Vodavi Starplus Triad S Description Manual

System Parameters Programming
System Features 2 Programming[I] = Enabled
CALL QUALIFIER TONEo-1DISABLED
3Press HOLD to save the entry. A confirmation tone is heard.
Description
This feature is associated with the ACD Call Qualifier code and determines if a confirmation tone is heard
after the ACD Call Qualifier code is dialed. If programmed, the confirmation tone is heard through the key set
speaker. This feature provides up to four digits for the ACD SMDR reporting functions that are compatible
with the...

2-30System Parameters Programming
System Features 2 ProgrammingPRIVACY
RELEASE TONE
*llEXT DAY
RINGINGCO RING TONEVERIFIED ACCT
CODES
+- *rs--iq
ACD/UCDOVERFLOWDIRECT
STA FWDTRANSFERCALL FWD
DISPLAY
STATUS
*EzRlSTATION ID
LOCK
LCR CALL
PROGRESSONE-TOUCH
RCD WARNING
RINGBACK ON
TRANSFER
*ill17$1
16HI
12074
VI
ProgramFlex
FeatureDefault
CodeButton
(after initialization)FLASH 06
r
1Privacy Release Tone
Enabled
2CO Ring Tone
Enabled
3Verified Account Codes
Disabled
4Call Forward Display Status
Enabled...

System Parameters ProgrammingSystem Features 2 Programming2-31
Privacy Release Tone Option
Programming Steps
2Press the PRIVACY RELEASE TONE flexible button (FLASH 06, button #l). The
following message displays:
BARGEN;iLF;RN TONEO-l
sEnter a l-digit value on the dial pad to enable or disable the conference tone.
[ 0 ] = Disabled[I] = Enabled
4Press HOLD to save the entry. A confirmation tone is heard.
Display stations continue to receive the CONFERENCE display regardless
of the warning tone setting....

2-32System Parameters Programming
System Features 2 Programming
Distinctive CO Ringing
Programming Steps
iPress the CO RING TONE flexible button (FLASH 06, button #2). The following
message displays:
I
CO R&%T;~ESO-l
I
2Enter a l-digit value on the dial pad to enable/disable the tone ring signal.
[0] = Disabled
[I] = Enabled
3Press HOLD to save the entry. A confirmation tone is heard.
Description
The tone ring signal that notifies stations of an incoming call can be changed in administrative
programming...

System Parameters Programming
System Features 2 Programming2-33
I
Description
The Verified Account Code/Traveling Class of Service (COS) feature provides tracking of specific calls by
-cc..- :x.:‘-.c--v1.-.z’:entering a verified, variable length (up to 12-digits) identifier. Each account code can be assigned a day and
night Class-of-Service for determining the dialing privileges allowed by that account code. This lets users
override a restricted station. If the dialed account code matches the Verified...

2-34System Parameters Programming
System Features 2 Programming
External Day Ring
Programming Steps
iPress the EXT DAY RINGING flexible button (FLASH 06, button #5). The following
message displays:
I
EXTERNAL DAY RINGo-1
DISABLEDI
2Enter a l-digit value on the dial pad to enable/disable the use of external day ring
option.
[0] = Disabled
[l] = Enabled
3Press HOLD to save the entry. A confirmation tone is heard.
Description
The system can be programmed so CO lines marked for UDA provides ringing out of...

System Parameters Programming
System Features 2 Programming2-35
ACD/UCD Overflow station can Busy/No-Answer forward to Voice Mail Groups, ACD/UCD Groups, Hunt
Groups and stations. If the 
ACD/LJCD Overflow station is busy or does not answer before the no-answer call
timer expires, the 
ACD/UCD call forwards to the destination, By default, this feature is disabled,
Direct Transfer Mode
Programming Steps
1Press the DIRECT TRANSFER flexible button (FLASH 06. button #7). The following
message displays:
I...

 I:..2-36
System Parameters Programming
System Features 2 Programming
Description
This feature enables the installer/programmer to lock the station ID of all extensions on the system. It also
prevents the loss of station programming that results when a different station type is plugged into a port
already designated as another station type. This feature is programmed on a system-wide basis. By default,
the Station ID Lock feature is disabled.
The proper procedure(s) for changing the Station ID with the...

System Parameters Programming
System Features 2 Programming2-37
One-Touch Recording Warn Tone
Programming StepsPress the ONE-TOUCH RCD WARNING TONE flexible button (FLASH 06, button #IO).
The following message displays:
.
RECORDING WARN TONEO-lENABLED
\
2Enter a l-digit value on the dial pad to enable/disable the use of this feature.
[0] = Disabled
[I] = Enabled
3Press HOLD to save the entry. A confirmation tone is heard.
Description
This feature lets the installer enable/disable the One-Touch Recording...

: --..-..2-38
System Parameters Programming
Programmable Flash Rates
Description
This feature provides on a system-wide basis music on hold or ringback tone to the CO caller when CO calls
are transferred. Callers currently hear music. By default, the 
Ringback on Transfer feature is disabled.
Programmable Flash Rates
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to program here,
enter the programming mode.
1Press FLASH and dial [07]. The...