Home > Vodavi > Communications System > Vodavi Starplus Triad S Description Manual

Vodavi Starplus Triad S Description Manual

Here you can view all the pages of manual Vodavi Starplus Triad S Description Manual. The Vodavi manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 671

Print System Database Parameters
Introduction12-3
PRINTING SYS 
PARAMadm>SYSTEM PARAMETERS______-_---------Eng. Ver. 
1.31-1EFBSYS HOLD RECALL
60EXC HOLD RECALL
180ATND RECALL TIMER1TRANSFER RECALL
45PRESET FWD TIMER
10CALL FWD NO ANS15PAUSE TIMER
2CALL PARK TIMER
180CONFERENCE TIMER10PAGING TIMEOUT
15CO RING DETECT
3SLT RCVR TIMER20M/W TONE TIMER0HOOK SWITCH TIME
10HOOK SWT BOUNCE10SMDR CALL QUAL
30AUTO CALL BACK3REMINDER RING
0RELEASE GUARD3INTERDIGIT T/O
5RPT REDIAL60ATTENDANT DISPLAY
1CALL COVERAGE...

Page 672

12-4Print System Database Parameters
IntroductionMUSIC CHANNEL 
13. .81 CO - ##it ### ### #tATTENDANT STATIONS
100 ### 
###F 4
08001700s 5
#+I######S 6########DIAL PULSE 
- 60/40 10 PPS
DATE 
& TIME FORMAT
MM/DD/YY, 12 HOURS
PBX DIALING CODES
## ## ## ## ##
EXECUTIVE/SECRETARY PAIRINGS
1=######
2 =######
3 =
######
4 =######ON BOARD RELAY RELAY ASSIGNMENTS
NONE NONE
I/O BAUD RATE
-------------
Port1 = 9600
Port2 = 9600
Port 3 = 9600
Port 4 = 9600
ACCESS CODE
1 DISA ACCESS
1002 ADMIN PASSWORD3226SDR TPE...

Page 673

.~.
Print System Database Parameters12-5
IntroductionPrint CO Line Attributes
~~~ Programming Steps
G=..I.:, :’
. . ._...IPress the CO LINE ATTRIBUTES flexible button (FLASH 85, button #2). The following
message displays on the display phone:
PRINT CO LINES
PRESS HOLD
2To print the data for ALL CO Lines, press the HOLD button. To print CO Line data for a
specified CO Line Range, enter 6 digits to specify the CO Line 
.Range (3 digits for the
first line within the range and 3 digits for the last line in...

Page 674

12-6Print System Database Parameters
Introduction
Refer to 
Figure 12-Z: CO Li?ze Attributes for an example of the CO Line Attributes database printout.CO LINE ATTRIBUTES
-_.__....--..--..-
co 001DIAL 
PULSE/DTMF DTMF
PBX/CO co
UNIVERSAL NIGHT ANS ENABLED
DISA TRK TO TRK ENABLED
PRIVACY ENABLED
LOOOP SUPERVISION 4
DISA TYPE NONE
LINE GROUP 1
CLASS OF SERVICE 
- 1
LINE IDENTIFICATION LINE 001
CO DIRECTION 
- INCOMING-OUTGOING
RING ASSIGNMENTS
1OOAT-l SIGNAL TYPE 
- LOOP START
T-l 
RINGBACK ENABLED
T-l...

Page 675

Print System Database Parameters
Introduction
12-7
Print Station Attributes
Programming StepsPress the STATION ATTRIBUTES flexible button (FLASH 85, button 
#3). The following
message displays on the display phone:
PRINT STATIONS
PRESS HOLDTo print data for all stations, press the HOLD button. To print Station data for a specified
Station Range, enter six digits to specify the Station range (three digits for the first
station within the range and three digits for the last station in the range):
[IOO-1311...

Page 676

12-8Print System Database Parameters
IntroductionSTATION ATTRIBUTES
________.__--.....
STA 100PAGE ACCESS ENABLED
DO NOT DISTURB ENABLED
CONFERENCE ENABLED
EXEC OVERRIDE DISABLED
PRIVACY ENABLED
SYSTEM SPEED ENABLED
LINE QUEUING ENABLED
PREF LINE ANSWER DISABLED
OFF HOOK VOICE OVER DISABLED
CALL FORWARD ENABLED
FORCE LCR DISABLED
ACD SUPV BARGE IN DISABLED
EXEC OVERRIDE BLOCK DISABLED
COC RING OPTIONS MUTED RING
NAME AT IDLE LCD EXT NUMBER
STATION ID 
KEYSET
DAY COS 1NIGHT COS 1
SPEAKERPHONE FULL...

Page 677

Print System Database Parameters
IntroductionThe button printout for 
the 8-button keyset displays u/l flexible buttons
and fixed buttons the same as a 
24-button keyset.Print CO 
/ Station Port Parameters
Programming Steps
IPress the PORT-STA/CO flexible button (FLASH 85, button #4). The following
message displays on the display phone:
PRINT PORT 
- STA / COPRESS HOLD
t
2To print the CO/Station Port parameters, press the HOLD button. The following
message displays on the display phone:
PRINTING PORT 
-...

Page 678

Print System Database Parameters
Introduction
Print Exception Tables
Programming Steps_-.. ..,“
1Press the EXCEPT TABLES flexible button (FLASH 85, button #5). The following‘~~%~~message displays on the display phone:
I
PRINT EX TABLES
PRESS HOLD
I
2To print the Except Tables, press the HOLD button. The following message displays on
the display phone:
PPRINTING EX TABLES
When the system finishes sending the requested information to the printer, a confirmation tone is heard.
Description
This command dumps...

Page 679

Print System Database Parameters
Introduction
r-1LLOW TABLE ASPECIAL TABLE 1 AREA CODE._-----------
3111ALLOWEDOFFICECODES
3212
3313
1414
3515
SPECIALTABLE2 AREACODE
3616
3717ALLOWEDOFFICECODES
3818
3919
1020SPECIAL TABLE 3 AREA CODE
__--.-.._--._.__--....~-~DENY TABLE AALLOWED OFFICE CODES
0106
0207
0308
SPECIALTABLE4 HOMEAREACODE
.LLOWED OFFICE CODES 04 09
05 10AALLOW TABLE B
01 11
02 1203 13
04 14
05 15
06 16
07 17
08 18
09 19
10 20DENY TABLE B
.._-..-.-...
01 0602 07
03 08
04 09
05 10
Figure 12-5:...

Page 680

Print System Database Parameters
Introduction
Print System Speed Numbers
Programming Steps
1Press the SYSTEM SPEED flexible button (FLASH 85, button #8). The following
message displays on the display phone:
PRINT SYS SPEED NO
PRESS HOLO
2To print the System Speed bins, press the HOLD button. The following displays on the
display phone:
I
PRINTING SYS SPEED NO
I
When the system finishes sending the requested information to the printer, a confirmation tone is heard.
Description
This command dumps the...
Start reading Vodavi Starplus Triad S Description Manual

Related Manuals for Vodavi Starplus Triad S Description Manual

All Vodavi manuals