Vodavi Starplus Triad S Description Manual

System Parameters Programming
Additional System Timers2-19
Pulse Dial Inter-Digit Timer
Programming Steps
1Press the PULSE DIAL I/D TIMER flexible button (FLASH 02, button #5). The following
message displays:
INT DIGIT PULSE300-600
300
\
2Enter a 3-digit timer value on the dial pad that corresponds to 300-600 ms.
3Press HOLD to save the entry. A confirmation tone is heard and the display updates.
Description
This governs the inter-digit time of the Pulse Dial Digits. By default, the Pulse Dial Ring Timer...

System Parameters Programming
System Features 1 Programming
System Features 1 Programming
Programming Steps
If the system is in the programming mode, continue using the program codes, If starting to program here,
enter the programming mode.
1Press FLASH and dial [05]. The following message displays:
I
SYSTEM FEATURES 1
ENTER BUTTON NUMBER
I
Description
This section describes the procedures and steps necessary to program System Features in the System
Features programming area. The buttons on the digital...

System Parameters ProgrammingSystem Features 1 ProgrammingATTNHOLDEXTERNAL
EXECUTIVE
OVERRIDE
+% EiQIPAGE WARN
TONE
*15GROUP
LISTENING
#%19CALL QUALIFIER
TONE OPTION
+I#-PREFERENCE
NIGHT RING
*- 113BACKGROUND
MUSICLCR ENABLE
%16 #mIDLE SPEAKERCALL COST
MODEDISPLAYOVERRIDE
*mACCOUNT
CODES
%IsMUSIC ON HOLD
Program
FlexFeatureDefault
CodeButton
(after initialization)
I,I
System Features 1:
FLASH 05
1Attendant Override
2Hold Preference
3External Night Ring
4Executive Warning
5Page Warning Tone
6Background...

System Parameters Programming
System Features 1 Programming
Attendant Override
Programming Steps
IPress the ATTN OVERRIDE flexible button (FLASH 05, button #I).
2Enter a l-digit value (O-l) that corresponds with the following entries:
[0] = Disabled
[I] = Enabled
ATTENDANT OVERRIDEo-1DISABLED
3Press HOLD to save the entry. A confirmation tone is heard.
Description
When this feature is enabled, it lets the attendant override a busy station or a station in DND. By default,
Attendant Override is...

System Parameters Programming
System Features 1 Programming2-23
Description
The system may be programmed to have Exclusive or System Hold preferred. If Exclusive Hold is preferred,
the user presses HOLD once for Exclusive Hold and twice for System Hold. If System Hold is preferred, the
user presses HOLD once for System Hold and twice for Exclusive Hold. Refer to System Timer programming
for System and Exclusive Hold recall times. By default, Hold Preference is System Hold.
External Night Ring
Programming...

2-24System Parameters Programming
S,ystem Features 1 Programming
3Press HOLD to save the entry. A confirmation tone is heard.
Description
This option enables Executive stations to override and barge-in on other key sets engaged in conversation
on a CO line. Prior to actual cut through of the third party, a warning tone is presented to all parties
notifying them of the barge-in. This warning tone, however, is a programmable option on a system-wide
basis, that either enables or disables the tone. When the...

System Parameters Programming
System Features 1 Programming2-25
Background Music
Programming Steps
T~::*$.
f&,‘.::”1;...Press the BACKGROUND MUSIC flexible button (FLASH 05. button #6).
zEnter a l-digit value (O-l) that corresponds with the following entries:
[0] = Disabled
[I] = Enabled
BACKGROUND MUSICO-lENABLED
3Press HOLD to save the entry. A confirmation tone is heard.
Description
The system can be programmed to let stations activate their Background Music, in addition to Music-On-
Hold. A music...

.
System Parameters Programming
System Features 1 ProgrammingAccount Codes 
- Forced
Programming StepsIPress ACCOUNT CODES flexible button (FLASH 05, button 
#8) to determine whether
the use of Account Codes is forced or optional.
2Enter a l-digit value (O-l) that corresponds with the following entries:
[O] = Disabled
[I] = Enabled
FORCED ACCOUNT CODEo-1DISABLED
3Press HOLD to save the entry. A confirmation tone is heard.
Description
The system can force the use of account codes on all restricted calls....

System Parameters Programming
System Features 1 Programming2-27
to both parties in the conversation. Group listening is unavailable when the station is in the headset mode, By
default, Group Listening is disabled.
y--,
c-2; Idle Speaker Mode
Programming Steps
IPress the IDLE SPEAKER MODE flexible button (FLASH 05, button #IO).
2Enter a l-digit value (O-l) that corresponds with the following entries:
[0] = First digit dialed is Heard (Disabled)
[I] = First digit dialed is Muted (Enabled)
IDLE SPEAKER...

.2-28
System Parameters Programming
System Features 1 Programming
Description
The Call Cost Display Feature lets a user view the approximate cost of each call made. This approximate cost
also prints as part of the SMDR record. The Call Cost Display replaces the call duration display when a call is
made using LCR. Cost information is programmable in LCR Flash 75. This enables the user to program four
separate costs based on the time of day. Costs entered in the tables are costs for one minute, however,...