Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

irlfinfte DvX’andDvX” 
DQ.$w &y Telephone 
Systems CO LlNl3A~U’Xl-S PROG-G 
co IJNE ATTRIBUTES (Cont’d) 
Pro$!yM steps 
1. Press the LOOP SUPV flexible button (But- 
ton #61. 
2,Enter a one-digit timer value on the dial 
pad between 1 and 9 which corresponds to 
100-900 msec. 
3.Press the HOLD button to save the entry. 
Confirmation tone is heard and the display 
will now update. Description 
LOOP SUPV. Loop supervision is used primar- 
ily with DlSA, Voice MaiI/Auto Attendant and 
with unsupervised...

infutite DVX’ and DVX” 
Dij@tal Xcy Telephcme Systems 
G. Dl!SA Programming 
Profframming steps 
I. Press the DISA flexible button (Button W). 
2. Enter a one-digit value on the dial pad to 
Indicate type of DISA desired. 
- I= 24hou.r 
- 2= Night ordy 
- 0= no DISA (disable DISA) 
3. Press the HOLD button to save the entry- 
Confirmation tone is heard and the display 
will ROW update. Description 
DIM. A line can be assigned as a DlSA line 
during night service only or on a 24- hour basis. 
A maximum of...

irlfinite DVX’andDVXn 
~)@taI zxey Telephone Systems 
CO LINE ATTRIBIJTES PROGRAMMING 
CO LINE ATTRIBUTES (Cont’d) 
W. FlashTfmcr Programming 
Pr0jpnmm.g Steps 
l.Press the FLASH TIMER flexible button 
(Button #8). 
Z.Enter a two-digit timer value on the dial 
pad between 01-20 which corresponds to 
100 msec-2 seconds. 
3.Press the HOLD button to save the entry. 
ConiTirmation tone is heard and the display 
will now update. 
I. 
Line Group Programming 
Prw Steps 
I. Press the CO LINE GROUP flexible...

iqfiniie DVX’andDV2Kn 
cOLINEA’M’RIBUTESPRO-G 
D$$taI Key Telephone Systems 
co LJNE ATI’RIBUTES (Co&d) 
J. class of Semite (COS) F+ro& 
Programming Steps 
’ g 
1. Press the LINE COS flexible button (Button 
#lO). 
2.Enter a one-digit value on the dial pad 
between 1-5 which corresponds to five pos- 
sible class of service to which a line may be 
aSsigned: 
- COSl= No res&ictions. 
- COS2= Table A governs, Station COS 
2 and 4 are monitored. 
- COS3= Table B governs. Station COS 
3 amI 4 are monitored....

i@ite DVX’ and DVX s 
~i@aI Key T&phone Spstema CO LIME ATTRIBUTES PROGlUiMMING 
co LINE ATTRIBUTES (Cont’d) 
K. CO 
Line Ringing Assignments 
Progranxniug Steps 
Each CO line in the system may be assigned 
initial incoming ringing to one 
of the following 
destinations: 
a one or more stations (keyset or SLT) 
l to an ACD, UCD. Voice Mail or Hunt 
Gl-Wp 
. Off-Net (via speed dial) 
1. Press the RING ASSIGNMENT fI&ble but- 
ton (Button #Xl] to toggle to the Ringing 
Assignment display. The display wilI...

r 
CO LINE ATTRIBUTES PFtOGRAMMING iqj?nite DVX’aadDVX” 
Di.#aI Key Ttlephone Syratms 
co LINE ATTRIBUTE!5 (Cont’d) 
L. 
CO Line Identificatfon Display 
pro@-mming 
steps 
Each CO line in the system can be programmed 
to have a name associated to it in database 
programming. 
1. Press the CO LINE IDEIWIFICATION flex- 
ible button (Button #12). The folIowing 
message is shown on the display phone: 
2. Enter the name by using keys on the dial 
pad as follows. Valid alpha-numeric char- 
acters are: A-Z....

CO LINE A’ITKIBUTE!3 PROGRAMMING 
720.2 DIALPULSE PARAMETERS 
gntmmhg Steps 
If this feature is to be assigned: 
a. Press FLASH and dial 141). The following 
message is shown on the display phone: 
I._...,., 
ml 10PFs 
b.‘Ihe Dial Pulse features will toggle on and 
off with each depression, and the display 
will update with each depression. 
. JXDon=60/40(RKTI0). 1OppsW’EED~ 
. ISDoff = 66/33 (RATIO), 20pps WEED1 
c. Press the HOLD button to save the entxy. 
Confirmation tone is heard and the display...

r 
CO IJNE A-UTES l’ROGlUMMING iqfhzite DVX’ and DVX” 
D&ital Ecy Telephone Systems 
co I~INE ATTRIBUTES (Cont’d) 
720.3 FLEXIBLE PORT ASSIGNKENT 
FlrATuRE 
Programming steps Description 
if the CO Line numbers need to be relocated to 
different ports: 
a. Press FLASH and dial (421. The following 
message is shown on the display phone: 
5 
b.The buttons 1 through 7 indicate cards 1 
through 7. When the relocation program is 
initially entered, Button #I will be lit indi- 
cating 
that the user is...

r 
infinite DVX’ and DVX’ 
D&itd Key Telephone SyrMms 
STATION ATTRIBUTES PROGRAMMING 
SECTION 730 
STATION ATTRIBUTES PROG~NG 
750.1 INTRODUCTION 
Pr0g-t 
+ng Steps 
If the system is in the 
programming mode, 
continue using the program codes. If starting 
to 
program here, enter the programming mode. 
Refer 
to 700.2. Program Mode Entry (Key 
Staffon). 
If station features are to be changed: 
a. Press FLASH and dial [50). The following 
message is shown 
on the &play phone: 
;I 
b. 
Enter a six-digit...

iqfhtite DVX’ aad DVX I1 
s’.IXl’ION ATTRIBUTES PROGEUIMMZVG Digital Key Telephone Systems 
PAGE 
‘A” STATION ATTRIBUTES [Cont’d) 
1. Press the PAGE ACCESS fl&ble button 
(Page A, Button # 
1). ‘Ihis feature will to&e 
on and off with each depression. and the 
display will update with each depression. 
l LED on = Paging is allowed 
. IEDoff=Pagirqisdenied 
2. Press the HOLD button to save the entry. 
Confirmation tone is heard. 
Description 
PAGE ACCESS. Stations can individua@ be 
allowed or denied the...