Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Privacy Release2-221
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the PRIVACY flexible button(FLASH 40, Page A, Button #5).
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation...

2-222Privacy Release
Chapter 2 - Features and Operation
Per Station Option
Description
The system provides privacy on all communications in the system which prevents other
stations from accidentally entering an existing conversation. However, the system provides
the ability for a station to join an existing outside CO line conversation (on a per station
basis). Each station can be granted the privilege to join an existing CO line conversation by
simplypressingtheCOlinebuttonofaCOlineinuse.
Privacy on an...

Private Line2-223
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 is lit. The display updates to reflect current programming for Page A:
XXX-XXX = Station Range
4. Press the PRIVACY flexible button(FLASH 50, Page A, Button #5). The following
message displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds....

2-224Recall
Chapter 2 - Features and Operation
Recall
Answering a Recall
Description
When an outside line remains on hold for an extended period of time, a recalling ring
reminder is sent back to the originating station first and if not answered, recalls the attendant
station.
Operation
(If Preferred Line Answer is enabled, skip step 1.)
1. Press outside line, Loop or Pool button flashing at very fast rate.
2. Lift handset or press ON/OFF button to converse.
Transfer Recall Timer
Description
The Transfer...

Repeat Redial2-225
Chapter 2 - Features and Operation
Repeat Redial
Description
The Repeat Redial feature allows a digital key station to press a flexible button and redial a
busy or no-answer number after a specific interval. The user is signaled via a queue call back
indication.
The RPT REDIAL flexible button flashes at the call back rate of 120 ipm for 15 seconds. If the
station:

2-226Relay Programming
Chapter 2 - Features and Operation
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, line is seized and number is dialed. If the user receives a busy/no answer,
they may repeat the step to activate another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A confirmation tone sounds and the Auto
Redial function is cancelled.
 SINGLE LINE TELEPHONE
Not applicable
Conditions
»Once...

Remote Administration2-227
Chapter 2 - Features and Operation
2. Press the button that corresponds to the desired relay. That button lights. Enter one of
the following sequences on the keypad:
[1] + [1, 2, or 3] First three External Page Zones
[2] + [1 through 8] = RAN Start (RAN Announcement Tables 1-8)
[3] = PFTU Control
[4] + STA # = Loud Bell
[5] + CO # = CO Line Control
[0] = Disables Relay
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Each time the user...

2-228 Remote System Monitor And Maintenance
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT…Modem Answer Timer is set for 25 seconds.
Database Upload/Download
Description
Database Upload/Download provides a maintenance facility which is added to the Remote
Administration routine. This routine permits downloading of the database to a PC, when a
software change is made or when the system must be initialized and reprogrammed....

Ring Down/Hot Line/Off-Hook Preference 2-229
Chapter 2 - Features and Operation
Ring Down/Hot Line/Off-Hook Preference
Description
The Off-Hook Preference feature lets a key station user automatically have a flex button
selected when going off-hook or when pressing the ON/OFF button. An SLT user may have a
particular CO line or a CO line group selected automatically when going off-hook. This may
be established in programming so that key station users can select and/or change their
off-hook preference...

2-230 Ring Down/Hot Line/Off-Hook Preference
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit.
4. Pressbutton#20.ThedisplayupdatestoreflectcurrentprogrammingforPageB.
XXX-XXX = Station Range
5. Press the OFF-HOOK PREF flexible button(FLASH 50, Page B, Button #10). The following
message displays:
6. Enter a valid button number (01–24) or (00) to indicate no specific button is preferred.
(SLTs use...