Vodavi Starplus Triad S Description Manual

.,.
ICLID Route Programming
ICLID Ringing Assignments4. Delete this table entry.
5. Exit table review function.
6. Step to previous table entry.
7. Call BackFLASH
ON/OFF
TRANSFERSPEED
ICLID Ringing Assignments
Programming Steps
If ICLID Ringing Assignments must be assigned or changed:
iPress FLASH and dial [43]. The following message is shown on the display phone:
ROUTE 000 XXXY
c.Where:
000 = Route Number (000-252)
XXX = Ringing Destination
Y = Ringing Type
2Press the RING ASSIGNMENT flexible button...

ICLID Route Programming
ICLID Ringing Assignments
[2] = Night Ring [N]
[3] = Day/Night Ring [DN]
[4] = Special Only [S]
[5] = Day/Special [DS]
[6] = Night/Special [NS]
[7] = All Modes [Day/Night/Special [A]
I
Description
ICLID Ringing Assignments let you change the ring assignment based on the incoming number received.
This feature permits you to select from 252 ringing routes for each entry in the name to number translation
table and DID table. For example, this feature could be used to re-route...

ICLID Route Programming
ICLID Ringing Assignments
View ICLID Ringing AssignmentsProgramming Steps
If ICLID Ringing Assignments must be viewed:
IPress FLASH 43, button #17 to display ring assignments. Assignments are displayed in
sets of six, up to the number programmed. Press FLASH 43, button 
#I7 additional times
to cycle to the next group of six ring assignments.
IROUTE 000 DOORR OOORR
DDDRR DDDRR DDDRR DDDRRIWhere:
DDD = Destination
RR:[0] = No Ring
[D] = Day Ring
[N] = Night Ring
[DN] = Day/Night...

5-6ICLID Route Programming
ICLID Features
To select a different Route:
1Press the SELECT ROUTE NUMBER flexible button (FLASH 43, button #20) to select
the desired route number.

 I  --ICLID Route Programming5-7
ICLID Features
When entering the ICLID features programming area the buttons on the digital terminal are defined as
shown below:ENABLE 
/DISABLENAMEBAUD RATEPORT
#Eixxl %#iIz3al *o %14
Enable / Disable
Programming Steps
IPress the DISABLE/ENABLE flexible button (FLASH 56, button #I).
zEnter a l-digit value on the dial pad to enable/disable this feature.
[0] = Disabled
[I] = Enabled
3Press HOLD to save the entry. A confirmation tone is heard.
Description
The ICLID...

::
I
5-8ICLID Route Programming
ICLID Features
Baud Rate Display
Programming Steps
The ICLID baud rate is programmed using Flash 15 baud rate assignments. The LCD displays the current
baud rate based on which number is assigned to the ICLID Port number.
FLASH 56, button #3 returns an error tone when pressed.
Description
The Triad-S system can provide ICLID input on the standard RS-232C on the optional MISU. The baud rate
is displayed as 150, 300,600, 1200, 2400, 4800, or 
9600 baud.
Port Assignment...

c
.$-$;t$
“.“’ ACD Group Programming
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to program here,
enter the programming mode. If ACD Groups must be assigned:
1Press FLASH and dial [60]. The following message displays:
ACDSXXA ALT OVR ANSUPAAA BBB CCCC DDD
Where:
[5Xx] = ACD Group Number (550457)
[A] = Page A Parameters
[AAA] = Alternate ACD Group Assignment
[BBB] = ACD Overflow Assignment
[CCCC] = ACD Announcement Tables
[DDD] = ACD Supervisor...

.  .
6-2Automatic Call Distribution (ACD)
ACD Group ProgrammingACD GROUP 550ACD GROUP 551
ACD GROUP 552 ACD GROUP 553
+km*L2 %13 #kKEACD GROUP 554ACD GROUP 555
ACD GROUP 
550ACD GROUP 557
*- +kn *i s&i;ALTERNATIVEACD 
OVER-ANNOUNCMENT
ACD SUPV
ACD GROUPFLOW ASSIGNTABLES
PROGRAMMING
*- *110 %D *mACD WRAP-UP
CIQTIMERTHRESHOLD
%+m%+n %115 %116
DISPLK; STAS SELECT PAGE A DISPLc6STAS
*m #ki?iKzKl% 119 #k I:1
#D%a %a #124
Alternate ACD Group Assignment
Programming Steps
To program an alternate group:
1Press...

Automatic Call Distribution (ACD)
ACD Group Programming
ACD Overflow Station Assignment
Programming Steps
To program ACD Overflow station:
IPress the OVERFLOW ASSIGN flexible button (FLASH 60, button #IO).
2Enter a 3-digit station number to designate the ACD Groups overflow station.
c
ACD5XXA ALT OVR ANSUPAAA BBB CCCC DDD
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
When an overflow station is assigned, callers that remain in queue for a specified...

I6-4
Automatic Call Distribution (ACD)
ACD Group Programming
+:*An entry of [ 11, [2], [3] = Announcement Table 1 provides the Guaranteed Message upon initially
answering the call, Announcement Table 2 provides a primary message and Announcement Table 
3
provides a secondary message.
An entry of 
[8], [ 11, [2] = Announcement Table 8 provides the Guaranteed Message upon initially+
answering the call, Announcement Table 1 provides a primary message and Announcement Table 2
provides a secondary message....