Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

ISDN Programming - Page B2-181
Chapter 2 - Features and Operation
Print ISDN/VoIP Parameters
Description
The Print ISDN / VOIP command dumps the entire database as a permanent record which can
serve as a hard copy of the database. The system baud rate must match that of the printer or
receiving device.
When printing the ISDN Timers, the following data is printed:

2-182Keyset Mode
Chapter 2 - Features and Operation
Programming Steps
1. Press the ISDN / VOIP flexible button(FLASH 85, Button #16). The following message
displays:
2. To print the ISDN Parameters, press the HOLD button. The following message displays:
When the system has finished sending the requested information to the printer,
confirmation tone sounds.
Keyset Mode
Description
The Keyset Mode feature (digital KTU only) allows the station user to determine the mode in
which the Digital Telephone with...

Keyset Mode2-183
Chapter 2 - Features and Operation
Programming Steps
1. PressFLASHand dial[50]. Flexible button #24 (New Range) is lit and the following
message displays:
2. Enter the range of station numbers to be programmed. If only one station is being
programmed, enter that number twice, e.g., [100 100].
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit.
4. Pressbutton#20.ThedisplayupdatestoreflectcurrentprogrammingforPageB....

2-184Last Number Redial
Chapter 2 - Features and Operation
Operation
At an idle station:
1. Dial the Keyset Mode code [648] on the dial pad,
-or-
Press preprogrammed KEYSET MODE button, the following displays:
2. Press [
✳] to scroll through the keyset modes.
3. Press [#] to scroll through the baud rates.
4. Press the HOLD button to save the desired entries.
℡ ELECTRONIC TELEPHONE
Not applicable
 SINGLE LINE TELEPHONE
Not applicable
Conditions
»Telephone must be in AT command mode to process AT...

LCD2-185
Chapter 2 - Features and Operation

2-186LCD
Chapter 2 - Features and Operation
This table shows LCD displays based on the function performed.
Table 2-16: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
Idle Station
Manually Dialing Outgoing Calls
Recalling Line from Hold
Recalling Line from Another Station
Connected to an Incoming CO line
Intercom Call
Camp On
Conference
* Features available with optional software
STATION XXX
MMM DD YY HH:MM am
STA XXXNAME
MMM DD YY HH:MM am
STATION XXXNAME
MMM DD YY...

LCD2-187
Chapter 2 - Features and Operation
Internal Page
External Zone Page and External All
Call Page
All Call Page
Meet Me Page
Station Call Forward
(originating station and name in
display)
Station No-Answer Call Forward
(originating station)
Station Busy/
No-Answer Call Forward
(originating station)
* Features available with optional software
Table 2-16: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
INTERNAL PAGE
ZONE X HH:MM amPA G E F R O M S TA X X X
MMM DD...

2-188LCD
Chapter 2 - Features and Operation
Station Busy
Call Forward
(originating station)
For warded Call
(name in display)
For warded
Intercom Call
Station Forwarded to Voice Mail
Group (station idle)
Station Forwarded to ACD* or UCD
Group (station idle)
Preset Forward
Station Call to Station Forwarded to
a Voice Mail Group*
Call Pick-Up
Exclusive Hold
* Features available with optional software
Table 2-16: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
BUSY FWD...

LCD2-189
Chapter 2 - Features and Operation
Do Not Disturb
Call Back
Outside Line Transfer
Message Waiting
ReplytoaMessageWaiting
Programmed Flash Command (F)
Programmed Pause Command (P)
Programmed Pulse-To-Tone
Switchover (S)
* Features available with optional software
Table 2-16: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
DO NOT DISTURB STA XXX
MMM DD YY HH:MM am
DO NOT DISTURB ..(name)..
MMM DD YY HH:MM am
STA IN DO NOT DISTURB
MMM DD YY HH:MM am
CALL BACK...

2-190LCD
Chapter 2 - Features and Operation
CO Line Queuing
Hunt Groups
ACD* or UCD Groups
RingingCOLines
Display Security
Station Forwarding Off-Net
Call to Station Forwarded Off-Net
(before and after a call is answered)
Calls in Queue
(supervisor)
Calls in Queue
(using dial code)
ACD* or UCD
* Features available with optional software
Table 2-16: Liquid Crystal Displays (LCD)
Function CALLING Station Display CALLED Station Display
PLACED IN QUEUE FOR
LINE XXX HH:MM am
QUEUE CALL BACK
LINE XXX HH:MM am...