Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Directory Dial2-121
Chapter 2 - Features and Operation
This is an example of the Directory Dial Table database printout.
Programming Steps
1. Press the DIRECTORY DIAL TABLE flexible button(FLASH 85, Button #10). The following
message displays:
LST
---
000
001
002
003
004
005
006
007
008
009
010
011
012
013
014
015
016
017
018
019
020
021
022
023
024
025
026
027
028
029
030
031
032
033
034
035
036
037
038
041
042
043
044
045
046
047
048BIN
---
100 
101 
102 
103 
104 
105 
106 
107 
108 
109 
110 
111...

2-122Directory Dial
Chapter 2 - Features and Operation
2. To print the Directory Dialing Table parameters, press the HOLD button. The following
message displays:
When the system finishes sending the requested information to the printer, a
confirmation tone sounds.
Dial-By-Name
Description
The system allows station users to dial extension numbers, or speed bins, by entering the
name of a person that has been programmed for that station. The system database allows
entry of a name (alphanumeric) up to 24...

Distinctive Ringing2-123
Chapter 2 - Features and Operation
Conditions
»The system dials the station that matches the dialed name when a unique match is found.
If multiple names are located (found) after eight digits, the first one is dialed.
»Names are entered as part of the system attributes database. Numbers may be entered as
part of a name. To avoid conflicts, all names must have a unique numerical sequence.
Distinctive Ringing
CO Line Distinctive Ring Tone
Description
The ring tone signal used to...

2-124Distinctive Ringing
Chapter 2 - Features and Operation
5. Press the RING TONE flexible button(FLASH 40, Page B, Button #9). The following
message displays:
6. Enter a valid number on the dial pad to change this feature.
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT…Ring Tone is set for 00 (697/770).
Enabling/Disabling Distinctive Ring Tone
Description
The distinctive ring tone feature must be enabled and disabled in admin programming.
Programming Steps...

Distinctive Ringing2-125
Chapter 2 - Features and Operation
Ring Tone - Station (User Selectable)
Description
The ring tone signal that notifies stations of an incoming call can be changed by each station
user to provide distinctive ringing among a group of stations. Each station user may select a
distinctive ringing tone used to ring their station. The system provides 36 different ring
patterns from which station users may select.
Operation
To select a distinctive ring tone for a station:
1. Dial the...

2-126Do Not Disturb
Chapter 2 - Features and Operation
»The tone selected provides TONE ringing normal or muted to the station whenever the
station is commanded to tone ring (i.e., this excludes Camp On tone programming
confirmation tones or other specific tones not considered TONE ringing).
»The selected tone is used to notify the station in the following cases:
-IncomingCOCall
-IncomingIntercomCall
- Transferred CO Line
- Recalling CO Line
- Call Back Notification
- Message Wait Call Back
- All Types...

Do Not Disturb2-127
Chapter 2 - Features and Operation
2. Enter the range of station numbers to be programmed. If only one station is being
programmed, enter that number twice (100 100).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
XXX-XXX = Station Range
4. Press the DO NOT DISTURB flexible button(FLASH 50, Page A, Button #2). The following
message displays:
5. Enter a 0 or...

2-128Do Not Disturb
Chapter 2 - Features and Operation
To remove Do Not Disturb:
1. Lift the handset.
2. Dial [631] or [662].
3. Replace the handset.
Conditions
»Calling stations receive a DND audible tone.
»Attendants do not have DND capability.
»DND capability is programmable on a per-station basis.
One-Time Do Not Disturb
Description
Prevents calls from ringing at your station while you are on a call. The One-Time DND
condition automatically cancels when you end your call.
Stations can be individually...

Executive Override2-129
Chapter 2 - Features and Operation
Do Not Disturb - DSS / BLF Flash Rate
Description
TheDoNotDisturbDSS/BLFflashrateistherateatwhichaDSSbuttonofastationflashes
when you are in a Do Not Disturb mode. This flash rate can be programmed to 29 different
options identified in the flash rate table. This enables the programmer to customize the key
system configuration to desired flash rates.
Programming Steps
1. Press the DND–DSS/BLF flexible button(FLASH 07, Button #6). The following...

2-130Executive Override
Chapter 2 - Features and Operation
A separate condition has been added to this feature which allows or disallow an Executive to
override an extension. This prevents an extension with override capability from overriding an
Executive’s station.
Programming Steps
1. PressFLASHand dial[50]. Flexible button #24 (New Range) is lit and the following
message displays:
2. Enter the range of station numbers to be programmed. If only one station is being
programmed, enter that number twice...