Vodavi Starplus Triad S Description Manual
Here you can view all the pages of manual Vodavi Starplus Triad S Description Manual. The Vodavi manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 431
System Parameters Programming System Timers CO Ring Detect Timer ,f?--, eProgramming Steps _.y: 7.:2:-1Press the CO RING DETECT TIMER flexible button(FLASH 01, button #ll). The following message displays: CO RING DETECT2-93 2Enter a l-digit timer value on the dial pad that corresponds to 2-9 (200 ms to 900 ms). 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description This timer controls the time necessary to detect an outside line ringing into the system. By...
Page 432
System Parameters Programming System Timers Message Wait Reminder Tone Programming StepsIPress the MESSAGE WAIT REMINDER TONE flexible button(FLASH 01, button #13).The following message displays: M/WO;;NE TIMERooo- 104 b 2Enter a 3-digit timer value on the dial pad that corresponds to 000-104 minutes. 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description This timer determines the time between repeated reminder tones to a key telephone with a message waiting....
Page 433
System Parameters Programming System Timers considered a Hook Flash (transfer) request. Refer to Figure 2-l. By default, the SLT Hook Flash Timer is set at 10 (one second) and is variable from 0.5-2.0 seconds. Some Single Line telephones have a fixed or programmable Flash Timer(Flash or Tap button). This Hook Switch Timer must be set longer than theSL T Flash Timer to allow Hook Flash transfer. SLT Hook Flash Debounce Timer Programming Steps 1Press the SLT HOOK FLASH DEBOUNCE TIMER flexible button...
Page 434
System Parameters Programming System Timers System Response Hook Switch Bounce Timer 0.l.2.3.4.5.6.7.8.91.O1.52.0 e= programmable rangeTIME(in seconds)Figure 2-l: Hook Switch Activity SMDR Call Qualification Timer Programming Steps 1Press the SMDR CALL QUAL TIMER flexible button(FLASH 01, button #16). The following message displays: I SMDR CALL QUAL00-6030I zEnter a 2-digit timer value on the dial pad that corresponds to 00-60 seconds in 1 second increments. 3Press HOLD to save the entry. A confirmation...
Page 435
System Parameters Programming System Timers 2-13 Automatic Call Back Timer Programming Steps 1Press the AUTO CALL BACK TIMER flexible button(FLASH 01, button #17). The following message displays: AUTO CALL BACK00-9903 * 2Enter a Z-digit timer value on the dial pad that corresponds to 00-99 seconds in 1 second increments. 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description This feature invokes a call back anytime a user listens to busy tone for a programmable...
Page 436
2-14System Parameters Programming System Timers the user receives another ring burst. When the key set user ends the existing call, ringing for the CO call reverts to normal ringing. By default, the Reminder Ring Timer is set to 00 second and is variable from OO- 99 seconds in 1 second increments. Release Guard Timer Programming Steps 1Press the RELEASE GUARD TIMER flexible button (FLASH 01, button #19). The following message displays: I RELEASE GUARD01-5003I 2Enter a 2-digit timer value on the dial pad...
Page 437
System Parameters ProgrammingAdditional System Timers 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description This feature provides inter-digit time-out programming on a system-wide basis and applies to intercom and LCR calls. DISA, DID. TIE inter-digit time-outs remain unaffected by this timer. By default, the Inter-Digit Time-out is set for 5 seconds, and is variable from l-99 seconds. Additional System Timers Programming Steps If the system is in the...
Page 438
2-16System Parameters Programming Additional System TimersSYSTEM REDIALATD DISPLAYCALL CVRG MODEM TIMER TIMERRING TIMER ANSWER T/O #E%lzi!zl %lzcLizl +Em PULSE DIAL I/ODTMF TIME TIMEROPERATION #15 #LLic2a%17 %D *: *- #+n #kKE ProgramFlex FeatureDef auk CodeButton (after initialization)Additional System Timers: FLASH 02 1Repeat Redial Timer 060 seconds 2ATD Display Timer 01 seconds 3Call Coverage Ring Timer5 seconds 4Modem Answer Time-out25 seconds 5Pulse Dial Inter-Digit Timer300 ms 6DTMF Time...
Page 439
System Parameters Programming Additional System Timers2-17 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description The feature lets a digital key station press a flexible button or dial a code and redial a busy or no-answer number at specific intervals. The user is signaled via a queue callback indication, The Redial flexible button flashes at the callback rate of 120 ipm for 15 seconds. If the station does not answer within 15 seconds, the callback is cancelled....
Page 440
2-18System Parameters Programming Additional System Timers Call Coverage Ring Timer Programming Steps 1Press the CALL CVRG RING TIMER flexible button (FLASH 02, button #3). The following message displays: CALLOgOVERAGE RING00-99 a aEnter a 2-digit timer value on the dial pad that corresponds to 00-99 seconds. 3Press HOLD to save the entry. A confirmation tone is heard and the display updates. Description A ringing Call Coverage button enables the user to place another station under a flex button. For...