Vodavi Starplus Triad S Description Manual

Customer Database Programming
Database Upload/Download Routine1-25
3This displays the Send XMODEM screen on the PC monitor. Enter a path and file name
for the database file and press  and the desired file is uploaded to the system.
Send XMODEM
Please enter filename:
4A Confirmation tone is heard after the uploaded is complete and you are returned to the
ADM> prompt.
5Enter an M at the ADM> prompt and press .
adm>m
exiting admin...DATE: 
12/01/98TIME: 15:41:04
exiting maintenance utility...
sOn the PC,...

Customer Database Programming
Database Upload/Download RoutineIssue I- December 1998
STARPLUS Triad-S System Programming Manual 

:
Programming Steps
If the system is in the programming mode, continue using the program codes. If starting to program here,
enter the programming mode. Refer to Chapter 1: Customer Database Programming.
IPress FLASH and dial [Ol]. The following message displays:
SYSTEM TIMERS
ENTER BUTTON NUMBER
.
Description
This section describes the procedures and steps to program system timers in the System Timers
programming area. The buttons on the digital terminal are illustrated on the following page:
issue I-...

System Parameters Programming
System TimersSYSTEMHOLD
RECALL
*llPRESET
FORWARD
+-
CONFlDlSATIMER
119MSG WAIT
REMINDER
*113AUTO CALL
BACK TIMER
4#-EXCL HOLD
ATTENDANT
RECALLRECALL
%l?x2iTl #izKEElCALL FWD
NO/ANSWERPAUSE TIMER
%- *mPAGINGCO RING
TIMEOUTDETECT
*- 4#nHOOK FLASHHOOK FLASH
DEBOUNCE
%+- *115REMINDERRELEASE GUARD
RINGTIMERTRANSFER
RECALL
$14CALL PARK
TIMER
*m
DISAISLTRECEIVER
9112SMDR CALL
QUALIFICATION
4kEiEKaINTER-DIGIT
TIMEOUT
%k-Program Flex
FeatureDefault
CodeButton
(after...

System Parameters Programming
System Timers2-3
System Hold Recall Timer
Programming StepsIPress the SYSTEM HOLD RECALL TIMER flexible button(FLASH 01, button 1). The
following message displays:
SYS HOLD RECALL000-300
060
2Enter a 3-digit timer value on the dial pad that corresponds to 000-300 seconds.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
This timer determines the time before a call placed on System Hold recalls the station placing the hold, If...

2-4
‘-: :..-.
System Parameters Programming
System Timers
Attendant Recall Timer
Programming Steps
1Press the ATTENDANT RECALL TIMER flexible button (FLASH 01, button #3). The
following message displays:
ATND RECALL TIMER00-6001
6
zEnter a 2-digit timer value on the dial pad that corresponds to 00-60 minutes.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
This timer determines the time a recalling call rings at the attendant station(s) before the system...

System Parameters Programming
System Timers
2-5
Preset Forward Timer
_.‘, Programming Steps
e
5. yi;....:_,. 1e.; :.;:’1Press the PRESET FORWARD TIMER flexible button (FLASH 01, button #5). The
following message displays:
I
PRESET FWD TIMER00-9910I
2Enter a 2-digit timer value on the dial pad that corresponds to 01-99 seconds.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
This timer determines the time an outside line rings before being forwarded to a...

 ISystem Parameters Programming
System Timers
Description
This timer is used when a station in the system specifies that no answer calls be forwarded to another
station. The timer determines how long an intercom or transferred call rings before it is considered a no-
answer call. The call then forwards to the designated station for handling. By default, the Call Forward
No/Answer Timer is set for 15 seconds and is variable from 
000-600 seconds.
lnifiul incoming CO lines follow the Preset Call Forward...

System Parameters Programming
System Timers
2-7
Call Park Recall Timer
in-., Programming Steps:: ”&ITIPress the CALL PARK RECALL TIMER flexible button (FLASH 01, button #8). The
following message displays:
CALL PARK TIMER000-600180
2Enter a 3-digit timer value on the dial pad that corresponds to 001-600 seconds.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
This timer determines the time before a call placed in a call park location recalls the station...

2-8System Parameters Programming
System Timers
Description
This timer determines the time an unsupervised conference can continue after the initiator of the
conference has exited. By default, the 
Conference/DISA Timer is set at 10 minutes and is variable from Ol-
99 minutes. A 00 entry disables the timer and no automatic disconnect occurs.The Conference Timer also allows the system 
administrator to control the
time a 
DISA caller is allowed after establishing o Trunk-to- Trunk call. At
the expiration...