Vodavi Starplus Triad S Description Manual

System Parameters ProgrammingProgrammable Flash RatesINC CO RING
INC ICW RINGCALL FORWARDMSG WAIT/VMBTN
BTN
*n %a%13 +%nMSG CBCK
DND DSS/BLFAUTO CBCK
UCD UNAVL
DSS/BLFDSS/BLFDSS/BLF
%+- 116 +#rT---ul2#18TRANSFER CORECALL COQUEUED CO
EXCLUSIVE
RINGRING
RINGHOLD
* lg +#k 110 I In+#nSYSTEM HOLDIN USE HOLDCAMP-ON BTNCALLBACK BTN
%+113*-+%- *mLINE QUEUE BTNDND BTNICM HOLD BTN
%+- %+- #Fir-i-lse 130Red LED Flash Rates
-
00
0102
03
04
05
06
07
08
09
IO
11
12
13
14
-Off
15Steady On
16
30 ipm Flash1760 ipm Flash...

 I2-40System Parameters Programming
Programmable Flash Rates
Incoming CO Line Ringing
Programming Steps_.,cT:.ze>;p:.>:q I>
1Press the INC CO RING flexible button (FLASH 07. button #I). The following message“?‘..-L..-
displays:
INC CO RING00-28
RED 480 IPM FLUTTER
zEnter a 2-digit value on the dial pad to correspond to one of the 29 available options.
Refer to the flash rate table.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
The Incoming CO Line...

System Parameters Programming
Programmable Flash Rates
2-41
Call Forward Button
*-.-.
c-
Programming Steps,:-.:a-‘:..::~T~CYZ-1Press the CALL FORWARD BTN flexible button (FLASH 07. button #3). The following
message displays:
CALL FORWARD BTN00-28
RED STEADY ON
zEnter a 2-digit value on the dial pad to correspond to one of the 29 available options.
Refer to flash rate table.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
The Call Forward Button flash rate...

2-42System Parameters Programming
Programmable Flash Rates
identified in the flash rate table. This enables the programmer to customize the key system configuration to
desired flash rates. By default, Message 
Wait/I’M Button flash rate is set for a Red Steady On (01).
The fixed message button should not be used US u Voice Mail button.
Message Callback - DSS / BLF
Programming Steps
1Press the MSG CBCK - DSS/BLF flexible button (FLASH 07, button #5). The following
message displays:
MSG CBCK DSS /...

.:-.
System Parameters Programming
Programmable Flash Rates2-43
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
c$$The Do Not Disturb DSS/BLF flash rate is the rate at which a DSS button of a station flashes when you are in
a Do Not Disturb mode. This flash rate can be programmed to 
29 different options identified in the flash rate
table. This enables the programmer to customize the key system configuration to desired flash rates. By
default, Do Not...

2-44System Parameters Programming
Programmable Flash Rates
2Enter a 2-digit value on the dial pad to correspond to one of the 29 available options.
Refer to flash rate table.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
The UCD Available/Unavailable DSS/BLF flash rate is the rate at which a DSS appearance for a station in
ACD/UCD Unavailable mode flashes. This flash rate can be programmed to 29 different options identified in
the flash rate table. This...

System Parameters Programming
Programmable Flash Rates2-45
Recall CO Ringing
f
Programming Stepss:.%.;‘.: .L’.‘.-. c’‘zy1Press the RECALL CO RING flexible button (FLASH 07, button #lo). The following
message displays:
I
RECALL CO RING00-28RED 480 IPM FLUTTERI
2Enter a 2-digit value on the dial pad to correspond to one of the 29 available options.
Refer to flash rate table.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates
Description
The Recall CO Ringing flash rate is...

;._-2-46
System Parameters Programming
Programmable Flash Rates
Exclusive Hold
Programming Steps
1Press the EXCLUSIVE HOLD flexible button (FLASH 07, button #12). The following
message displays:
EXCLUSIVE HOLD00-28
GREEN 120 IPM FLASH
zEnter a 2-digit value on the dial pad to correspond to one of the 29 available options.
Refer to flash rate table.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
The Exclusive Hold flash rate is the rate at which a CO Line...

.:. .
System Parameters Programming
Programmable Flash Rates2-47
In-Use Hold (I-Hold)
..,?.?%
cProgramming StepsL.... ~.,F.7 . . . -.-g:;1Press the IN USE HOLD flexible button (FLASH 07, button #14). The following message
displays:
I
IN-USE HOLD00-28
GREEN 60 IPM FLASH
\
.sEnter a 2-digit value on the dial pad to correspond to one of the 29 available options.
Refer to flash rate table.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
.’‘\
The In Use Hold...

.:
I2-48
System Parameters Programming
Programmable Flash Rates
Callback Button
Programming Steps
IPress the CALL BACK BTN flexible button (FLASH 07, button #16). The following
message displays:
CALL BACK BTN00-28
RED 120 IPM FLASH
2Enter a 2-digit value on the dial pad to correspond to one of the 29 available options.
Refer to flash rate table.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
The Call Back Button flash rate is the rate at which the Call...