Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Direct Inward System Access (DISA) 2-111
Chapter 2 - Features and Operation
DISA callers may dial any station directly without going through the Attendant.
DISA Access Code
Description
The DISA Access Code feature permits assigning a 3-digit access code to the system. Anyone
calling on a DISA line must use this code to gain access to system features. To disable the
DISA access code, enter (#) three times. Use of this feature with or without access code can be
abused by callers.
Programming Steps
1. Press...

2-112 Direct Inward System Access (DISA)
Chapter 2 - Features and Operation
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the DISA flexible button(FLASH 40, Page A,...

Direct Inward System Access (DISA) 2-113
Chapter 2 - Features and Operation
DISA CO-to-CO
Description
The DISA CO-to-CO (or Conference) option on the CO line governs a DISA caller’s ability to
access other outside lines. CO lines must have DISA CO-to-CO enabled to allow a DISA caller
to establish an outgoing CO-to-CO connection. This allows for specific CO line access
restrictiononDISAcalls.AstationwithConferenceenabledcaninitiateaconferenceonCO
lines regardless of the CO line conference marking....

2-114 Direct Station Selection / Busy Lamp Field
Chapter 2 - Features and Operation
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT…DISA CO-to-CO is enabled for all CO lines.
Operation
1. Call the phone number the system administrator specified as the DISA line. The system
answers and returns internal dial tone.
2. Enter the DISA access code specified by the system administrator, if...

Direct Transfer Mode2-115
Chapter 2 - Features and Operation
Direct Transfer Mode
Description
An outside CO line can be transferred from one keyset to another. By using the TRANS
button, a screened (announced) transfer can be transferred directly to the handset on any
key station. Any number of attempts can be made to locate someone by calling different
keysets without losing the call. If a line is transferred to a busy station, it receives muted
ringing.
When enabled, supervised transfers (screened...

2-116Directory Dial
Chapter 2 - Features and Operation
Directory Dial also includes the following functions:

Directory Dial2-117
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
To scroll through the Directory List:

2-118Directory Dial
Chapter 2 - Features and Operation
For example, by last name and by first name, pointed to a station number and a speed
dial bin (home, or mobile phone number), or several different names associated to the
same speed dial bin.
To clear an entry:
1. Press the CLEAR flexible button(FLASH 23, Button #3).
2. Press HOLD to save the entry. A confirmation tone sounds and the display updates. The
entry is erased (both the BIN/ICM assignment and the programmed name).
Clear–Entries in the table...

Directory Dial2-119
Chapter 2 - Features and Operation
3. Dial [✳] to scroll up (next entry) through the list,
-or-
Dial [#] to scroll down (previous entry) through the list,
-or-
Press another key to view the list for a different letter of the alphabet.
4. When the desired name displays on the LCD, press the SPEED button to automatically dial
the destination station or outside phone number (via speed dial).
To transfer a call using Directory Dialing while on a call:
1. Press the TRANS button.
2. Dial...

2-120Directory Dial
Chapter 2 - Features and Operation
Initialize Directory Dial Table Parameters
Description
The Directory Dial Table Parameters may be initialized setting all data fields to their original
default values.
Programming Steps
1. Press the DIRECTORY DIAL TABLE flexible button (FLASH 80, Button #9). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
Print Directory Dial Table Parameters
Description
The Print Directory Dial Table command dumps the entire...