Telrad Digital Emagen Unified Messaging System Manual

76-110-0887/0, Issue 1
3-26
%%T
MaxRecvPages: 25
 Are these ok [yes]?yes
 Hylafax configuration.
1. Run fax setup.
2. Add a modem.
3. Remove a modem.
4. List availiable modems.
q. Finish with hylafax configuration.
>4
Modem List
ttyS3 [make sure you see the modem defined]
Press enter to continue.[enter]
 Hylafax configuration.
1. Run fax setup.
2. Add a modem.
3. Remove a modem.
4. List availiable modems.
q. Finish with hylafax configuration.
>2
Enter device (ttyXXX):ttyM1a
Press [enter] for all...

Section 3:  INSTALLATION
3-27
4. List availiable modems.
q. Finish with hylafax configuration.
>2
Enter device (ttyXXX):ttyM1c
press [enter]for all options.
Are these ok [yes]? Ye s
 Hylafax configuration.
1. Run fax setup.
2. Add a modem.
3. Remove a modem.
4. List availiable modems.
q. Finish with hylafax configuration.
>2
Enter device (ttyXXX): ttyM1d
press [enter]for all options.
Are these ok [yes]? Ye s
 Hylafax configuration.
1. Run fax setup.
2. Add a modem.
3. Remove a modem.
4. List...

76-110-0887/0, Issue 1
3-28
3.21 INSTALLATION INSTRUCTIONS FOR ADDING ELEMENTS TO 
THE emaGEN SYSTEM
3.21.1 How to add voice ports
1. Run t3adm
2. Select x (extra stuff)
3. Select option 5 configure voice board
4. Follow instructions for adding voice boards
5. Replace the a1 file for support of more voice ports
6. Shut down system
7. Add voice boards (make sure to strap the jumpers properly)
8. Start system
3.21.2 How to add fax ports
1. Power off the system and insert the fax board
2. Boot the system
3....

Section 3:  INSTALLATION
3-29
3. Select option 3 registry
4. Set parameters ->HostName to the IP address of the t3 system
5. Set smtp ->MailServer to the IP address of the SMTP server to 
be used to send out
6. Set smtp ->Sender to an email address for the system adminis-
trator
7. Select option 1 Services
8. Select option 5 and set t3imap and t3pop to Automatic
9. Restart t3vm,t3pop,t3imap
10. Follow instructions in system manual to setting up email client to 
a specific mailbox
11. For Send Mail...

76-110-0887/0, Issue 1
3-30
3.21.6 How to add Speech Recognition
NOTE
In order to assure proper functioning of the
Speech Recognition feature, it is recom-
mended that adequate memory be installed
in the 
emaGEN-PC. 
128 MB memory should be added to an
emaGEN-PC with an initial memory of 128
MB, for every four additional voice ports
installed in the system -- when upgrading
from the initial four voice ports.
1. Make sure you have ASR license for each voice port
2. Run t3adm
3. Select option 3 Registry
4....

Section 3:  INSTALLATION
3-31
2. Load tone file(s).
3. Change registry keys.
4. Basic network configuration.
5.System backup.
6. System monitor.
7. A1 Info.
8. Verify Installation.
9. Shutdown system.
x. Extra stuff.
 Select option 5 for system backup.
This will backup your system.
Before that, it will stop any 
emaGEN services.
Continue [yes/no]?yes
All files backup to /../usr/T3/backup.
******************Backup  Completed ******************
3.22.2 Restore option:
 Connect to 
emaGEN voice mail with...

76-110-0887/0, Issue 1
3-32
NOTE
Restore will take affect from files under 
/../usr/backup only. Do not change the 
folder name or directory path.
******************Restore Completed ******************
3.23emaGEN SYSTEM DETAILED 
VERSION UPGRADE INSTRUCTIONS
3.23.1 To view your current system version.
1. Connect to the system with the Telnet command:
telnet [system ip].
2. Type system login user name: tenecs
3. Type system login password: tenecs
4. Type the command SU -- to login as administrator.
5....

Section 3:  INSTALLATION
3-33
to change to the installation directory file.
5. Type the command ./t3update 
-- to upgrade the system version.
6. At the end of the upgrade 
process type the command reboot
-- to reboot the system with new version.
7. Close the Telnet session.
3.23.4 Verify correct system version
After the system is up again, repeat the instructions in Section 
3.23.1, above, to see if the system version is updated and if the 
upgrade installation is verified as correct. 

76-110-0887/0, Issue 1
3-34
THIS PAGE INTENTIONALLY BLANK 

4-1
Section 4 
OPERATION
4.1 GENERAL
Before the system actually begins processing calls, certain informa-
tion must be entered to complete the installation. Information about 
the company, the telephone system, and mailboxes must be en-
tered.
4.2 CONVENTIONS
A command is always referred to by the chain of menus you need to select 
to get to it. For example, to enter the mailbox menu: Users -> Mailboxes
4.3 GENERAL RULES
There are a number of general rules of operation that apply no matter what 
part of...