Telrad Digital Emagen Unified Messaging System Manual

76-110-0887/0, Issue 1
3-16
 Carry out the postinstallation checks described in Section 3.17 to 
Section 3.19 of this manual.
 Program a series of 
unite features, which are necessary in 
order for 
emaGEN to operate, following the programming 
instructions in Section 19 of this manual.
WARNING
    
You should install an AC surge protector to
protect the 
emaGEN-PC against power
fluctuations. Install the surge protector
before setup and test procedures are car-
ried out. Use of a UPS is also recom-...

Section 3:  INSTALLATION
3-17
Use modular line cords between the single-line set connections and 
the ports, then bundle and secure the modular cords. Use a marker 
to write the extension number assigned to the port number on the 
modular cords.
Depending on the type of telephone system, and whether or not the 
system is integrated, the method of connecting with the telephone 
system varies. More information on integration may be found in the 
PBX chapter.
3.13 PBX SOFTWARE CONSIDERATIONS
emaGEN...

76-110-0887/0, Issue 1
3-18
3.14 INSTALLING THE emaGEN SYSTEM
Use the following procedure to install the equipment:
1. Inspect the shipping cartons for signs of damage. 
 The Carrier is responsible for any damage caused during 
shipment and should provide the distributor with information 
needed to file a damage report. 
 Once the claim has been filed, the item or items will then be 
repaired or replaced.
2. Carefully open each carton and remove the content. 
 Check the equipment against the packing...

Section 3:  INSTALLATION
3-19
2. Walk through Site Parameters and enter appropriate informa-
tion.
3. Enter Port Definition and configure the lines as needed.
4. Walk through PBX Parameters and integrate 
emaGEN with the 
local PBX.
5. If there are several departments in the particular installation, 
define them in Department definition.
6. Set the classes of service according to the customer’s needs.
7. Open mailboxes.
3.16 CHECKLIST
After completing the installation process, including the PBX section,...

76-110-0887/0, Issue 1
3-20
3.17 CHECKING CABLING
After completing hardware installation, check all the wiring and 
cables for integrity and secure connections. Particular attention 
should be paid to the following items: 
 The audio connections between:
 each 
emaGEN-PC voice mail card and the audio junction 
box;
 the audio junction box and the MDF.
 The data cabling between the 
emaGEN-PC voice mail card and 
the OCD card.
 That all the connections to the 
unite system cabinet are firmly in...

Section 3:  INSTALLATION
3-21
3.20emaGEN SYSTEM DETAILED 
INSTALLATION INSTRUCTIONS
3.20.1emaGEN Voice Mail full installation -- version 9
NOTE
Commands you need to type are shown in
bold.
 Connect to the system with the following FTP command 
and 
paste the installation file (t3install.tgz) to the directory.
FTP://root:tenecs@[system_ip]
 Connect to the system with the Telnet command 
-- or locally with the terminal windows.
Telnet [system_ip]

emaGEN login: tenecs
 Password: tenecs
Last login:Sun...

76-110-0887/0, Issue 1
3-22
 Enter password for user  t3adm.tenecs
 New password:tenecs
Bad password: too simple
 Re-enter new password:tenecs
Password changed.
 Configure postgres 
database (Y/N)?:y
 Import vmsys database (Y/N)?:y
 This will erase the old data. Are you sure (Y/N)?:y
 Import default registry (Y/N)?:y
 Install a1.exe file (Y/N)?:n
 Do you want to install other languages (Y/N)?:y
 Install Hebrew (Y/N)?:y
 Install extra stuff (Y/N)?:y
\jsdk/.......
 Install/Remove modem card.
1....

Section 3:  INSTALLATION
3-23
2. Add a modem.
3. Remove a modem.
4. List availiable modems.
q. Finish with hylafax configuration.
>1
Setup program for HylaFAX (tm)4.1.
No scheduler config file exists,creating one from scratch.
Country code [1]?[enter]
Area code []? 3
Long distance dialing 
prefix [1]? [enter]
International dialing 
prefix [011]? [enter]
Dial string rules file (relative 
to /var/spool/hylafax)
[etc/dialrules]?[enter]
Tracing during normal 
server operation [1]?[enter]
Default tracing...

76-110-0887/0, Issue 1
3-24
 Are these ok [yes]?Ye s
Creating new configuration file /var/spool/hylafax/etc/config...
 Hylafax configuration.
1. Run fax setup.
2. Add a modem.
3. Remove a modem.
4. List availiable modems.
q. Finish with hylafax configuration.
>2
 Enter device (ttyXXX):ttyS3 (modem in com4 define ttyS1 
          for modem in com1)
Country code [1]?[enter]
Area code [415]?[enter]
Phone number of fax 
modem [+1.999.555.1212]?[enter]
Local identification string (for...

Section 3:  INSTALLATION
3-25
to /var/spool/hylafax)[]?[enter]
Tag line font file (relative to 
/var/spool/hylafax)
[etc/lutRS18.pcf]?[enter]
Tag line format string 
[From %%l|%c|Page 
%%P of %%T]?[enter]
Time before purging a stale 
UUCP lock file (secs)[30]?[enter]
Hold UUCP lockfile during 
inbound data calls [Yes]?[enter]
Hold UUCP lockfile during 
inbound voice calls [Yes]?[enter]
Percent good lines to accept 
during copy quality 
checking [95]?[enter]
Max consecutive bad lines to 
accept during...