Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

inlfinite DVX I and DVX ’ 
Dj@tal 
Key Telephone Systems 
PAGE 
“A” STATION ATTRIBUTES (Cont’d) 
C. Conference Enable/Disable (Per 
STATIOIV ATTRIBUTES PROGRAMhUNG 
station) 
Programming Steps 
l.Press the CONFERENCE flexible button 
[Page A, Button #3). This feature will toggle 
on and off with each depression, and the 
display will update with each depression. 
l LED on = Conference is enabled 
l LED off = Conference is disabled 
2.Press the HOLD button to save the entry. 
Confirmation tone is heard....

@finite DVX I and DV2L I1 
STATION 
A-- PROGRAMMING Digital Key Telephone Systems 
PAGE “A” STATION ATTRXBUTES (Co&d) 
E. Privacy (Per station) 
Profipmmdg Steps 
To 
program station(s) for Automatic Privacy: 
1. Press the PRIVACY flexlble button (Page A, 
Button #5). This feature wit1 toggle on and 
off with each depression, and the display 
will update with each depression. 
. LED on 
= Privacy is enabled on Sta- 
tions(s) 
. LED off = Privacy is disabled on Sta- 
-m 
2.Press the I-lOLD button to save...

infinite DVX * and DVX’ 
~&itd Key Telephone Spatems STATION A-UTES PRoGZXAMMING 
pA(iE ‘A” STATION ATTRIBUTE-S (Cunt’d) 
F. System Speed Dial Access 
Prog~ steps 
1, Press the SPEED fieiible button (Page A, 
Button #6). This feature will toggle on and 
off with each depression, and tie display 
will update with each depression. 
. LED on = System Speed Dialing access 
is allowed 
l LED off= System Speed Dialing access is 
denied 
2.Pres.s the HOLD button to save the entry. 
Confirmation tone is heard....

r 
STATION ATTRIBUTES PROGRAMMING imite DVX*andDVXn 
[email protected] Key Telephone Systems 
PAGE “A” STATION ATTRIBUTES (Co&d] 
H. Prcfcrrcd Line Answer 
ptogrammbg Steps Description 
1. Press the PREF LINE ANSWER fl&ble but- 
PREF LINE ANSWER. Stations can be given the 
ton [Page A. Button #S]. This feature will ability to answer incoming outside line calls, 
toggle on and off with each depression. and transferred and recalling lines and he queues 
the display will update with each depres- by simply going...

irlfinite DVX * and DVX’ 
D&$a JXcy Telephone System8 STATION 
ATTRlBuTEs PROGRAMMING 
PAGE “A” STATION ATTRIBUTES (Cont’d] 
J. CaII Fonvardiq 
Prqqramming steps 
1. Press the CALL FORWARD flexible button 
(Page A, Button # lo]. This feature will tog- 
gle on and off with each depression, and 
the disp1ay will update with each deptes- 
sion. 
l LED on = Call Forwarding is allowed 
l LED off= Call Forwardhg is denied 
2.Press the HOLD button to save the entry. 
Confirmation tone is heard. Description...

infinite DVX ’ and DVX ’ 
STATION ATTRIBUIWS I?ROGRAblILdING Dtgltat Key Telephone 
Systems 
PAGE “A” STATION ATTRIBUTES [Cont’d) 
L. ACD Supe+r Monitor w/Barge-In 
Proglxmmhg Steps 
1. Press the SUPV 3mGE-IN flexible button 
(Page A, Button #12). This feature will tog- 
gle on and off with each depression. and 
the display will update with each depres- 
sion. 
l LED on = ACD Supv Barge-in is alIowed 
l LED off;; ACD Supv Barge-in is denied 
2.F%ess the HOLD button to save the entry. 
Confiiation tone is...

STATION AlTBIB= PROGRAMMING 
PAGE “B” 
STATTON ATTRIBUTE8 (Co&d) 
730.2 PAGE “B” INTRODUCMON 
Projg3mmkg Steps 
If t&e system is in the programming mode. 
continue using the program codes. If starting to 
program here, enter the programming mode. 
Refer to 700.2, Program Mode Entry (Key 
Station). 
If station features are to be changed: 
a. Press FLASH and dial [50]. The following 
message is shown on the display phone: 
b.Enterasix-digitnumber(lOO-155)forsta- 
tion range being programmed. If only one...

infinite DVX ’ and DVX ‘I 
STATION AmUTE! PROGRAMMING D&&al 
Kcv Telephone Systems 
PAGE “B” STATION ATTRIBUTES (Cmt’d) 
A Station IdcntJfication 
Programming Steps 
1. Press the STATiON ID flexible button page 
B. Button # 1). 
To program the Station ID for a Digital Termi- 
nal: 
1. Dial a [O] on the dial pad. 
2. Press the HOLD button to save the entry. 
Confirmation tone is heard and the display 
will now upaate. 
To program the Station ID for a DSS/DLS Con- 
sole with Map 1, Map 2 or Map 3: 
steps...

r 
irlfinite DVX’andDVX” 
Dj@al Key Telephone Systems STATION ATTZUBLITE-S I’ROGEAMMING 
PAGE ‘B” STATION ATTRIBUTES (Cont’d) 
station Identi&ation (Cont’d) 
To program the 
Station ID for a Relay/Sensor 
Module: 
Fro- steps 
l.lXd a 14) on the dial pad. 
2.Press the HOLD button to save the entry. 
Confirmation tone is heard and the display 
will 
now update. 
To program the Station ID for a SLT or OPX 
Station: 
Prog$amdng steps 
l.Diala151 onthedialpad. 
2. Press the HOLD button to save the entry....

i&s&e DVX and DVX” 
PAGE “B” STATION ATTRIBUTES (Cunt’d) 
station Identification [Cont’d) 
To program the Station ID for a SLTw/Message 
waiting Lamp: 
Pro- Steps 
l.Diala[6]onthedialpad. 
2. Press the HOLD button to save the entry. 
Confirmation tone is heard and the display 
will nuw update. 
To program the Station ID for a Digital Data 
Interface box (DDIIJ): 
ProgramminF( steps 
l.Di.ala(?]onthedialpad. 
2.Enter the three-digit associated station 
number. (100-155) or 
Enter ### in the case of a DDIU...