Sharp MX M283N User Manual
Have a look at the manual Sharp MX M283N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
7-34 SYSTEM SETTINGS Contents * When a saddle stitch finisher is installed. Network Settings XDisabling of Bypass-Tray in Duplex CopyDisabled7-71 XDisabling of Auto Paper SelectionDisabled7-71 XAuto Selection Setting of Tray that is Supplied the PaperDisabled7-71 X600dpi x 600dpi Scanning Mode for Document FeederDisabled7-71 XQuick Scan from Document GlassEnabled7-71 ItemFactory default settingPage ■Network Settings7-72 ●IPv4 SettingsDHCP7-72 ●IPv6 SettingsDisabled7-72 ●Enable TCP/IPEnabled7-72 ●Enable NetWareEnabled7-72 ●Enable EtherTalkEnabled7-72 ●Enable NetBEUIEnabled7-72 ●Reset the NIC–7-72 ●Ping Command–7-72 ItemFactory default settingPage Downloaded From ManualsPrinter.com Manuals
7-35 SYSTEM SETTINGS Contents Printer Settings Image Send Settings ItemFactory default settingPage ■Printer Settings7-73 ●Default Settings7-73 XProhibit Notice Page PrintingEnabled7-73 XProhibit Test Page PrintingDisabled7-73 XA4/Letter Size Auto ChangeVaries depending on country and region7-73 XPrint Density Level37-73 XBypass Tray Settings7-73 ‹Enable Detected Paper Size in Bypass TrayDisabled7-73 ‹Enable Selected Paper Type in Bypass TrayEnabled7-73 ‹Exclude Bypass-Tray from Auto Paper SelectDisabled7-73 XJob Spool QueuingEnabled7-73 XDisabling of USB Memory Direct PrintDisabled7-73 XDisabling of Network Folder Direct PrintDisabled7-73 ●Interface Settings7-74 XHexadecimal Dump ModeDisabled7-74 XI/O Timeout60 sec.7-74 XEnable USB PortEnabled7-74 XUSB Port Emulation SwitchingAuto7-74 XEnable Network PortEnabled7-74 XNetwork Port Emulation SwitchingAuto7-74 XPort Switching MethodSwitch at End of Job7-74 ItemFactory default settingPage ■Image Send Settings7-75 ●Operation Settings7-75 XOther Settings7-75 ‹Default Display SettingsScan (fax when fax is installed) 7-75 Hold settings for a while after scanning has been completedDisabled ‹Address Book Default SelectionTab Switch: ABC, Address Type: All7-75 Downloaded From ManualsPrinter.com Manuals
7-36 SYSTEM SETTINGS Contents ‹Initial Resolution Setting 7-75 Apply the Resolution Set when Stored: Disabled 200 X 200 dpi Internet Fax*1Apply the Resolution Set when Stored: Disabled 200 X 100 dpi 2Apply the Resolution Set when Stored: Disabled Standard ‹Default Exposure SettingsAuto 7-75 Original Image TypeText Moiré ReductionDisabled ‹Must Input Next Address Key at Broadcast SettingDisabled7-76 ‹Scan Complete Sound SettingMiddle7-76 ‹The Number of File Name/Subject/Body Keys Displayed Setting127-76 ‹The Number of Direct Address Keys Displayed Setting107-76 ‹Disable Switching of Display OrderDisabled7-76 ‹Hold Setting for Received Data PrintDisabled7-76 ‹Default Verification StampDisabled7-76 ‹Erase Width Adjustment 7-76 Edge Clearance Width10 mm (1/2) Centre Clearance Width10 mm (1/2) XSettings to Disable Registration7-76 ‹Disable Registering Destination from Operation PanelAll disabled7-76 ‹Disable Registering Destination on Web Page*3All disabled7-76 ‹Disable Registration of ProgramAll disabled7-77 ‹Disable Registration of