Home > Triad > Telephone > Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Here you can view all the pages of manual Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide. The Triad manuals for Telephone are available online for free. You can easily download all the documents as PDF.

Page 281

Station Message Detail Recording 2-251
Chapter 2 - Features and Operation
Long Distance / All Calls
Description
The system can be set to record all outgoing calls or only outgoing long distance calls. Long
Distance calls are defined as beginning with a 1 or 0, or containing eight or more digits.
Incoming calls are only recorded if TYPE is set for all calls.
Programming Steps
1. Press the CALL TYPE flexible button(FLASH 21, Button #2)to determine the type of calls
to record. This feature toggles on and...

Page 282

2-252 Station Message Detail Recording
Chapter 2 - Features and Operation
SMDR Port Assignments
Description
PORT #1-- RS-232C port labeled SCMI on the MPB
PORT #3 -- Refers to the RS-232C connector on the optional SIU.
PORT #4 -- Refers to the RS-232C connector on the optional SIU.
PORT #5 -- Refers to the UART on the MPB2.
Programming Steps
1. Press the PORT flexible button(FLASH 21, Button #5)to determine which port to use for
SMDR information.
2. Enter a valid number for the SMDR Port number:
[1] =...

Page 283

Station Relocation2-253
Chapter 2 - Features and Operation
Station Relocation
Description
The Station Relocation Feature lets a user unplug their station and plug it into another
location. Dialing a code followed by the old station number brings all the station attributes
including extension number, button mapping, speed dial, and class of service to the new
location.
Operation
1. A station can be relocated by unplugging it, then plugging it into a new location.
2. Dial [636] on the dial pad. Then, dial...

Page 284

2-254System Parameters
Chapter 2 - Features and Operation
System Parameters
Initialize System Parameters
Description
System Parameters may be initialized to set all data fields to their original default values. The
following data fields are returned to their default values upon initializing the System
Parameters.
Table 2-21: System Parameter Defaults
Program CodeFlexible
ButtonFeaturesDefault Value
(after initialization)
FLASH 01 SYSTEM TIMERS
1 System Hold Recall Timer 60 sec
2 Exclusive Hold Recall...

Page 285

System Parameters2-255
Chapter 2 - Features and Operation
FLASH 05 SYSTEM FEATURES 1
1 Attendant Override Disabled
2 Hold Preference System
3 External Night Ring Disabled
4 Executive Override Warning Tone Enabled
5 Page Warning Tone Enabled
6 Background Music Enabled
7 Least Cost Routing (LCR) Disabled
8 Account Codes - Forced Disabled
9 Group Listening Disabled
10 Idle Speaker Mode Disabled
11 Call Cost Display Feature Disabled
12 Music-On-Hold Enabled
13 Call Qualifier Tone Disabled
FLASH 06 SYSTEM...

Page 286

2-256System Parameters
Chapter 2 - Features and Operation
FLASH 07 FLASH RATES
1 Incoming CO Line Ringing Red 480 ipm flutter
2 Incoming Intercom Ringing Red 120 ipm flutter
3 Call Forward Button Red Steady On
4 Message Wait/VM Button Red Steady On
5 Message CallBack–DSS/BLF Red 120 ipm flutter
6DoNotDisturb–DSS/BLF Red 60 ipm Dbl Wink
7 Auto CallBack–DSS/BLF Red 120 ipm flash
8 UCD Available/Unavailable–DSS/BLF Red 60 ipm Dbl Wink
9 Transfer CO Ringing Red 120 ipm flash
10 Recall CO Ringing Red 480 ipm...

Page 287

System Parameters2-257
Chapter 2 - Features and Operation
Programming Steps
1. Press the SYSTEM PARAMETERS flexible button(FLASH 80, Button #1). The following
message displays:
2. Press the HOLD button. A confirmation tone sounds.
2 Station Range (FROM) 1000
3 Station Range ( TO) 8999
4 IP Address None
5 Ext BLF Cards 1-9 None
6 Check Status 0-1 Disabled
FLASH 20 1 DISA Access Code 100
2 Database Admin Password 3226
FLASH 21 1 SMDR Enable/Disable No
2 Long Distance/Local Assignment Long Distance
3...

Page 288

2-258System Parameters
Chapter 2 - Features and Operation
Print System Parameters
Description
The currently stored customer database can be printed or uploaded into a file. This command
dumps the entire database as a permanent record which can serve as a hardcopy of the
database. The system baud rate must match that of the printer or receiving device. When
printing the System Parameters the following data prints:

Page 289

System Parameters2-259
Chapter 2 - Features and Operation
MUSIC CHANNEL[3..8] CABINET SLOT TYPE
CO - ## #### ## ## ## ------- ---- ----
0 0 DT24
ATTENDANT STATIONS 0 1 DTIB
100 ## ## ## ## ## ## 0 2 DTIB
0 3 NONE
DATE & TIME FORMAT 0 4 SLIB
MM/DD/YY, 12 HOURS 0 5 NONE
0 6 LCOB
PBX DIALING CODES 0 7 PRIB
## ## ## ## ## 0 8 LCOB
0 9 MPB
EXECUTIVE/SECRETARY PAIRINGS 1 0-9 NONE
1 = ### ### 2 0-5 NONE
2 = ### ### 3 0-5 NONE
3 = ### ###
4 = ### ###
----------------------------
ON BOARD RELAY ASSIGNMENTS
NONE...

Page 290

2-260System Reset
Chapter 2 - Features and Operation
Programming Steps
1. Press the SYSTEM PARAMETERS flexible button(FLASH 85, Button #1). The following
message displays:
2. To print the System Parameters database, press the HOLD button. The following message
displays:
When the system finishes sending the information to the printer, a confirmation tone
sounds.
System Reset
Description
The System Reset feature provides a hard system reset from the keyset instead of the KSU.
This is useful in cases where...
Start reading Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

Related Manuals for Starplus Triad Xts Installation Digital Key Telephone System Instructions Guide

All Triad manuals