Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Speed Dial2-241
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit.
4. Pressbutton#21.ThedisplayupdatestoreflectcurrentprogrammingforPageC.
XXX-XXX = Station Range
5. Press the SPEED DIAL ACCESS button (FLASH 50, Page C, Button #6). The following
message displays:
6. Enter a range of speed bins to be allowed (100-999). The leading digit 9 is not reflected on
the LCD and is not used for your entry.
7....

2-242Speed Dial
Chapter 2 - Features and Operation
Print System Speed Numbers
Description
The System Speed Numbers command dumps the entire database as a permanent record
which can serve as a hardcopy of the database. The system baud rate must match that of the
printer or receiving device.
Figure 2-17: System Speed Numbers Printout
Programming Steps
1. Press the SYSTEM SPEED flexible button(FLASH 85, Button #6). The following message
displays:
2. To print the System Speed bins, press the HOLD button. The...

Station Attributes2-243
Chapter 2 - Features and Operation
Station Attributes
Initialize Station Attributes
Description
The Station Parameters may be initialized setting all data fields to their original, default
values. The following data fields are returned to their default value upon initializing the
Station Attributes.
Table 2-20: Station Attribute Defaults
Program
CodeFlexible
ButtonFeaturesDefault Value
(after initialization)
FLASH 50 1 Paging Access Enabled
PAGE A 2 Do Not Disturb Enabled
3...

2-244Station Attributes
Chapter 2 - Features and Operation
Programming Steps
1. Press the STATION ATTRIBUTES flexible button (FLASH 80, Button #3). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
FLASH 50
PA G E B1 Station Identification 006 (24-Btn Keyset)
6(SLTw/oMW)
2 Station Day Class of Service (COS) COS 1
3 Station Night Class of Service (COS) COS 1
4 Speakerphone/Headset Programming 0=Full Speakerphone
5 Pick-Up Group(s) Programming Group 1
6 Paging Zone(s)...

Station Attributes2-245
Chapter 2 - Features and Operation
Print Station Attributes
Description
The Print Station Attributes command dumps the entire database as a permanent record
which can serve as a hardcopy of the database. The system baud rate must match that of the
printer or receiving device.
When printing the Station attributes the following data prints:
>>>All Current Station Parameters
Figure 2-18: Station Attributes Printout
STATION ATTRIBUTES
STA 100 STA 101
PAGE ACCESS ENABLED PAGE ACCESS...

2-246Station Identification
Chapter 2 - Features and Operation
Programming Steps
1. Press the STATION ATTRIBUTES flexible button(FLASH 85, Button #3). The following
message displays:
2. To print data for:

Station Identification2-247
Chapter 2 - Features and Operation
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit.
4. Pressbutton#20.ThedisplayupdatestoreflectcurrentprogrammingforPageB.
XXX-XXX = Station Range
5. Press the STATION ID flexible button(FLASH 50, Page B, Button #1).
6. Enter a valid number on the dial pad to identify type of telephone:
7. Press HOLD to save the entry. A confirmation tone sounds and the display updates....

2-248 Station Message Detail Recording
Chapter 2 - Features and Operation
Programming Steps
1. PresstheSTATIONIDLOCKflexiblebutton(FLASH 06, Button #8). The following
message displays:
2. Enter a 0 or 1 on the dial pad to enable/disable the use of this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT…Station ID Lock feature is disabled.
Station Message Detail Recording
Description
TheXTSstation message detail recording (SMDR) provides details on...

Station Message Detail Recording 2-249
Chapter 2 - Features and Operation
Figure 2-19: SMDR Printout
80 character format - Outbound Call to a Dialed Number:
12345678
12345678901234567890123456789012345678901234567890123456789012345678901234567890
AAAA BBB HH:MM:SS HH:MM MM/DD/YY HCCCCCCCCCCCCCCCCCCCCCCCC GGGGGGGGGGGG (CR)(LF)
STA   CO TOTAL    START   DATE   DIALED
1100 001 00:00:38 13:57 01/15/01 O2956006
80 character format - Outbound Call to an Extension:
12345678...

2-250 Station Message Detail Recording
Chapter 2 - Features and Operation
TheXTSsystem can provide SMDR output to the optional RS-232C connectors on the MISB.
When SMDR is desired, the following system-wide parameters determine how SMDR
information is reported.
Programming Steps
1. PressFLASHand dial[21]. The following message displays:
2. To program SMDR features, use the flexible button(s) as defined in the following
procedures.
3. The ENABLE/DISABLE, TYPE, and PRINT features toggle on and off each...