Memory BoxAll disabled7-77 ‹Disable Destination Registration Using Global Address Search*3All disabled7-77 ‹Disable Registration Using Network Scanner Tool*3Disabled7-77 XSettings to Disable Transmission7-77 ‹Disable [Resend] on Image Send ModeDisabled7-77 ‹Disable Selection From Address BookAll disabled7-77 ‹Disable Direct EntryAll disabled7-77 ‹Disable PC-I-Fax Transmission*1Disabled7-77 ‹Disable PC-Fax Transmission*2Disabled7-77 ItemFactory default settingPage Downloaded From ManualsPrinter.com Manuals
7-37 SYSTEM SETTINGS Contents XOwn Name and Destination Set 7-78 ‹Sender Data Registration Sender Name– Sender Fax Number– I-Fax Own Address– ‹Registration of Own Name Select–7-78 ●Scan Settings7-79 XOther Settings7-79 ‹Default Sender Set–7-79 ‹Default Colour Mode SettingsMono27-79 ‹Initial File Format Setting 7-79 File TypePDF Black & WhiteMMR (G4) Colour/GreyscaleMedium Specified Pages per FileDisabled Number of PagesDisabled ‹Compression Mode at Broadcasting 7-79 Black & WhiteMH (G3) Colour/GreyscaleMedium ‹Maximum Size of E-mail Attachments (E-mail)Unlimited7-80 ‹Maximum Size of Data Attachments (FTP/Desktop/Network Folder)Unlimited7-80 ‹Bcc Setting 7-80 Enable BccDisabled Display Bcc Address on the Job Status ScreenDisabled ‹Disable Scan Function 7-80 USB Memory ScanDisabled Disabled ‹Pre-Setting Mail SignatureDisabled7-80 XDefault Address SettingDisabled7-80 ●I-Fax Settings*17-81 XI-Fax Default Settings7-81 ‹Auto Wake Up PrintEnabled7-81 ‹Compression SettingMH (G3)7-81 ‹Speaker Volume Setting– 7-81 Receive SignalMiddle Communication Error SignalMiddle ‹Original Print on Transaction ReportPrint Out Error Report Only7-81 ItemFactory default settingPage Downloaded From ManualsPrinter.com Manuals
7-38 SYSTEM SETTINGS Contents *1 When the Internet fax expansion kit is installed. *2 When the facsimile expansion kit is installed. *3 When network connection is enabled. *4 This function is not available in some countries and regions. ‹Transaction Report Print Select Setting 7-81 Single SendingPrint Out Error Report Only BroadcastingPrint Out All Report ReceivingNo Printed Report ‹Activity Report Print Select Setting 7-82 Auto Print at Memory FullDisabled Print Daily at Designated TimeDisabled ‹Body Text Print Select SettingDisabled7-82 ‹Pre-Setting Mail SignatureDisabled7-82 XI-Fax Send Settings7-82 ‹I-Fax Reception Report On/Off SettingDisabled7-82 ‹I-Fax Reception Report Request Timeout Setting1 hour7-82 ‹Number of Resend Times at Reception Error27-82 ‹Maximum Size of E-mail AttachmentsUnlimited7-82 ‹Rotation Sending SettingAll Enabled7-83 ‹Printing Page Number at ReceiverEnabled7-83 ‹Recall in Case of Line BusyTimes: 2, Interval 3 min.7-83 ‹Recall in Case of Communication ErrorTimes: 2, Interval 3 min.7-83 XI-Fax Receive Settings7-83 ‹Auto Receive Reduce SettingEnabled7-83 ‹Duplex Reception SettingDisabled7-83 ‹Set Address for Data Forwarding– 7-83 Direct SMTPDisabled Add Hostname or IP Address TooDisabled Hostname or IP Address– ‹Letter Size RX Reduce Print*4Disabled7-84 ‹Receiving Date & Time PrintDisabled7-84 ‹A3 RX Reduce*4Disabled7-84 ‹POP3 Communication Timeout Setting60 sec.7-84 ‹Reception Check Interval Setting5 min.7-84 ‹I-Fax Output SettingVaries depending on the machine configuration7-84 XAllow/Reject Mail or Domain Name SettingAll Invalid7-84 ItemFactory default settingPage Downloaded From ManualsPrinter.com Manuals
