unused CO line in that CO line group. To assign a button as a Feature button (admin programmable): IEnter [BB], [4], [XXX], [HOLD] This feature enables flexible buttons to be programmed from a remote location, Range...