Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

VOICE IYUUL GROUPS (VB%l 
VOICE MAIL GROUPS (Cont’d) 
C. “Retrieve” Mail Index Entry 
Prom Steps 
To program the ‘Retrievti” mail index 
[out- 
pulsing table) to be accessed by the Voice Mail 
group: 
1. Press the RETRIEVE flexible button (But- 
ton #ill. 
2. Enter the one-d&It outpulsing table mnn- 
ber (O-7) on the dial pad. 
3.Pres.s the HOLD button to save the entry. 
Confiiation tone is heard snd the display 
will now update. 
D. St&ion hsi@mcat@) 
prog-mmmbg steps 
To program the stations in the...

VOICE MA= GROUPS WW iqjinite DVX’andDVXn 
Digital Key Telephone Systems 
VOICE hTA= GROUPS Wnt’dl 
755.2 VOICE WUL OUTPULSING TAB- 
k Voice Mail In-Band SQpa.lbg 
ProJip3mdg steps 
If Voice Mail In-Band signaling is to be used: 
1. Press FLASH and dial [66]. The following 
message is shown on the display phone. 
Li 
Where: 
- y = Table index (O-7) 
- x = Entered digits 09, #, *, F’ausesj 
2. The TABLE 00 flexible button (Sutton # 1 
led is lit. To change tables, press the appm 
- -_ 
priate flexible...

ifiite DVX I and DVX” 
~igitd Key Telephone Systems 
VOICE MAIL 
GROUPS Wont’4 
VOICE B5AIL OUTKKSING TABLE (Cont’dl 
B. Voice Mail Dfeco~nect Table 
Prog * :! Steps 
1. Press the DISCUNNECT TABLE 8 flexkble 
button (Button #9). This is the table num- 
ber used for the Voice Mail disconnect sig- 
la. 
2. Enter up to 12-digits which will be used for 
the disconnect sQm.l. i.nclu~ ‘W and W. 
TRAN button = pause. 
S-Press the HOLD button to save the entry. 
Confirmation tone is heard and the display 
will...

VOXCE MAIL GLOW IVM] 
iqjhdte DVX’ and DVX” 
D&&al Key Telephone Systeme 
VOICE MAIL GROUPS (CcM’d) 
765.3 VOICE &SAIL IN-BAM) 
FEATURES 
- 
Programming Steps 
1. Press FLASH and dial [67]. The following 
message will be shown on the display Description 
k voiec Mail In-Band Mgtte 
Fframming steps 
If Voice Mail In-Band Digits are to be enabled 
or disabled for Incoming CO callers; 
1. Ffress the INCOMING ID DIGl’IZ flexible 
button (Button # 1). 
It will toggle on and off 
with each depression. 
....

iq@ik DVX’andDVXn 
D@taI Eey Telephone System VOKZ MAIL GROUPS (‘VW 
VOICE MAIL GROUPS (Cont’d) 
VOICE MAIL IN-BAND FEATURES (Cont’d) 
Pro&p- - gsteps 
Description 
If Voice Mafl CalI Forward is to be enabled or 
disabled for Incoming CO callers: 
1. Press the CALL FWD ff exible button (But- 
ton #2]. It will toggle on and off with each 
depression. 
l LED on = call Forward is enabled 
l LED off = CaU Forward is disabled 
This feature allows Voice Mail calls, upon 
reaching a forwarded to VM station, to...

@‘i&e DVX’ and DVX” 
~j&al Key Telephone Systems EXCEPTION TABLES PROGRAMMING 
SECTION 760 
EXCEPTION TABLES PROCZMMMING 
760.1 EXCEFl!lON TABLES pROGR4kC 
MING 
Fkogrammiry! Steps 
The in. DigitaI Key Telephone System offers 
a flexible means of applying 
toll restriction to 
stations or Mlividuals. Dialing privileges (or toll 
restriction} is determined through assignment 
of station and CO line Class Of Sendce (COS). 
Several types of restriction can be derived sim- 
ply by programming cos assignments...

EXCJ@TION TABLES PROGRAMMXNG 
infinite DVX’ and DVX” 
Digital Key Telephone Systems 
760.2 RELATED ll’EMS TO TOLL RI% 
Table 760-2 Allow/Deny Toll Table 
I ; CONDITIONS AND RJ.ZSUL7-S I 
/D’ 
2 I I 
’ R f [ FOUND ! D I 
NOT i 
FOUND j A 
!R! 
I LFOIJND~AI I 
Iuj FOUND 1 D 
I.-- NOT 
E 
FOUND ‘- 
l--T- 
Nm A 
4 FOUND 
I I 
I I I 
A special YWYt Care” I’D”) character may be 
entered as a digit to either allow or deny any 
digit dialed in that digit sequence. For example 
a code (1 -D” 01 
and [I “D” I) may...

irlfinite DVX * and DVX ’ 
D@m fzey Telephone Sy8tcma 
DVX ’ System. for monitoring SLT dialing. 
lfa system has heavy SLTusage toll restric- 
tion may inhibit dialing by SLT stations. 
TWO options are available to help alleviate 
this problem; 1) shorten the SLT receiver 
timer (refer to Sec. 710. I, SLT DTMF 
Receiver timer). This will free up DYlMF 
receivers faster, however, may not provide 
the desired toll restriction for SLT stations; 
or 2) Enable LCR and force LCR on SLT 
stations. when the LCR...

[email protected]@ D= I and DVX I1 
Digit&l Key Telephone 
Svsttms 
760.3 
TOLL RESTRICTION PROGRAM- 
MlNG 
A. 
Entering Td Table Prom 
Projpammhg Steps 
If the system is in the programming mode, 
continue using the program codes. If starting to 
program here, enter the programming mode. 
Refer to Sec. 700.2. Program Mode Entry (Key 
1. Press FLASH and dial 
1701. The folkxvlng 
message is shown on the display phone: 
I 
2.To program allow/deny tables, press the 
appropriate Table button and enter infor- 
mation...

EXCEPTION TABIJW FROG-0 
EX~~ION TABLES FROG-G 
&ont’d) 
FL Allow Table Rogrammj% 
1. press the ALlxlW TABLE A or ALLOW TA- 
Bl,E B flexible button (Button #l or #3). 
The following message is shown on the 
display telephone: 
The fkst two bins locations are displayed. 
2. Enter the two-digit bin number (0 1 -ZO} of 
the bin to be programmed. 
Ittsrrcanmcndsd~~37knstrcrad f 
fbranmkythordIr6snsro# sptdor-k 
n-r 3; Bin 38 bc rrsapsdfbrrmantry 
thatwarr;fe~spedol.doMenrmrba3; 
nstfisafor~qpecirrI...