7-39 SYSTEM SETTINGS Contents Document Filing Settings ItemFactory default settingPage ■Document Filing Settings7-85 ●Other Settings7-85 XDefault Mode SettingsSharing Mode7-85 XSort Method SettingDate7-85 XAdministrator Authority Setting 7-85‹Delete FileDisabled ‹Delete FolderDisabled ‹Change PasswordDisabled XDelete All Quick Files 7-85‹Delete– ‹Delete quick files at power up (protected files excluded)Enabled XDefault Colour Mode SettingsMono2 (Send Allowed Mode)7-85 XDefault Exposure SettingsAuto 7-85‹Original Image TypeText ‹Moiré ReductionDisabled XInitial Resolution Settings600 x 600 dpi7-85 XScan Complete Sound SettingMiddle7-86 XDefault Output Tray*1Varies depending on the machine configuration7-86 XDisable Stamp for ReprintingDisabled7-86 XBatch Print Settings 7-86‹Selection of [All Users] is not allowed.Enabled ‹Selection of [User Unknown] is not allowed.Enabled XErase Width Adjustment 7-86‹Edge Clearance Width10 mm (1/2) ‹Centre Clearance Width10 mm (1/2) XCard Shot Settings 7-86‹Original SizeX: 86 mm (3-3/8), Y: 54 mm (2-1/8) ‹Fit to Store SizeDisabled Downloaded From ManualsPrinter.com Manuals
7-40 SYSTEM SETTINGS Contents *1 When the exit tray unit is installed. *2 When the Internet fax expansion kit is installed. *3 When the facsimile expansion kit is installed. ●Document Output Options 7-87 XPrint ‹CopyEnabled ‹PrintEnabled ‹Scan SendDisabled ‹Internet Fax Send (Incl. PC-I-Fax)*2Disabled ‹Fax Send (Incl. PC-Fax)*3Disabled ‹Scan to HDDEnabled XScan Send ‹CopyDisabled ‹Scan SendEnabled ‹Internet Fax Send (Incl. PC-I-Fax)*2Disabled ‹Fax Send (Incl. PC-Fax)*3Disabled ‹Scan to HDDEnabled XInternet Fax Send*2 ‹CopyDisabled ‹Scan SendDisabled ‹Internet Fax Send (Incl. PC-I-Fax)Enabled ‹Fax Send (Incl. PC-Fax)Disabled ‹Scan to HDDDisabled XFax Send*3 7-87 ‹CopyDisabled ‹Scan SendDisabled ‹Internet Fax Send (Incl. PC-I-Fax)*2Disabled ‹Fax Send (Incl. PC-Fax)*3Enabled ‹Scan to HDDDisabled ●Automatic Deletion of File SettingsAll invalid7-87 ItemFactory default settingPage Downloaded From ManualsPrinter.com Manuals
7-41 SYSTEM SETTINGS Contents List Print (Administrator) *1 When network connection is enabled. *2 When the application integration module is installed. Security Settings ItemFactory default settingPage ■List Print (Administrator)7-88 ●Administrator Settings List–7-88 ●Image Sending Activity Report–7-88 ●Data Receive/Forward List–7-88 ●Web Settings List*1–7-88 ●Metadata Set List*2–7-88 ItemFactory default settingPage ■Security Settings7-89 ●SSL Settings 7-89 XServer Port ‹HTTPSEnabled ‹IPP-SSLDisabled ‹Redirect HTTP to HTTPS in Device Web Page AccessDisabled XClient Port ‹HTTPSEnabled ‹FTPSEnabled ‹SMTP-SSLEnabled ‹POP3-SSLEnabled ‹LDAP-SSLEnabled XLevel of EncryptionLow ●IPsec SettingsDisabled7-89 ●IEEE802.1X SettingDisabled7-89 Downloaded From ManualsPrinter.com Manuals
