Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Flexible Button Assignment2-141
Chapter 2 - Features and Operation
6. Enter a valid button number [01-24] to program followed by the desired button function:
[0] = Flexible/user changeable
[1] = CO line
[2] = Loop button/all-purpose CO appearance
[3] = Pool for specific groups
[4] = Direct feature programmable
[#]=Locksbutton
Operation
To program a user-programmable Flexible Button:
1. Press the SPEED button twice.
2. Press the assigned button to program (it must be programmed in the database as a...

2-142Flexible Numbering
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit.
4. Pressbutton#20.ThedisplayupdatestoreflectcurrentprogrammingforPageB.
XXX-XXX = Station Range
5. Press the DISPLAY BUTTONS flexible button(FLASH 50, Page B, Button #14)to display
programming assignments. The following message displays:
XXX = Station Number
BB = Button Number
YYY = Button Function
Flexible Numbering...

Flexible Numbering2-143
Chapter 2 - Features and Operation
Programming Steps
PressFLASHand dial[52]. The following message displays:
To select a Fixed or Flexible Code:
1. Press Button 24 (Fixed) or Button 21 (Flexible).
2. Enter the desired code to change.
3. Press HOLD. The fixed and flexible number, as well as a description of the code, displays
on the LCD.
To change a Flexible Code:
1. Select the desired code.
2. Press Button 1. The red LED illuminates.
3. Delete the flexible number by pressing...

2-144Group Listening
Chapter 2 - Features and Operation
»The Discovery ACD event trace source and destination fields will be 4 digits. Station
numbers less than 4 digits will be prefixed with leading zeros.
»The programming will print out as part of the CO-STA port programming area. The
flexible numbering can be initialized in the CO-STA initialization area.
»If programming with a telephone -- All programming will be done using Fixed Codes,
regardless of the flexible codes.
EXAMPLE: If a station has been...

Headset Mode2-145
Chapter 2 - Features and Operation
Operation
To activate Group Listening while conversing on the handset:
Press the ON/OFF button. Both parties can then be heard on the digital station’sspeaker.
The speakerphone microphone is muted while the handset is off-hook.
To deactivate Group Listening while off-hook:
Press the ON/OFF button.
Conditions
»While using the speakerphone, lifting the handset turns off the speakerphone. To activate
group listening, press the ON/OFF button (to ON) while...

2-146Hold - Exclusive
Chapter 2 - Features and Operation
To activate Headset Mode:
Dial [634] on the dial pad,
-or-
Press preprogrammed HEADSET MODE button. LED lights steady.
To deactivate Headset Mode:
Dial [634] on the dial pad,
-or-
Press the preprogrammed HEADSET MODE button. LED extinguishes.
 SINGLE LINE TELEPHONE
Not applicable
Hold - Exclusive
Description
When a line is placed on Exclusive Hold, no other station in the system can retrieve the call.
Operation
Exclusive Hold may be programmed and...

Hold - Exclusive2-147
Chapter 2 - Features and Operation
Programming Steps
1. Press the EXCLUSIVE HOLD flexible button(FLASH 07, Button #12). The following
message displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer toTable 2-13 on page 2-137.)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT…Exclusive Hold flash rate is set for a Green 120 ipm Flash (24).
Exclusive Hold Recall Timer
Description...

2-148Hold - Preference
Chapter 2 - Features and Operation
Hold - Preference
Description
The Hold Preference feature allows either System or Exclusive hold as the primary hold on the
first depression of the HOLD button, depending upon programming. A second depression
invokes the second hold preference.
Programming Steps
1. Press the HOLD PREF flexible button(FLASH 05, Button #2).
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Exclusive Hold
[1] = System Hold
3. Press...

Hot Keypad2-149
Chapter 2 - Features and Operation
DEFAULT…System Hold flash rate is set for a Red 60 ipm Double Wink (04).
System Hold Recall Timer
Description
The System Hold Recall Timer determines the time before a call placed on System Hold recalls
the station placing the hold. If unanswered by that station, the call recalls the attendant.
The System Hold Recall Timer setting is variable from 000-300 seconds. An entry of 000
disables the timer and there is no recall.
Programming Steps
1. Press the...

2-150Hunt Groups
Chapter 2 - Features and Operation
Hunt Groups
Description
The system can be programmed for up to 12 Hunt Groups. Each Hunt Group can contain up
to 8 stations each. Each Hunt Group can be independently arranged to use a pilot hunting or
station hunting technique. If a station is in DND or is forwarded in any manner, it is
considered busy.
Programming Steps
1. PressFLASHand dial[30]. The following message displays:
The top left button in the flexible button field is lit for programming...