Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

iq#inife DVX’tmdDVXn 
D&$&d Key Telephone Systems STATXON A-U== PROGRAMMWG 
PAGE “B” STATION ATTRIBUTES (Cont’d) 
B. StEtion class of Service (Cm) 
Pro#+?mxmg steps 
1. Press the CLASS OF SERVICE fkible but- 
ton (Page B. Button #Z). 
2. Enter a two-digit Class of Service entq as 
follows: 
l 1st digit is day COS 
+ 2nd digit is night COS 
The six classes of service are: 
- 1= unrestricted 
- 2= governed by Table A 
- 3= governed by Table B 
- 4= governed by Tables A and B 
- 5= no O,I,‘,# as first...

STATlON ATTRIBUTES PROGRNlMlNG 
PAGE “B” STATION ATTRJBUTES (Cont’d) 
C. Speakerphont/fXeadact FVog 
Progxamming Steps 
’ g 
1. Press the SPEAKERPHONE flexible button 
[Page B, Button #31. 
2. Enter a one-digit number on the dial pad 
between 0 and 3 to identify the speaker- 
phone 
operation. 
- 0 = works as normal 
speakerphone. 
FUI spezkrphone capabilities on 
both CO lines and Intercom. 
- I = Speakerphone 
enabled for inter- 
com calls only. Speakerphone capa- 
bilities disabled for outgoing CO...

i@ite DVX’ and DVX’ 
Di@l Key Telephone Systems 
STATION ATTRIBUTES PROGIMBlMRVG 
PAGE “B” STA’MON ATTRIBUTES (0mt’d) 
E. P@ng ant(s) pr0g-g 
Prof$Tmmbg steps 
l.Press the PAGING ZONES flexible button 
(Page B. Button #5). 
2.Enter a one-to-four digit number to pro- 
gram paging zone(s). 
- 0= no zone (no pages received) 
- l=Zonel 
- 2=Zone2 
- 3=Zone3 
- 4=Zone4 
3.Press the HOLD button to save the entry. 
Confbmation tone is heard and the display 
wIIl now update. Description 
PAGING ZONES. Each...

STATION ATTRXBUTES FROGIUWMING iqfinite DVXEUI~DVX~ 
D&&al Key Telephone Systems 
PAGE “B” STATION AmU’IE3 (Cont’d) 
F. Preset Call Forward Rogrammfn& 
Progr~ Steps 
1. Press the PRESET FORWARD flexible but- 
ton (Page B, Button #6). 
2.Enter a three-digit number to determine 
the destination where calis are to be routed 
when the preset forward timer expires. 
. 
3 dim 
- OZO-099= System Speed Bins 20-99 
for off-net forwz&fng 
- loo-155= station Numbers 
- 330-337= Hunt Groups l-8 
- MO-447= Voice Mail...

i@ite DVX’aadDVX’ 
~j#al Xt?y Telephone Systcme 
PAGE “B” 
STATION ATTRIBUTES (Cont’d) 
G. CO Lbe -Up hm?ss 
RoJqmmiTg steps 
LPress the CO LIFtI3 GROUP ACCESS flex- 
ible button (Page B. Button #7}. 
2. Enter up to seven digits (0, or 1-3 for the 
outside line groups the station wiIl have 
access to, 
- O=noaceess 
- 1 =accesstoGroup 1, Code9or81 
- 2 = access to Group 2. Code 82 
- 3 = access to Group 3. Code 83 
- 4 = access to Group 4, Code 84 
- 5 = access to Group 5. Code 85 
- 6 = access to Group...

STATION ATTRIBUTES PROGRAMMING 
iqfinite DVX and IWX 
D&it& Key T&phone Syatam~ 
PAGE “B” STATION ATTRIBUTES [Co&d) 
1. Off-Hook Preference Prog * g 
Programming steps 
TO program 
a station for OR-Hook Pre.ference; 
1. Press the OFF-HOOK PREF flexible button 
(Page B. Button #9). The following message 
is shown on the display phone: 
2. Enter the two-digit button number (0 l-28) 
or (00) to indicate no specific button is 
preferred. SLTs use 01 to enable or 00 to 
disable. 
3.Then. enter either 0 or 1...

i@ite DVX’andDVX’ 
~@ta,I gey T&phone Systems STATION A-m PROGRAMHING 
PAGE “B” STATION ATTRIBUTES (Cont’d) 
Pro@imming Step5 
1. Press the BUTION ASSIGN flexible buttnn 
(Page B. Button #lo). The following mes- 
sage is shown on the display phone: 
! MIlwlNMPlin~ 
c  / IllimmnoAl~ 
2. Enter the two-drgit button number IBB] to 
be programmed followed by the desired 
button function as follows: 
where: BB= Button number (0 l-24) 
MULTk To assign a button a5 amulti-firnctfon 
button tuner programmable)...

STATION AmUTES PROGEUMMING infinite DVX’ and DVX” 
Digital Key Telephone Systems 
PAGE 93” STATION ATTRIBUTES [Cont’d) 
pro- Steps 
7JNASSIGN: To unassign a button, enter: 
BB [#I HOLD 
If SLT stations are to be programmed for Off- 
Hook Refmence, it is necessary to program the 
desired CO line. or CO line group, the SLT is to 
acce.ss when going off-hook. 
To assign a CO Line for a SLT with Off-Hook 
Preference. enter: 
00 111 LLHOLD (LI= CO Line 01-28) 
To assign a CO Line group for an SLT wtth...

@jWte DVX’ and DVX” 
Dw&l Key Telephone Spstcms STATION ATTRJBm PFtOGRMkMIiUG 
PAGE ‘B” STATION ATTRIE)UTBS (Ckmt’d] 
K. Display Flexible Buttons 
Programming Steps 
If the flexible buttons are to be viewed: 
1. Press the DISPLAY BUTTONS flexible but- 
ton (Page B, Button # 17). The program- 
xning assignment on four buttons will be 
displayed starting with the lowest button 
number. 
With each sub-sequent deprcs- 
sion of the DISPLAY BUTTONS button, the 
next four buttons will be displayed. The...

f$lXTION ATTRIBUTES PROGRAMMING Digital Hey Telephone Systems 
PAGE ‘8” STATION ATIWBUTES (Cont’d) 
750.3 DIlsftal Data Interface Unit (DDIU) 
Prog * 2 steps 
To program a DigitaI Data Interface (DDIU) 
unit: 
a. Press FLASH and dial 1511. The foUowing 
message is shown on the display phone: 
where: 
- 
?VWW = Station Number (100-155) 
- XXXXX= Baud Rate 
- Y=DataPariiy 
- 2% Data Stop Bits 
b. Enter the three-digit station number of the 
DDIU unit. 
c. Press the HOLD button to save the entry. 
The...