7-42 SYSTEM SETTINGS Contents Enable/Disable Settings ItemFactory default settingPage ■Enable/Disable Settings7-90 ●Printer Condition Settings7-90 XDisable Blank Page PrintDisabled7-90 ●User Control7-90 XDisabling of Printing by Invalid UserDisabled7-90 ●Operation Settings7-90 XCancel Auto Clear TimerDisabled7-90 XDisabling of Job Priority OperationDisabled7-90 XDisabling of Bypass PrintingDisabled7-90 XDisable Auto Key RepeatDisabled7-90 XDisabling of Clock AdjustmentDisabled7-90 XDisabling of Covers/Inserts ModeDisabled7-90 ●Device Control7-90 XDisabling of Document FeederDisabled7-90 XDisabling of DuplexDisabled7-90 XDisabling of Large Capacity Cassette*1Disabled7-90 XDisabling of Optional Paper Drawer*2Disabled7-90 XDisabling of Tray SettingDisabled7-90 XDisabling of Finisher*3Disabled7-90 XDisabling of OffsetDisabled7-90 XDisabling of Stapler*3Disabled7-90 XDisabling of Punch*4Disabled7-90 XDisabling of Master Machine ModeDisabled7-91 XDisabling of Slave Machine ModeDisabled7-91 ●Copy Function Settings7-91 XDisabling Deletion of Job ProgramsDisabled7-91 XDisabling of Bypass-Tray in Duplex CopyDisabled7-91 XDisabling of Auto Paper SelectionDisabled7-91 ●Printer Settings7-91 XProhibit Notice Page PrintingEnabled7-91 XProhibit Test Page PrintingDisabled7-91 XExclude Bypass-Tray from Auto Paper SelectDisabled7-91 XDisabling of USB Memory Direct PrintDisabled7-91 XDisabling of Network Folder Direct PrintDisabled7-91 Downloaded From ManualsPrinter.com Manuals
7-43 SYSTEM SETTINGS Contents *1 When a large capacity tray is installed. *2 When a stand/1 x 500 sheet paper drawer / stand/2 x 500 sheet paper drawer is installed. *3 When a saddle stitch finisher or finisher is installed. *4 When a punch module is installed. *5 When network connection is enabled. *6 When the Internet fax expansion kit is installed. *7 When the facsimile expansion kit is installed. Change Administrator Password ●Image Send Settings7-91 XOther Disabling7-91 ‹Disable Switching of Display OrderDisabled7-91 ‹Disable Scan Function 7-91Disabled USB Memory ScanDisabled XSettings to Disable Registration7-91 ‹Disable Registering Destination from Operation PanelAll disabled7-91 ‹Disable Registering Destination on Web Page*5All disabled7-92 ‹Disable Registration of ProgramAll disabled7-92 ‹Disable Registration of Memory BoxAll disabled7-92 ‹Disable Destination Registration Using Global Address Search*5All disabled7-92 ‹Disable Registration Using Network Scanner Tools*5Disabled7-92 XSettings to Disable Transmission7-92 ‹Disable [Resend] on Image Send ModeDisabled7-92 ‹Disable Selection from Address BookAll disabled7-92 ‹Disable Direct EntryAll disabled7-92 ‹Disable PC-I-Fax Transmission*6Disabled7-92 ‹Disable PC-Fax Transmission*7Disabled7-92 ●Document Filing Settings7-92 XDisable Stamp for ReprintingDisabled7-92 XBatch Print Settings 7-92‹Selection of [All Users] is not allowed.Enabled ‹Selection of [User Unknown] is not allowed.Enabled ItemFactory default settingPage ■Change Administrator PasswordSee TO THE ADMINISTRATOR OF THE MACHINE in the Safety Guide.7-93 ItemFactory default settingPage Downloaded From ManualsPrinter.com Manuals