Vodavi Infinite Dvx I, Dvx Ii Hybrid Key Telephone Systems Installation Manual

irVfinite DVX ’ and DVX ‘I 
Digital Key Telephone Spsteme LEAGT COST ROUTING &CR) PRCIGRAMlywG 
LCRPROG FunWING (Co&d) 
D, Route List Table 
1. Press the ROUTE LISTTABLE flexible but- 
ton (Button #4). The following message will 
be shown on the display phone: 
Where: 
- RR = Route List Table number 00-15 
- T = Time Period Route list l-4 
- G = CO Line Group l-7 
- DD = Insert/Delete Table reference 
00-19 (## for none) 
- L= LCR Class of service (LCOS) 
2.Press the HOLD button to save the entry....

iq.f;nite DVX’ and DVX” 
w COST ROUTING &CR) PROGIXAMMRVG D&itaI Key Telephone Systems 
LCRPROG RAMMING (Cont’d) 
Route lht Table (Cont’d) 
Pro- steps Description 
LCR CO5 Pdority. A station should be as- 
signed a class of service for LCR. Refer to Sec. 
730.1. Station Attributes Programming. LCR 
Class of service (COSI. The LCR COS can be 
between 0 and 6. with 0 being unrestricted and 
6 being the most restrictive. Within the time 
period route List Table, line groups are given an 
LCR COS Priority...

[email protected] DVX’andDVX’ 
~@tal Key T&phone Systtnm LEAST COST ROUTING (LCR) PROGRAMMING 
LCR PRffi RAMMING (Co&d) 
E. Insert/Delete Table 
programmbg Steps 
l.Press INSERT/DELm TABLE flexible 
button (button #5). The following message 
will be shown on the display phone: 
Enter the table information as follows; 
Whel-f?: 
- ‘IT = Insert/Delete Table Number OO- 
19 
- X = (01 Pm-Delete numbers (fir;st dig- 
its dialed in the number). 
[l] Pre-Insert numbers [insert digits 
in front of number dialed, 
(21...

L-CR== Rt3MMING (@nt’d) 
F. ~afly Start Thnc Tabk 
Proj+-mmdng Steps 
1. press the DAILY E3XFS flexible button 
(button #6). The following message wifI be 
shown on the display phone: 
2. Enter times in military form (2400 Bours) 
in succe8sioIL 
3.FVess the HOLD button to save the entry. 
Confirmation tone is heard and the display 
wiil now update. Default times are 0800. 
~700,2300(8AM,5PM,and11pM),and 
the fourth time is disabled [#I###). To 
change a start time all times must be re- 
entered. Four...

LEdST COST ROUTING (LCR) PROGRAMM]iNG 
LCR PROG RAMMlNG (Cont’d) 
G. Weekly Schedule T&e 
Pro@anunirX Step5 
1. Press the WEEKLY SCHED flexible button 
(button #7). The following message will be 
shown on the display phone: 
where: 33~ Day of the Week 
- Ck Monday 
- 1= Tuesday 
- 2= Wednesday 
- 3=Thursday 
- 4= Friday 
- 5= Saturday 
- 6= Sunday 
T = Time Period Route List (l-4) to use for the 
time of day (based on the daily start time table]. 
Enter values for all time periods spedfied in the 
daily...

irifinite DVX’ aadDvX” 
LEAST COST ROUTING &CR] PROGRAMMING D&ital Key Telephone Systems 
LCR PROG RAlHMlNG (Cont’d) 
FL LCR Routing for Toll Information 
gmmning Steps 
1. Press TOLL IWO fl&ble button (button 
#8)ThefoIlo~messagewillbeshawnon 
the display phone: 
2. Enter the two-digit Route List number (OO- 
15) for the Route to be referenced in the 
Route List Table. 
3. Press the HOLD button after programming 
the Route number. Conknation tone is 
heard and the display will now update. 
4.Enable ICR...

LEA2ST COST ROUTING WR1 PROGRAMMING 
CCR PROGRAMKiN 
0 [Co&d) 
I. Dcfhult LCR Database 
pr0g ’ g Steps Description 
In an effort to decrease installation and set up 
time, usually associated with LCR, a default 
LCR database has been incorporated. The de- 
fault LCR database will provide basic routing 
for local and long distance dialing. Default en- 
tries have been made in the 3-Digit Table for 
local offlce codes (lWXs1 and ail area codes 
(NPA’s). Tko routes have been established with 
the default...

imite DVX I and DVX ’ 
D&ital Key Telephone Systems - DATABASE PARAMETERS 
SECTION 770 
INITULIZE DATABASE PARAMETERS 
770.1 INTRODUCTI0N 
ProgITmmhg steps 
If the system is in the programming mode, 
continue usingthe program codes. Ifstarting to 
program here, enter the prog - g mode. 
Refer to Sec. 700.2. Program Mode Entry (Key 
Station). 
If Database Parameters need to be initiafized: 
1. Press FLASH and dial [80]. The following 
message wU be shown on the display of a 
display phone: Description...

infinite DVX I and DVX I1 
nqn%UZE DATABASE PARAMETERS 
D@IxI Key 
Telephone Systems 
JNIT DATAWISE PW IZS (Coat’d) 
k Initialize System Parameters 
Programming Steps 
If System Parameters need to he initialized: 
1. Press the System Parameters flexible but- 
ton 
(Button # 11. The following message will 
be shown on the display phone: Description 
The system parameters may be initialized set- 
ting all data fields 
to their original. default 
values. The following data fields are returned to 
their...

injidte DVX I and DVX ’ 
D@tal Hey Telephone By&ems INTMUZE DATADASE PAR4MJXER3 
INIT. DATABASE PARAMETE RS Whnt’d) 
Ini* syf3tcm P armmeters (C-ont’d) 
ProgK3mming steps Description 
i PROGRAM CODE iBEN 
1 MISC. SYSTEM FEATURE DEFAULTVALUE 
(after initim 
i FEATURES 
iFLASH 
/FLASH11 
IlUSH j Attendant Assignment 
I SIA 100 I 
1-4 I Time and Date Format 12 HR M/D/Y 
j PBX Dialing Codes None 
FLASH 13 
Issue 1, Jamry lSB3 
770-S